Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹81.2 L
EMD Value
₹81,300
Closing Date
2 Mar 2025, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
S S SOBARAD
Improvements and Renewal of Gokak Taluka Border- State highway 134 Approach road vaya Hulkund Salahalli Bannur Batakurki Nandihal Road Channapur (New SH) from km 8.89 to 18.74 (Selected reaches) in Ramdurg taluk of Belgavi District(Reserved for Category-II(A) ).
PWD/2024-25/RD/WORK_INDENT18000
PWD/2024-25/RD/WORK_INDENT18000
Reserved
Roads
Two Tender Document System(Two Cover)
PWD Division Office Belagavi
13 documents required · 13 mandatory
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 Achieved in at least One financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs. 81.23 Lakhs
To qualify for award of this contract, each Tenderer in his name should have in the last five years 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 Satisfactorily completed, as prime contractor, at least one similar work such as Any Civil Construction work of value not less than Rs.20.31 Lakhs
To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e., 2019-20, 2020-21, 2021-22, 2022-23 and 2023-24 executed the following minimum quantities of work 1) Earth work/Subgrade 881Cum, 2)GSB 76 cum,3)WMM 83 cum, 4) Asphalting Works(BM/DBM/SDBC/BC) 200 Cum, 5)Pavement Quality concrete(PQC) 110 cum, 6)Concrete Works(PCC/RCC) 51 cum and 7)Steel Reinforcement6.46 Tonne
Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity equal to (AxNx5 - B) A equal to Maximum value of civil engineering works executed in any one year during the last five years (updated to 2024-25 price level) taking into account the completed as well as works in progress. 0.50 Year where B equal to Value at 2024-25 price level, of existing commitments and on-going works to be completed during the next 0.50 Year form the probable date of Award of this contract.
Qualification and experience of the key technical and Management personnel in permanent employment with the Tenderer and those that are proposed to be deployed on this work, if work is awarded
Assessed Tender Capacity shall be more than the Tendered Amount
Each Tenderer should further demonstrate- liquid assets and/or availability of credit facilities of not less than Rs.24.37 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. (Enclosed with this NIT under Forms of Bid qualification information as per Govt. Circular No. FD-CAM/16/2022(P-2), dated. 22.08.2022) (estimated cash flow for 3 months of peak construction period)
As per this note each tenderer should further demonstrate Availability of key equipment/ machinery for execution of the work. However as per Govt Circular no GOFDAE 263EXP122022 dt 11 052022 this clause for owning key equipment for works costing upto Rs 3.00 Crores is exempted. However it is obligatory for the contractor to use the fallowing machineries for various activities involved in construction as per MORTH specifications. 1)Excavator 2)Tipper 3)Hot Mix Plant Minimum 40/60 capacity4 4) Mechanical Paver Finisher 5)Vibratory Roller 6)Vehicle Mounted Mechanical asphalt sprayer 7)self loading concrete mixer/Mechanical concrete mixer with hopper 8)concrete paver finisher/steel channel side formwork and 9) water tanker.
Report on the financial standing of the Tenderer, such as profit and loss statements and auditors report for the last five years.
The EMD of Rs. 81,300.00 shall be paid in full through e payment or in two parts i.e. part (1) Rs, 50,000.00 by e -payment Part (2) Rs. 31,300.00 EMD shall be in the form of Bank Guarantee and shall be scanned and uploaded along with the technical Bid. The original Bank Guarantee should be handed over to the Executive Engineer before the prescribed date and time of opening of the Bids.
Constitutional and Legal Status of the Tenderer
Principal Place of Business (Full address)
Name and Address Telephone Nos. Fax Nos. and email ID of the Tenderers Bankers
The proposed methodology and program of construction, backed with equipment planning and deployment duly supported with broad calculations and quality control procedures proposed to be adopted, justifying their capability of execution and completion of the work as per technical specifications within the stipulated period of completion
Unique Document Identification Number (UDIN) for Practicing Chartered Account is Preffered
Information on works which are yet to be completed.
Information of the works for which Tender acceptance letters are received.
Information of the works for which Tenderer has submitted Tender
Information on litigation in which the Tenderer is involved:
₹2,040
₹81,300
7 Feb 2025
7 Feb 2025
3 Mar 2025
25 Feb 2025
Improvements and Renewal of Gokak Taluka Border- State highway 134 Approach road vaya Hulkund - Salahalli - Bannur - Batakurki - Nandihal Road Channapur (New SH ) from km 8.89 to 18.74 (Selected reaches) in Ramdurg taluk of Belgavi District CC ROAD and Recarpetting
Clearing and Grubbing Road Land .Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earli...
Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead (Vol-3, P.No. 17 / I.No....
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and com...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...
Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...
Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4 percentage by weight of mix, tra...
Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight ...
Providing and constructing un-reinforced plain cement concre te pavement, thickness as per design, over a prepared sub ba se, with 43 grade cement or any other type as per Clause 15 01.2.2 M30 (Grade)...
Road Marking with Hot Applied Thermoplastic Compound Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm i...
Direction and Place Identification Signs with size more than 0.9 m2 size Board.Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2012 made of high intensi...
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2012 made of Class C Type XI retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in double row including fixing collar with cement mortar 1:2 but excluding excavation,...
Laying Cement Concrete Pipe NP3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilli...
Construction of CC DRAIN
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Formwork for wall and cover slab:Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other p...
Providing weep holes in Brick masonry/Plain/ Reinforcedconcrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H toward...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
appeal go.pdf
Others - Appeal GO • 0.93 MB
roads & bridges specifications.zip
Others - road and bridge specifications • 0.37 MB
Govt Circular Agreement Format FD756EXP-12-2024-Dtd-08-10-2024.pdf
Others - Govt Circular Agreement Format FD756EXP-12-2024-Dtd-08-10-2024 • 2.38 MB
Estimate & Drawings.zip
Others - Estimates and Drawings • 1.38 MB
18000 bid doc kw3 (1).doc
Tender Document • 1.81 MB
kmmcr (1).zip
Others - kmccr GO • 0.33 MB
Govt Circular Regarding debarring of contractors under KTPP Act and Rules.pdf
Others - Govt Circular Regarding debarring of contractors under KTPP Act and Rules • 0.10 MB
technical specifications.zip
Others - Technical specifications • 0.30 MB
government notification bc loc letter to be issued by the bank.pdf
Others - government notification bc loc letter to be issued by the bank • 1.73 MB
royalty go.zip
Others - Royalty GO • 0.07 MB
bg_emd.jpg
Others - bg emd • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .