Item 1

Amount

Earth filling with brought out soil in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift.

Providing and fixing of Short blasted paver blocks "i" shape, "wave " shape, "rectangular" shape, "square "shape ,60mm thick, for colour paver inclusive of material cost,tax, tranportation and unloading.(rate-rs. 1350/m2) considering cement mortar(1:4)

Providing & fixing fine dressed machine cut sand stone Stone steps (Treads & risers) with round nising fixing in Cement mortar 1:2 (50mm to 60mm thick)

Providing and fixing of RED MANDANA cobble stone of size 6"x6"x6" in position as per approved design and drawing in cement mortar 1:4 including making smooth surface dressed fixing and jointing / pointing with cement mortar 1:4 using pigment as per drawing and instruction of engineer incharge complete in all respect

Providing and fixing of Black Kaddapa cobble stone of size 4"x4"x3" in position as per approved design and drawing in cement mortar 1:4 including making smooth surface dressed fixing and jointing / pointing with cement mortar 1:4 using pigment as per drawing and instruction of engineer incharge complete in all respect

Supply and fixing of HI RIB roofing system manufactured out of 0.50mmTCT (Total Coated Thickness) high tensile zinc aluminum alloy coated with an alloy about 55% aluminum, 43.5% zinc&1.5% silicon Precoated Galvalume high tensile cold rolled steel as per AS 1397, coating class AZ 150 (min. 150 gms/m2Zinc aluminum alloy coating mass, total both side 550 Mpa yield strength) conforming to AS 1397/ASTM A792 of approved colour.Sheets to have wide pans and 28-30mm.Hi-Ribs at 200- 250 mm Centers and a cover width of 1010 mm and an overall width of 1050-1060mm. Sheets shall be fixed by means or self-drilling self-tapping hot dip zinc coated climaseal polymer coated hexed fasteners of size12x14x55mm long of Roofix or equivalent. The sheets shall be supplied in custom lengths as per design and details. Sheet to be Trimdeck of TATA bluescope or equivalent. The rate shall include bending as per profiles in drawings. The colour to be approved by the consultant before installation. The contractor is to provide the sample colours for approval. Only finished measurements will be paid for. The end lap of sheet to be minimum 150mm and sealed with silicon sealant. The side lap to be minimum 50mm or as per manufacturer's specifications. Final complete executed areas will be paid for. Item to include Neoprene gasket between M.S. member and roofing sheet. Item to include making sleeves for tie member and making the junction water tight.

Providing and fixing 18 mm thick Black Granite stone slab shot blasted flammed brushed and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete

Providing and fixing 30 mm thick Black Granite stone slab shot blasted flammed brushed and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete

Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and fixing in position Jodhpur Stone / Kerb stone of size 150 mmx300 mm and cut to shape as per with exposed face fine chiesel dresses fixing and jointing/pointing with cement mortar 1:4 using pigment as per drawing and instruction of Enineer Incharge complete in all respect.

Providing and fixing Cast Iron Railling complete as per design and drawing including casting, grinding and fixing complete in all respect as directed by engineer incharge.

Providing and fixing of glass mosiac tiles of ITALIA or equivalent make of size 20 x20 mm with white glass mosiac adhesive of 1.5 mm beding and epoxy grout of semitrone or equivalent make complete as per manufectures specifications and direction of EI, inside the steam cubicles

Construction of Kiosk of size 2.4 x 2.4 x 3.0 mtr with M-30 precast panels with interlocking arrangement of wall & roof, including providing and fixing Rolling shutter with locking arrangement & platform of 60 cm but excluding flooring, electrical & plumbing, all complete as per drawing and design.

Supplying & fixing "PLASTIC DUSTBIN" as per approved design ( size of dustbin inner dia 50cm , outer dia 65 cm & inner depth 67 cm ,outer height 75 cm.) complete in all respect

Providing & Placing Garden Bench of size 1.8 m X 0.45 m X 0.75 m made out of M.S. Rectangular hollow Section with cast iron hand rest on both side as per drawing & design complete in all respect

Providing,carving and Fixing of interpretive signages in Bansi paharpur stone of size 1000x1300x50 mm on inclined plane .Engraving,painting of latters as per drawing and design.The signage stone shall be fixed on the post of same stone of size 300x 300 x 1050 above ground and 1/3 of total heigt of post shall be embedded in ground with neccesary earthwork and concreting etc.complete as per details and drawings and as directed by engineer incharge

Providing and fixing find dressed sand stone Arches of overall size 1.5 x 2.4 mtr including pillars of size 150 mm x 150 mm, Mehrab 75 mm thk., dab stone of size 150 x 150 mm and 50 mm thk stone Jali including molding and carving as per architectural drawing and design complete in all respect as per directed engineer in charge.

Providing and fixing of Fountain including all civil work ( RCC, Water proofing, masonry, plaster ) with big marble / granite bowl of size 13 mtr diameter x 3mtr high and marble/granite boundary edge external 8500 MM (Approx.), complete as per drawing and details and as per direction of Engineer in charge , excluding machenical, electrical and plumbing work, including operation and maintenance of 3 years after completion of project.

Providing and fixing Gazebo ( Chattri ) made with precast concrete including pillars, mehrab, toddies, chajja, dome etc. Complete as per drawing and detail of overall size 2.40 x 3.00 x 3.60 mtr.

Providing and Installation of Water Cooler for storage capacity 150 liters with normal cooling capacity 150 liters per hr including 3 nos. of faucets and approximately Hundred kg weight of Blue Star or equivalent complete in all respect as per Direction of Engineer in charge .

Internal Wiring Supply, installation, connection, testing & commissioning of following outlet points as per Specification & IS. The unit rate for the point shall consist of the circuit wiring from LDB or switch board to outlet point through MCB / switch as required & including the outlet points with connector & sockets as per specification. All the wiring, outlet points shall be done in a surface / concealed manner with ISI approved medium duty, rigid FR PVC, ISI conduit of minimum 25 mm. dia. using 650 V FRLS copper conductor wire, modular switches with suitable plate, PVC / Metal back box with brass chromium / cadmium plated machine screws etc. Point Wiring Wiring for the following light points with 3nos. 1.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps single pole rocker operated flush mounted switch of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling.

Short point upto 3.0 mtrs. From tapping point to outlet via switch

Medium point above 3.0 mtrs. Upto 6.0 mtrs. tapping point to outlet via switch

long point above 6.0 mtrs. Upto 10.0 mtrs. tapping point to outlet via switch

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & eirthwire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box covered with appropriate front plate modules erected concealed in wall / ceiling. Primary light point controlled by two, two way 6 A switch

Wiring for the 250 volts single phase and neutral 6 amps switched socket outlet with 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted in 25 mm dia medium gauge PVC Conduit including providing and fixing of 6 amps 5 pin switch socket outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. One 6 A x 5 pin 250 Volt socket outlet point controlled by one 6 A switch located on board.

Short point Upto 3.0 mtrs.

Medium point above 3.0 mtrs. Upto 6.0 mtrs.

long point above 6.0 mtrs. Upto 10.0 mtrs.

Providing and erecting 1.6 - 1.8 mm thick FIA approved and ISI mark (embossed) RIGID PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following type of erection. 2) For erecting concealed in RCC / Brick wall/slab along with continuous fish wire to draw mains, laid in approved manner with plastering by cement mortar & finishing the surface to match the wall/ceiling. Supply and laying of 25 mm rigid PVC pipe of 1.6-1.8 mm thickness

Supply and laying of 32 mm rigid PVC pipe of 1.6-1.8 mm thickness

Supply and laying of 40 mm rigid PVC pipe of 1.6-1.8 mm thickness

MAINS : ( not for Point wiring ) Supplying and Laying of mains with Cu. PVC insulated flexible wire with ISI and FIA approval for 650 V/ 1100 V with earth wires of Cu. PVC insulated flexible wires with ISI approval for 650 V/ 1100 V as earth wires to be drawn in Suitable dia rigid PVC Pipe of Heavy Gauge ( Scope Also includes Supply of with. ) Supplying and Laying of 4 nos. of 10 sq mm Cu. FRLS flexible wires with 2 nos 4 sqmm Cu. FRLS flexible wires to be drawn in 2 nos. of 40 mm dia Pipe

Supplying and Laying of 4 nos. of 6 sq mm Cu. FRLS flexible wires with 2 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 2 nos. of 40 mm dia Pipe

Supplying and Laying of 2 nos. of 10 sq mm Cu. FRLS flexible wires with 1 nos 4 sqmm Cu. FRLS flexible wires to be drawn in 40 mm dia Pipe

Supplying and Laying of 2 nos. of 6 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 40 mm dia Pipe

Supplying and Laying of 2 nos. of 4 sq mm Cu. FRLS flexible wires with 1 nos 2.5 sqmm Cu. FRLS flexible wires to be drawn in 25 mm dia Pipe

Supplying and Laying of 2 nos. of 2.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS flexible wires to be drawn in 25 mm dia Pipe

Supplying and Laying of 2 nos. of 1.5 sq mm Cu. FRLS flexible wires with 1 nos 1.5 sqmm Cu. FRLS flexible wires to be drawn in 25 mm dia Pipe

Supply & Laying of 1.5 sq mm x 3 core round flexible wire in Prelaid pipe / Raceway.

Supply & Laying of 2.5 sq mm x 3 core round flexible wires in Prelaid pipe / Raceway.

Distribution Board Supply, Assembling, grouting, leveling Connecting & testing D.B of IP 43 of specified make. Distribution Board-VTPN Supply, Erecting, testing and commissioning of only VTPN D.B. with space for FPMCCB / FPMCB as incoming and 12 TPMCB / SPMCB as outgoing per phase (i.e. 12 way VTPN D.B.) of Legrand Make Cat. No. 607752

Supply, Erecting, testing and commissioning of only VTPN D.B. with space for FPMCCB / FPMCB as incoming and 8 TPMCB / SPMCB as outgoing per phase (i.e. 8 way VTPN D.B.) of Legrand Make Cat. No. 607751

Distribution Board-TPN Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 8 SPMCB as outgoing per phase (i.e. 12 way per phase D.B.) of Hensel Make KV9448M

Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 4 SPMCB as outgoing per phase (i.e. 8 way per phase D.B.) of Hensel Make KV9336M

Distribution Board-SPN Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 12 SPMCB as outgoing per phase (i.e. 16 way D.B.) of Hensel Make KV9118M

Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 8 SPMCB as outgoing per phase (i.e. 12 way D.B.) of Hensel Make KV9112M

Supply, Erecting, testing and commissioning of SPN D.B. PPI type with space for DPELMCB as incoming and 4 SPMCB as outgoing per phase (i.e. 8 way D.B.) of Hensel Make KV7109M

Cable Termination SITC of Cable end termination of the following XLPE insulated PVC sheathed aluminum/copper conductor armored cables of 1100 volt grade including supplying and fixing of bimetallic Long neck crimping lugs, Brass glands with earthing.

95 sq.mm x 3.5c Al. cable

70 sq.mm x 3.5c Al. cable

50 sq.mm x 3.5c Al. Cable

35 sq.mm x 3.5c Al. Cable

25 sq.mm x 4 c Al. cable

16 sq.mm x 4 c Al. cable

10 sq.mm x 4 c Al. cable

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed.

Supply of Additional fan rod made out of 10 gauge painted GI pipe with all required accessories for fan suspension.

Exhaust Fans : SITC of light duty propeller 225mm dia exhaust fans

Earthing Providing and laying of following tined copper / GI plate electrode, with 2 Nos 50 x 6 mm copper strips from earth plate electrode to inspection chamber, 50 mm dia medium class GI pipe, CI funnel with 20 gauge GI wire mesh, masonry chamber 1000 x 500 mm with concrete base C I heavy duty / chequered plate manhole cover with frame painted with bitumastic paint and packing with mixture of charcoal and common salt around plate electrode including digging of pit up to permanent moisture level and as per soil condition but not less than 3 meters and back filling as required. 600 x 600 x 3.15 mm cu.plate

Providing & doing earthing electrode for equipment earthing as specified in IS:3043 - 1987 for equipment complete with : Earthing Electrode Cu. , 50 MM. Dia 3 Mtr. Long. ( LPI Make ) Contractor is responsible to achieve the Earthing Resistance less than 1 Ohm.

Earth wire/strips : Supply and laying copper earthing strips for interconnecting the earthing stations, panels, DB's etc. in built up trenches, on walls/ceiling, buried in ground generally as specified and shown on drawings complete with : fixing accessories Corrosion protection of buried conductors with bituminous coating and covered with PVC tapes.

Providing and erecting HOT deep Galvanized strip or G.I. wire 8 to 16 S.W.G.25 x 3 mm cu. Tape

Providing and erecting HOT deep Galvanized strip or G.I. wire No.8 gauge bare cu. earth wire

Earth Link : 50mm x 6 mm earth link fixed by necessary screws on wall. ( 1 mtr Long )

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II ) Anti Rodent type with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and backfilling the same to make ground as per original.

50 mm dia

90 mm dia

120 mm dia.

Providing and fixing of 3.220 Mtr high heritage electrical pole and fixture made of gray cast iron or modular cast iron sanded and metallised in a polyster powder coating finish in RAL or FUTURA AKZO noble colors,with including service door at top and bottom of size 118mm/206mm X 480 mm of approximate weight 180 Kg.The luminiur is mounted on the top of the column by a dia 42 mm luminiur monting bracket with faded and dia 27 pdg(3/4th inch G) or 34 pdg (1 inch G) etc complete as per manufacturer specification complete in all respect as per approved drawing and design as directed by engineer incharge.

Providing and fixing of 4.00 Mtr high heritage electrical pole and fixture made of gray cast iron or modular cast iron sanded and metallised in a polyster powder coating finish in RAL or FUTURA AKZO noble colors,with including service door at top and bottom of size 118mm/206mm X 480 mm of approximate weight 225 Kg.The luminiur is mounted on the top of the column by a dia 42 mm luminiur monting bracket with faded and dia 27 pdg(3/4th inch G) or 34 pdg (1 inch G) etc complete as per manufacturer specification complete in all respect as per approved drawing and design as directed by engineer incharge.

Providing and fixing of 6.00 Mtr high heritage electrical pole and fixture made of gray cast iron or modular cast iron sanded and metallised in a polyster powder coating finish in RAL or FUTURA AKZO noble colors,with including service door at top and bottom of size 118mm/206mm X 480 mm of approximate weight 275 Kg.The luminiur is mounted on the top of the column by a dia 42 mm luminiur monting bracket with faded and dia 27 pdg(3/4th inch G) or 34 pdg (1 inch G) etc complete as per manufacturer specification complete in all respect as per approved drawing and design as directed by engineer incharge.

Wiring for the light points as above but with IP66 Switch board with IP 66 Box and 6 Amp / 16 amp Switch. 250 Volt one 6 A IP66 switch located on IP 66 box board of Legrand cat. No. 673000 & 684638 or SCAME make

Primary light point controlled by one SP MCB ( Same as above item but controlling with SP MCB )

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked FRLS PVC insulated multistrand copper wires, in existing pipe duly erected complete with earth continuity and necessary connection with primary light with accessories erected on Metal/ PVC box covered with 3 mm thick laminated sheet for concealed wiring.

Wiring for the 250 volts single phase and neutral 16 amps switched socket outlet with 2.5 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 16 amps 5 pin switch socket outlet of approved quality color make & design in 2 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

DO - as 1.1.6 but with4 sq.mm wire for phase & Neutral & 2.5 sq. mm for Earthing

Wiring for the Three phase and neutral 32 amps polycarbonate industrial 5 pin (IP 65/66) socket outlet with 32 amps Four pole MCB in a poly carbonate enclosure with 4 x 6 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 50 mm dia medium gauge PVC Conduit including providing and fixing of 32 amps socket in poly carbonate enclosure and neutral & earthing pin of the socket and with FP MCB of approved quality color make & design in 2 mm thick GI box / polycarbonate enclosure and earthing of fixtures and the outlet box with 2 nos. of 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Wiring for the Single phase and neutral 32 amps polycarbonate industrial 3 pin (IP 65/66) socket outlet with 32 amps Double pole MCB in a poly carbonate enclosure with 2 x 6 sq.mm FRLS flexible copper conductor 1100 volts grade wires of approved make in concealed or surface mounted 25 mm dia medium gauge PVC Conduit including providing and fixing of 32 amps socket in poly carbonate enclosure and neutral & earthing pin of the socket and with DP MCB of approved quality color make & design in 2 mm thick GI box / polycarbonate enclosure and earthing of fixtures and the outlet box with 2 nos. of 2.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire.

Supply & Laying of 4 sq mm x 4 core round flexible wires in Prelaid pipe / Raceway.

Dual Channel Timer equivalent to Theben Make TR612 TOP

20 Amp DP Din rail Mounted Contactor Equivalent to MDS make Cat. No. 004049

40 Amp DP Din rail Mounted Contactor Equivalent to MDS make Cat. No. 004068

Distribution Board-TPN Supply, Erecting, testing and commissioning of only TPN D.B. PPI type with space for FPMCB as incoming and space for DPELMCB and 12 SPMCB as outgoing per phase (i.e. 16 way per phase D.B.) of Hensel Make KV9354M

125 Amp. MCCB ( 16 KA ) with the Enclosure & Both Side Cable end Box with the Handle with Spreader Link with On off Indicating Lamp

Light Fixtures & Fans Installation, Testing & Commissioning of any kind of Light Fixtures with all necessary Lamps, Ballast etc.. Complete in all Respect Contractor has to install the fitting as per architect / Consultants final approval. 1 x 28 W type light fixture with 28W lamp of Philips make TWG 207 / 1 x TL5 28W Adreno V2 or GE make

1 x 11 watt mirolta type light fixture with lamp equivalent to Philips make FMS200/111 or GE make

SITC of 400W Symmetric IP65 Floodlight with housing made of Powder coated non corrosive high pressure die cast alumunium,symmetrical preanodised alumunium reflector.For easy maintenance lamps & gear should be easy accssiable from hinged front window & quick release stainless steel clip. Luminaire should be with Heat resistant EPR gasket for sustained IP65 protection & Heat resistant toughned glass.Lumianire should be complete with 400W SONT lamp & Complete with Open construction Electromagnetic ballast PF>0.85 with PF improvement capacitir, Watt loss should not be more than 42W.Similar to Philips SWF331 400W SONT

SITC of IP67 & IK10 LED Ground Burial of 16W. Beam Angle : 12D. Luminaire should be made of pressure die cast alumunium. Similar to Philips BBP330 or equivalent from approved makes.

Supply, Testing & Commisioning of 8W LED Bollard with 3000K color temperature,housing of fixture should be made of extrusuion aluminum & polycarbonate diffuser.IP classification of whole luminiare should be not less than IP65 & IK protection should not be less than IK10.The light outshould be glare free it should be with translucent Polycarbonate diffuser. Philips BCP 150 or equivalent from approved makes.

SITC of IP 67 - In ground 70 watt MH Integral - Cool Glass, Internally tiltable Fitting of NVC make NEM026 -A1/70 / Kesselec Schreder make Terra Midi / Simes make with all accessories and control gear Lamps etc…complete in all respect

SITC of LED Steplight.Housing of Luminaire should be made of Pressure die cast alumunium Housing & Polycarbonate diffuser. IP Protection should be IP67. Power Consumption 4W. Light Fixtures with all necessary Control gear, all accessories etc.. Complete in all Respect Philips make BWG150 or Schreder or GE make

SITC of 4W IP67 & IK10 LED Ground burial..Housing of Luminaire should be made of Pressure die cast alumunium Housing & Polycarbonate diffuser. Light Fixtures with all necessary Control gear, all accessories etc.. Complete in all Respect Philips make BBG150 or Schreder or GE make

SITC of IP65 70W CDMT Flood Light. Luminaire Should be with Rotational Symmetric Optics.Light Fixtures with all necessary lamp, Control gear, all accessories etc.. Complete in all Respect Philips make RVP339 70W CDMT or Schreder or GE make

SITC of IP65 150W MHNTD Flood Light. Luminaire Should be with Rotational Symmetric Optics.Light Fixtures with all necessary lamp, Control gear, all accessories etc.. Complete in all Respect of Philips make MWF231 150W MHNTD or Schreder make or GE make

SITC of IP66 LED Flood Light. Lumen Output : 7000 lumens. Efficacy should be 90lm/W. Power Consumption should not exceed 80W. Life of Luminaire should be 50000 burning hrs witj 70% lumen maintenece. Light Fixtures with all necessary Control gear, all accessories etc.. Complete in all Respect Philips make BVP120 LED 70S or Schreder or GE make

SITC of 4' IP65 Linear LED Light Fixture. Luminaire should have provision of End to End Connection.Lumen Output should be 1200 lumens & Power Consumtion should be 20W. Light Fixtures with all necessary Control gear, all accessories etc.. Complete in all Respect Philips make Vaya Lienear or OSRAM Traxon or ACDC make

SITC of 2' IP65 Linear LED Light Fixture. Luminaire should have provision of End to End Connection.Lumen Output should be 600 lumens & Power Consumtion should be 10W. Light Fixtures with all necessary Control gear, all accessories etc.. Complete in all Respect Philips make Vaya Lienear or OSRAM Traxon or ACDC make

SITC of IP54 70W Decorative Metal Hallide Posttop Light Fixtures with all necessary Lamps, Ballast, accessories etc.. Complete in all Respect of Philips make HPC101 / HPC 102 / HPC 103 or Schreder of Ligman make

SITC of IP65 LED Rope Light 8 watt per meter with all accessories and Control gear complete in all respect

SITC of IP67 - IK09 inground, walkover 14 Watt T5 linear with Reflector ( as specified by Architect ), Housing made from Die cast / extrusion Alluminium with toughned Glass with all necessary lamp, Control gear, all accessories etc.. Complete in all Respect of Ligman make or Reiss make or Simes make

SITC of IP 67 - 16 watt PCB Mounted LED Strip 4 (Aluminium Extruded Batten with reflector / cover on top) Module with all necessary Ballast, Transformer, wiring up to the Light Point, with all necessary fixing accessory of Philips, Osram or VIN make

SITC of Water Tight Junction Box of Hensel make Cat. No. KG9003IN or equivalent. With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight Glands only )

SITC of Water Tight Junction Box of Hensel make Cat. No. KG9003IN ( For Poles ) / KF 9500 ( For Others ) or equivalent. With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight Glands only )

Section Feeder Panels Supplying, unloading at site, shifting to site, assembling, leveling, grouting, erecting, Testing, & Commissioning double compartmentalized Street light control panel with IP 65 protection & Enclosure should be 3MM thick M.S. with passivation process & FRP / GRP lining & fabricated from 10 Gauge M.S. sheet & folded channel totally enclosed cubical type with made out of Modular Panel Box System of high quality polycarbonate thermoplastic, Degree of Protection IP 65, in accordance with IEC 60 529, type tested in accordance with IEC 60 439 – 1. with pad lock arrangement. The successful tenderer will have to prepare general arrangement with dimensions & get it approve through Architect/ Consultant. All civil work including RCC platform for street light panel should be in scope of Electrical contractor complete in all respect as per detail drawing and directed by engineer in charge. with the 600 mm height MS angle covered stand. (From Spelsberg / HENSEL only) The panel board shall be made up of high quality polycarbonate thermoplastic, shock proof, anti-corrosive, acid & chemical resistant, fire retardant, self extinguishing, highly impact resistant, halogen free, silicon free, recyclable, having internally embedded gasket. The switchboard (panel) shall have provision for future expansion & shall be modular in construction. The bus bars shall be connected with C type clamps without any drilling on the bus bars. The panel shall be in accordance with IEC 60 439 – 1 (Fully TTA). The Degree of Ingress Protection shall be in accordance with IEC 60 529.

SITC of the IP 65 Section feeder panel for the Street Lighting Consisting of following Incoming : 100 Amp FP MCCB with the spreader link with earth leackage relay R-Y-B-On-Off indicating Lamp with control fuse. Bus bar : Set of 100 A. FP tinned copper bus bars of EC. grade & adequate capacity, size & insulated with color tape & should be connected with jointless system. Auto/Manual bypass switch with indicating lamp Meter : VAF meter equivalent to Enercon make ELF 3259 with 63/ 5 A Class 1 ct. Outgoing : MCB's Should be of 10 KA. Timer Equivalent to Theben make Astronomical type with the battery back up : 4 nos. 40 amp. FP Power Contactor : 1 nos. 40 amp. DP Power Contactor : 6 nos. 40 Amp. FP MCB : 2 nos. 6 -32 Amp. FP MCB : 2 nos. 6 - 32 amp. SP MCB : 15 nos. 5 KVAR Capacitor with the 40 amp TP capacitor duty contactor with the 10 minute time delay relay. Panel Should Have lockable Space to incorporate the 2 nos of the 3 phase energy meter with its main switches with separate cable entry. & Panel also have the capacity to incorporate 1 no. of energy saver unit with separate compartment & Separate door.

SITC of IP66 Water Tight Junction Box 167mm x 125mm x 82mm With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight IP 66 Polyamide Glands, open Holes should be sealed with the IP65 Grommets only ) J. B. Should be provided with Hensel make cable connectors to connect 1 nos. of 6/10 sq. mm. x 4 core cables+ 4-5 nos. of 4 sq. mm x 4 core wires + Earthing wires. of Hensel make cat. no. KD5105 + Connectors + IP65 Glands + IP65 Grommets

SITC of IP66 Water Tight Junction Box 139mm x 115mm x 70mm With necessary clamp for mounting of the J.B. ( All the cable / wire connections to the JB shall be with the Water tight IP 66 Polyamide Glands, open Holes should be sealed with the IP65 Grommets only ) J. B. Should be provided with Hensel make cable connectors to connect 1 nos. of 6/10 sq. mm. x 4 core cables+ 4-5 nos. of 4 sq. mm x 4 core wires + Earthing wires. of Hensel make cat. no. KD5065 + Connectors + IP65 Glands + IP65 Grommets

SITC of IP68 water tight cast resin junction box 140mm x 109mm with necessary accessories like funnel,ventilation seals and disposable gloves, connector of Splesberg Abox GT 100-10 or Hensel make

Miscellaneous Supplying & Erecting conventional type Carbon Dioxide fire extinguishers of ISI approved of 4.5 kgs

Supplying & Erecting automatic emergency light with maintenance free battery for 20 watts tube.

Providing and erecting danger notice board for medium voltage installation to be erected as per I.S. The board should be 150 x 150 mm.

Providing printed instruction chart both in English & REGIONAL LANGUAGE & duly framed out on glass for treatment of person suffering from Electric shock.

Supplying , fabricating and installation of various sizes MS race way / junction boxes/clamps/hangers for Cable Tray, Light Fixture made out of specified size sheet/Angle/Flat/rod/ channel etc as per design with all necessary accessories like bend, junction boxes, coupler, Anchor fastener, Bolt Nuts, etc.. & work from MS structure for other work with anchor fastener of Hilti make and necessary hardware with necessary welding has to be done to complete the job from ISA / ISMC / PLATE. The job also includes to paint the structure with two coats of red oxide and two coats color of enamel paint as approved and recommended by consultant. Complete in all respect to be installed at any height with all necessary arrangements. Contractor has to complete the work up to satisfaction of Consultant

Supplying , fabricating and installation of various sizes made from SS 316 grade / Fitting covering Jali / race way / junction boxes/clamps/hangers for Cable Tray, Light Fixture made out of specified size sheet/Angle/Flat/rod/ channel etc as per design with all necessary accessories like bend, junction boxes, coupler, Anchor fastener, Bolt Nuts, etc.. & work from MS structure for other work with anchor fastener of Hilti make and necessary hardware with necessary welding has to be done to complete the job from ISA / ISMC / PLATE. Complete in all respect to be installed at any height with all necessary arrangements. Contractor has to complete the work up to satisfaction of Consultant

Manhole Construction of brick masonry pulling chamber 450 mm x 450 mm inside clear size and depth up to 0.6 meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 450 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of the Engineer In charge complete in all respect.

Construction of brick masonry pulling chamber 600 mm x 600 mm inside clear size and depth up to 0.60 meter with 350 mm thick masonry in cement mortar proportion 1:5,cement finish cement plaster in CM proportion of 15 mm thickness from inside with 150 mm thick PCC at bottom with top slab minimum 200 mm thickness in M20 grade with reinforcement. The rate shall be inclusive of providing and fixing frame and 600 mm dia cover of FRC for the Heavy Duty. Rate also inclusive of excavation and back filling & clearing the site by removing debris & Shifting of the debris & making site good As per the Instruction of the Engineer In charge complete in all respect.

P & F IP-43 protected post top lantern suitable for HPMV/ HPSV/ MLL lamp with integral control gear cast aluminium housing comprising of copper ballast, capacitor, ignitor covered with suitably gasketed conical / spherical / elliptical polyethylene moulded diffuser of dia approx. 605 mm, prewired with pvc insulated copper conductor including making connection testing etc. as required (without lamp)

1 X 80 Watt HPMV Lantern

P & F IP65 protected decorative lighting luminaire Post top/ Bollard suitable for following lamps, made of powder coated cast aluminium housing, moulded acrylic lamp compartment with built in anodized aluminium louvers for lamp shielding and glare control, metallic lid top cover, including the cost of control gear complete in all respect. Bollards are including cost of decorative base pipe/ plate. (without lamp) 18/13 Watt CFL Bollard

SITC of high mast lighting system (as per CP3-TR7/1996 of ILE, UK) consisting of totally hot dip galvanised by single dipped method high mast, lantern carriage suitable for up to 12 nos luminaries with welded arm, mast head frame assembly with full cover, aviation obstruction lights, double drum type self sustaining winch, integral power tool accesible from door with padlocking arrangement ( winch motor with control circuit) hot dipped galvanised heavy duty pipe lightening finial, suitable ropes (AISI 316, 7 / 19 costruction ), EPR insulated PCP sheathed trailing cable, outdoor type control panel for auto on / off, reverse / forward motor operation and CC foundation of M - 25 grade complete as required. The mast is constructed from mild steel plates (as per IS 5986 Gr. 510 ) cut and folded to form a polygonal section, telescopic jointed and welding as per BS 5135. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning of high mae the capacity to incorporate 1 no.

SITC of Nozzle line assembly for the parabolic fountain nozzles, made of 304 grade Stainless steel pipe (3 inch dia) with provisions to house the fountain nozzles and for connection to the pumps. (Make : DIVINE) including development of drawing / shop drawings (If required)

SITC of Foam Jet Nozzles half inch dia made of stainless steel(including universal, where needed), etc. as per approved by Architect. Make Divine including development of drawing / shop drawings (If required)

SITC of Submersible Open well Type Pump for the Vertical fountain nozzles of suitable flow rate. (4 pumps with discharge of 2000 LPM @ 12.5 Mtrs head (4 Working), including, all necessary indigenous accessories as required to complete the installation. (Make:- Crompton / Kirloskar) including development of drawing / shop drawings (If required)

SITC of Floor mounted uplighters, 12V/24 Wt underwater LED RGB lights (With Niche) in stainless steel body, as per approved by Architect. (Make:- Divine) including development of drawing / shop drawings (If required)

SITC of uPVC pipe 10 kg/sqcm class IV (IS : 4985) including injection moulded fittings with bosses where required e.g. tees, bends, clamps, flanges, couplings and adapters and jointing with adhesive approved by fittings manufacturers. (Make:- Supreme / Prince) including development of drawing / shop drawings (If required)

SITC of PVC Ball valves (up to 63 mm dia) and butterfly Valves (PN 1.6) with cast iron body with CF 8 disc, S.S. 410 spindle, supported with flanges, with GI nuts and bolts (75 mm ad above dia). (Make : PVC ball vales - Aqvastar ; Metallic - Zoloto/ Sant) including development of drawing / shop drawings (If required)

63 mm dia

75 mm dia

110 mm dia Butterfly valve

SITC of Electrical cables including conduits, etc. for the lights - 4 core 2.5 mm2 as per IS Code

SITC of Electrical cables including conduits, etc. for the pump - 3 core 6 mm2 Make Havells, Finolex, Polycab

SITC of Power supply for the LED lights 12V / 24 V as per direction of Engineer in charge. Make Divine including development of drawing / shop drawings (If required)

SITC of Electrical Panel with controls for pumps and lights as per direction of project in charge. Make Divine (IP54/55 water protected) including development of drawing / shop drawings (If required)

Providing, installing, testing and commissioning of monoblock pump as per following details: a) Pumps: Horizontal monoblock booster pump set with mechanical seal Material of Construction (M.O.C): Corrosion Resistant in general : Casing — Technopolimer : Impeller — Technopolimer : Shaft — Stainless Steel Motor: 2900 RPM; 1/3Ph 415V Protection - IP54 Min. Duty: Discharge ( each pump) :28 M3/hr @16 mtrs head (3 working 1 standby). Working Pressure : 1.5 kg/sq.cm. Details of Equipment offered (To be filled in by the tenderer) Pumps Make: ESPA Model: SILEN2 300M HP/ KW: 3 / 2.2 M.O.C : Casing —……………….. : Impeller — …………….. : Shaft — ……………….

Providing, installing, testing and commissioning of a vertical type pressure filter as per parameters given below : Filter Shell : Laminated polyester / Bobbin wound and fiberglass body with Polypropylene base, complete with lid, air vent, water purge, pressure gauge etc. Multiport Valve : Dia : 1000 MM (Min.) Working Pressure : 2.5 Kg/cm2 (Min.) Details of Filter offered (to be filled in by the tenderer) Make : Aqvastar / Pentair Model : Dia : 1000 MM (Min.) Test Pressure : 2.5 Kg/cm2 (Min.) Filtration Time : 7 Hrs Filtration Velocity : 40 m3/hrs/m2 Water body Volume : 580 M3

Providing, installing, testing and commissioning of following Pool Fittings :

a) ABS white plastic wall / floor inlet fitting suitable for glue jointing into 63 mm OD pipe

b) ABS white plastic suction nozzle suitable for thread jointing 50 mm OD pipe .

c). Pool drain fitting in stainless steel having 300 mm x 300 mm size stainless steel (grade AISI-304) grating complete with support frame, fixing screws etc.

Providing, laying and joining in position PVC pipes conforming to IS : 4985 : 1988 and suitable for the respective working pressures with all fittings and specials, e.g. couplings, tees, bends, reducers, bushes, male & female threaded adopters, screwed adaptors, flanged tail pieces, etc., jointing with solvent cement joints, complete in all respects, excluding excavation of soil & refilling, cutting chases / holes in walls, M.S support ,slabs, where required and making good etc.

50 mm dia. (OD) (10.0 kgf/sq cm.)

63 mm dia. (OD) (10.0 kgf/sq cm.)

75 mm dia. (OD) (10.0 kgf/sq cm.)

90 mm dia. (OD) (10.0 kgf/sq cm.)

110 mm dia. (OD) (10.0 kgf/sq cm.)

Providing and fixing of EPDM fully way ball valve ( minimum working pressure of 10 bar ) with operating handle of approved make. Make Aqvastar

63 mm dia

75 mm dia

90 mm dia

110 mm dia

Providing and fixing Dual plate (Wafer type) check valve (non return valve) of Class PN 10, having cast iron body ( AISI 316), disc, trim and spring of approved make. including a set of MS / PP flanges, required nos. of nut & bolts all complete. Make AIP

65 mm dia

80 mm dia

100 mm dia

Wiring of under water lights with 2C 2.5 sq.mm. PVC insulated copper conductor unarmoured cable in existing underground/surfaced conduits. (From Pumps to panel ). Also for the recirculation pumps.

Providing and fixing M S supports for pipes, etc in the plant room.

A unto S ump P ump: To supply and install a suitable automatic sump pump in the plant room sump to discharge any water out of exigency. This is good for the safety of pumps, etc. Make ESPA, discharge 15 M3 @ 4 Mtrs head with 35 mm solid handling

Providing, installing, testing and commissioning of UV system for clearing the water of all pathogens. Also reduces the quantum of chlorine requirement by almost 70%.

SITC of Nozzle line assembly for the fountain nozzles, in (32 mm size) uPVC pipes 15 kg/sqcm class V (IS:4985). (Make Supreme / Prince) including development of shop drawings(if required)

SITC of Bubbler Jet Nozzles 1" dia (including universal, where needed), uPVC nipples, etc. as per approved by Architect. Make Divine including development of shop drawings(if required)

SITC of Under water round fountain light, 12 V 18W RGB LED lights in stainless steel body, nozzle mounted as per approved by Architect.. (Make:- Divine) including development of shop drawings(if required)

SITC of Submersible Open well Type Pump for the Vertical fountain nozzles of suitable flow rate. (3 pumps with discharge of 1180 LPM @ 6 Mtrs head (3 Working), including, all necessary indigenous accessories as required to complete the installation.including development of shop drawings (if required)(Make:- Crompton / Kirloskar)

SITC of Wall mounted, 12V/24 Wt underwater LED lights in stainless steel body, as per approved by EIC. ( Make:- Divine ) including development of shop drawings(if required)

uPVC pipe 10 kg/sqcm class IV (IS : 4985) including injection moulded fittings with bosses where required e.g. tees, bends, clamps, flanges, couplings and adapters and jointing with adhesive approved by fittings manufacturers. (Make:- Supreme / Prince)

PVC Ball valves (up to 63 mm dia) and butterfly Valves (PN 1.6) with cast iron body with CF 8 disc, S.S. 410 spindle, supported with flanges, with GI nuts and bolts (75 mm ad above dia). (Make : PVC ball vales - Aqvastar / Cepex; Metallic - Zoloto/ Sant)

32 mm dia

63 mm dia

Electrical cables including conduits, etc. for the lights - 4 core 2.5 MM2 as per IS Code

Electrical cables including conduits, etc. for the pump - 3 core 4 MM2. Make Havells, Finolex, Polycab

Power supply for the LED lights 12V / 24 V as per direction of project in charge. Make Divine

SITC of Electrical Panel with controls for pumps and lights as per direction of project in charge. Make Divine (IP54/55 water protected) including development of drawings/shop drawing

SITC of Water switch TM, has a moulded plastic TWIN solenoid valve with low voltage coil with SS cover. ( AQVASTAR / DIVINE )

SITC of Water feature submersible pump 910 LPM @ 25 mtr head, including, all necessary indigenous accessories as required to complete the installation. (Make:- Crompton / Kirloskar)

SITC of COLOUR CHANGING RGB SPOT LIGHTS suitable to fixing in hanging arrangement (AQVASTAR / DIVINE )

SITC of Power supply for the above lights (Meanwell )

SITC of Under water junction box ( for cable connection between lights, Nozzle & transformer) (AQVASTAR /DIVINE )

Providing and laying Cable network 4 Core 2.5 mm2 ( BETWEEN JETS & PANEL) ( Havells, Finolex, Polycab )

Providing and laying Cable network 3 Core 6 mm2 ( BETWEEN pumps & PANEL) ( Havells, Finolex, Polycab )

Supply , installation , testing & commissioning of Nozzle line assembly for the above nozzles, in (32 mm size) uPVC pipes 10 kg/sqcm class IV (IS:4985). (Make SUPREME / ASTRAL)

Plumbing : Providing, laying and joining in position PVC pipes conforming to IS : 4985 : 1988 and suitable for the respective working pressures with all fittings and specials, e.g. couplings, tees, bends, reducers, bushes, male & female threaded adopters, screwed adaptors, flanged tail pieces, etc., jointing to be done with solvent cement. Make Supreme / Astral. No civil work included in these.

Dia 63 mm 10 kg pressure

Dia 110 mm 6 kg pressure

Supply , installation , testing & commissioning of PVC Ball valves (upto 63 mm dia) and butterfly Valves (PN 1.6) with cast iron body with CF 8 disc, S.S. 410 spindle, supported with flanges, with GI nuts and bolts (75 mm ad above dia). Make : PVC ball vales - Aqvastar; Metallic - Zoloto/ Sant

Dia 32 mm

Dia 63 mm

Supply , installation , testing & commissioning of cast iron wafer type /dual plate type non-return valves (PN 1.6) complete with bolts, nuts and gasket. (Vertical To be installed on each pool pump delivery, Horizontal in the lines). Make : Zoloto / Sant

Dia 50 mm

PLC control panel capable to control all the 50 jets, LED lights (LIGHT AND WATER MOVEMENT SYNCHRONISED) with VFD ( AQVASTAR / DIVINE )

SITC of 1" disc filter ( RAINBIRD )

SITC of Sand media Filter 900 mm dia, top mounted, complete with sand media and installation ( AQVASTAR / PENTAIR )

SITC of Filtration recirculation monoblock pump 2 HP - including installation ( AQVASTAR / ESPA )

Supply and installation of inlet nozzles, through which filtered water is directed into the water body ( AQVASTAR / PENTAIR )

Supply and installation of vacuum nozzle, for cleaning purpose. ( AQVASTAR / PENTAIR )

SITC of Chemical feeder - online feeder including 1 Kg Chlorine tablets. ( AQVASTAR / PENTAIR )

Supply of Maintenance kit set ( Stainless steel vacuum head 24 inches wide, Vacuum hose pipe, 25 mtrs long, Deep net, Leaf rake, Nylon brush, S steel brush, 2 nos Telescopic handle) ( AQVASTAR / PENTAIR )

Supply of Maintenance Trolley ( Stainless steel towable trolley with wheels, mounted with 1 HP self priming pump, 5 mtrs long heavy flexible pvc pipe, 30 mtrs 2 core 2.5 mm2 copper cable, attached electrical board with socket, etc., a cartridge filter with 1.5 inch connection.) ( DIVINE )

SITC of Nozzle line assembly for the parabolic fountain nozzles, made of 304 grade Stainless steel pipe (3 inch dia) with provisions to house the fountain nozzles and for connection to the pumps. (Make DIVINE) including development of drawing / shop drawings

SITC of Adjustable CLEAR Jet Nozzles 20 mm dia made of stainless steel (including universal, where needed), etc. as per approved by Architect. Make Divine including development of drawing / shop drawings

SITC of Submersible Open well Type Pump for the Vertical fountain nozzles of suitable flow rate. (3 pumps with discharge of 2000 LPM @ 12.5 Mtrs head (3 Working), including, all necessary indigenous accessories as required to complete the installation. (Make:- Crompton / Kirloskar) including development of drawing / shop drawings including development of drawing / shop drawings

SITC of Floor mounted up lighters, 12V/24 Wt underwater LED RGB lights (With Niche) in stainless steel body, as per approved by Architect. (Make:- Divine) including development of drawing / shop drawings

Supply and Laying of uPVC pipe 10 kg/sqcm class IV (IS : 4985) including injection moulded fittings with bosses where required e.g. tees, bends, clamps, flanges, couplings and adapters and jointing with adhesive approved by fittings manufacturers. (Make:- Supreme / Prince)

SITC PVC Ball valves (up to 63 mm dia) and butterfly Valves (PN 1.6) with cast iron body with CF 8 disc, S.S. 410 spindle, supported with flanges, with GI nuts and bolts (75 mm ad above dia). (Make : PVC ball vales - Aqvastar ; Metallic - Zoloto/ Sant)

63 mm dia

75 mm dia

110 mm dia Butterfly valve

P and L Electrical cables including conduits, etc. for the lights - 4 core 2.5 mm2 as per IS Code

P and L Electrical cables including conduits, etc. for the pump - 3 core 6 mm2 . Make Havells, Finolex, Polycab

SITC of Power supply for the LED lights 12V / 24 V as per direction of project in charge. Make Divine including development of drawing / shop drawings

SITC of electrical Panel with controls for pumps and lights as per direction of project in charge. Make Divine (IP54/55 water protected) including development of drawing / shop drawings

SITC of Nozzle line assembly for the parabolic fountain nozzles, made of 304 grade Stainless steel pipe (3 inch dia) with provisions to house the fountain nozzles and for connection to the pumps. (Make DIVINE) including development of drawing / shop drawings

SITC of Adjustable CLEAR Jet Nozzles 20 mm dia made of stainless steel(including universal, where needed), etc. as per approved by Architect. Make: Divine , including development of drawing / shop drawings

SITC of Submersible Open well Type Pump for the Vertical fountain nozzles of suitable flow rate. (3 pumps with discharge of 2000 LPM @ 125 Mtrs head (3 Working), including, all necessary indigenous accessories as required to complete the installation. (Make:- Crompton / Kirloskar)

SITC of Floor mounted uplighters, 12V/24 Wt underwater LED RGB lights (With Niche) in stainless steel body, as per approved by EIC (Make:- Divine)

SITC of PVC Ball valves (upto 63 mm dia) and butterfly Valves (PN 1.6) with cast iron body with CF 8 disc, S.S. 410 spindle, supported with flanges, with GI nuts and bolts (75 mm ad above dia). (Make : PVC ball vales - Aqvastar ; Metallic - Zoloto/ Sant)

63 mm dia

75 mm dia

110 mm dia Butterfly valve

SITC of Electrical cables including conduits, etc. for the lights - 4 core 2.5 mm2 as per IS Code

SITC of Electrical cables including conduits, etc. for the pump - 3 core 6 mm2. Make Havells, Finolex, Polycab

SITC of Power supply for the LED lights 12V / 24 V as per direction of project in charge. Make Divine

SITC of Electrical Panel with controls for pumps and lights as per direction of project in charge. Make Divine (IP54/55 water protected) including development of drawings/shop drawing

SITC of Nozzle line assembly for the fountain nozzles, in (50 mm size) uPVC pipes 15 kg/sqcm class V (IS:4985). (Make Supreme / Prince) including development of drawings/shop drawing

SITC of VERTICAL Jet Nozzles 1.5" dia (including universal, where needed), uPVC nipples, etc. as per approved by Architect. Make Divine including development of drawings/shop drawing

SITC of Under water round fountain light, 12 V 18W RGB LED lights in stainless steel body, nozzle mounted as per approved by Architect.. (Make:- Divine) including development of drawings/shop drawing

SITC of Submersible Openwell Type Pump for the Vertical fountain nozzles of suitable flowrate. (2 pumps with discharge of 1620 LPM @ 10.5 Mtrs head (2 Working), including, all necessary indigenous accessories as required to complete the installation. including development of drawings/shop drawing (Make:- Crompton / Kirloskar)

SITC of Floor mounted uplighters, 12V/24 Wt underwater RGB LED lights (With Niche) in stainless steel body, as per approved by Architect. (Make:- Divine) including development of drawings/shop drawing

SITC of PVC Ball valves (upto 63 mm dia) and butterfly Valves (PN 1.6) with cast iron body with CF 8 disc, S.S. 410 spindle, supported with flanges, with GI nuts and bolts (75 mm ad above dia). (Make : PVC ball vales - Aqvastar / Cepex; Metallic - Zoloto/ Sant) 63 mm dia

SITC of Electrical cables including conduits, etc. for the lights - 4 core 2.5 MM2 as per IS Code

SITC of Electrical cables including conduits, etc. for the pump - 3 core 6 MM2. Make Havells, Finolex, Polycab including development of drawings/shop drawing

SITC of Power supply for the LED lights 12V / 24 V as per direction of project in charge. Make Divine including development of drawings/shop drawing

SITC of Electrical Panel with controls for pumps and lights as per direction of project in charge. Make Divine (IP54/55 water protected)

Supply and planting following species best quality container grown healthy trees of 3 mt. min. height, well established & free from disease at site in 1.20 m dia holes, 1.20 m deep dug in the ground,mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.

Livsotonia chinesis

Callistem on lanceolatus ( bottle brush)

Polyalthia longifolia (ashoka)

Millingtonia hortensis

Tabebuia argentia

Albizia lebbeck ( siris )

Azadirachta indica ( neem )

Bam busa vulgaris ( golden bam boo )

Plumeria obtusa

Plumeria rubra

Wodyeta bifurca

Phoenix dactlyfera

Terminallia Metallica

Grevillea Robusta

Bauhinia Variegata

Indian tulip Tree

Tabebuuia rosea

Supply and planting following in poly bags / earthen pots wellbranched, well established & free from disease of 300 mm min. height ground covers at site in 0.3 m dia holes, 0.3 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required.

Thevetia peruviana

Tabernae montana coroneria

Jatrorha integerrim a

Cycus revolvta

Cassia biflora

Jasminum sambac

Bougainvillea

Golden duranta

Grassed mound

Plumbago capensis

Vinca rosea alba

Ficus racemosa

Lantana sellowiana

Ham elia patens

Murrya exotica

Calliadra

Nerium oleander

Vinca rosea

Lantana depressa

Silver yucca

Tecoma gaudi chaudi

Tecoma capensis

Eranthemum nigrum

Ficus benjamina

Ficus blakeana

Ficus panda

Leucophylum whitea

Hymnocallis littoralis

Clerodendron inerme

Buddha belly bamboo

Raphis excelsa

Alteranthera versicolour

Roheo discolour

Ixora stricta red

Preparation of mounds of various size and shape by available excavated/surplus/earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc.lead upto 50 meters and lift upto 1.5 m as per direction of officers in charge.

Supply at site of work well decayed farm yard manure, from any available source, approved by the engineer in charge including screening and stacking.

Supplying and stacking of well decayed cow dung manure at site.

Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard manure or/and good earth to be paid for separately).

Maintenance of Plants ( other than Road side Plantation) -Complete maintenance of plants with watering for 12 months including weeding, hoeing, watering, pruning application of good earth, manure, insecticides, fungicides & fertilizers , security of plants disposal of garden rubbish from the premises to the approved municipal dumping ground replacing casualty of plants occurred due to any reason) by healthy plants.

Digging holes in all kinds of soil and refilling the same with the excavated earth mixed with well decayed farm yard manure (cost of well decayed farm yard manure to be paid separately). Hole 1.2 m dia and 1.2 m deep

Providing and fixing of RCC pre cast tree guard consisting of four panels of size 1800mm (Height) X 600mm (Width) X 35mm (thickness); Size of opening: 100mm X 100mm. All the panels shall be manufactured with monolithic legs of size 50 x 35 mm; the legs of the panels shall be 0.5 m below ground level. All the four Panels shall have a space for display of Name etc. preferably at middle level. RCC panels to be manufactured with M-30 grade of concrete using vibro-compaction process using jointless FRP moulds so as to achieve shuttering finish. RCC panels are to be suitably reinforced to promote long use and to prevent damage during handling, transportation & erection as per drawing & specifications.

Providing and laying as per pond liner made out of non woven multilayer material sandwiched between coatings of thermoplastic elastomer , should be chemical neutral, highly resistant to U.V. degradation , tear & puncture resistant of Dupont or Equivalent complete in all respect as directed by Engineer in Charge .

uPVC pipe 10 kg/sqcm class IV (IS : 4985) including injection moulded fittings with bosses where required e.g. tees, bends, clamps, flanges, couplings and adapters and jointing with adhesive approved by fittings manufacturers. (Make:- Supreme / Prince) 63 mm OD

PVC Ball valves (upto 63 mm dia) and butterfly Valves (PN 1.6) with cast iron body with CF 8 disc, S.S. 410 spindle, supported with flanges, with GI nuts and bolts (75 mm ad above dia). (Make : PVC ball vales - Aqvastar ; Metallic - Zoloto/ Sant) 63 mm dia

Supply, installation, testing and commissioning of IP 66 outdoor IP based 35X optical and 12X digital Pan/Tilt/Zoom Day Night cameras including integrated Housing , Connectors, Lens, Camera Mounts, Power Supply and all Ancillary Equipment & all accessories including Remote Receiver Unit and Pan Tilt Unit (including driver cables) The camera shall be UL Listed

Pole Mounted including cost of 4 M high GI pole

Wall mounted

Supply, Installation, Testing and commissioning of Day Night IP Based 1/3-inch color CCD, 540TVL, 0.1 lux (F1.2), DC iris varifocal 3.5 to 8mm, Internal Sync., DC12V, PAL including integrated outdoor IP 66 rated housing (C/CS mount type), Connectors, A.I.Lens, Camera Mounts, Power Supply and all Ancillary Equipment & all accessories. The camera shall be UL Listed Wall Mounted

Supply, Installation, Testing and commissioning of 1/3" Color Dome cameras Day night, Low lux IP Based with 2.8-10mm varifocal auto Iris lens, 540 TV lines resolution & with Back lit compensation and Automatic gain control

Supply and Installation of 32" Color LCD Flat Screen Monitor

Supply, installation, testing and commissioning of IP digital video management software complete with compatible server grade PC for the software, complete with licenses equal to the number of cameras, client licenses, and all other licenses required to integrate keyboards with PTZ controllers, monitors, etc. The set shall come with RAID backup device sufficient to store all cameras at 4CIF/D1 resolution for minimum 30 Days Backups & Should be enable client to monitor & Control completely from remote location.

Supply and laying of 2c x 1.0 Sq.mm FRLS Shielded wire..

Supply and laying of specified make Cat 6 wire of specified make to be done in prelaid PVC pipe of 25 mm dia / raceway of specified make, but without the cost of raceway or pipe ( the wire is to be drawn from HUB \ Switch of respective area to outlet point ) with the cost of the crimping with material Legrand cat no.032755

Supplying & Erecting conventional type Carbon Dioxide fire extinguishers of ISI approved of 4.5 kgs

WALL / POLE MOUNTED OUTDOOR SPEAKER (ELECTROVOICE / AUSTRALIAN MONITOR / BOSCH/ BOSE )

MIXER AMPLIFIER ( DYNACHORD/ALLE N & HEATH )

Direct Drive Option High-Quality FX processors, 32 editable presets USB interface, file player for MP3 and WAV files 3 Master outputs with 7-band EQ each and delay for Master B PM502 comes in a very modern and user‑friendly design. It combines finest analogue input circuitry and operating surface with the advantages of its digital master and amplifier section, made for a new dimension of flexibility in its class. The input structure, along with the entire feature package and connectivity, positions this mixer at the heart of many installations ranging from Bistros, small clubs, boutiques, hotel bars to churches, mosques and a wide range of similar applications. Further the PM 502 is an extremely versatile tool for a multitude of live applications. It will be the ideal choice for entertainers, DJs and small bands looking

POWER AMPLIFIER ( DYNACHORD/DNB/ EAW/AUSTRALIAN MONITOR )

SOURCE ( SONY/PANASONIC ) BLUE RAY PLAYER WITH USB INPUT

14 AWG ARMORED SPEAKER CABLE OUTDOOR AUDIO CABLE ( REPUTED ) 14 AWG ARMORED SPEAKER CABLE

18 " SCREEN ( DELL/LG/SAMSUNG )

2 KVA UPS ( APC/NEUTRIC/EAT )

2 KVA ONLINE UPS WITH INBUILT BATTERY AND BACKUP OF MORE THAN 5 MINTES

Bidder Name

Amount

R M Constructions

bhorilal mohanlal

M/S Niraniya Construction Co

M/S Niraniya Construction Co

R M Constructions

M/S Niraniya Construction Co

R M Constructions