WBPHED/01_05/EE/BOLMD/25-26

Amount

Supply, delivery at site the following submersible pumping machinery as follows :- Submersible Pumping Machinery directly coupled with water proof suitable size motor having following specification. Pump : Duty condition : 28 m3/hr, Head : 60Mtrs. Shaft : Stainless Steel, Impeller : Cr. Steel, Outlet Size : 80 mm/65mm, Motor : Submersible type : 3Ph, 50Hz, 400V + 10%, 2900 RPM Motor must be suitable for operation with DOL starter, energy efficient. (Make: KSB / Pluga / approved make). (TC, GC & Curve Chart to be submitted at the time of delivery)

Supply delivery at site of 4 sqmm 3 core 1.1 KV Grade flat submersible copper conductor cable . (Make:- Finolex / Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

Supply & delivery at site of following size Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Gloster / Polycab / Mescab / or any Approved Vendor list of PHED.)

10 mm² x 3 core

Supply and delivery of the following valves, pipes and gauges etc at site-- (Make: Approved Vendor list of PHED.)

3mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

80mm dia. CI Top & Bottom adopter.

Heavy type suitable dia. MS suspension clamp along with nuts bolts and washers.

80mm dia. CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for wash out line. (MOC & TC needed for valve).

80mm dia. CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312) (MOC & TC needed for valve).

CIDF 90°bend- 1no., CI flanged tee- 1no., blank flange-1no., CI/ MS flanged short piece 0.50 mtr.-1no, CI/ MS flanged pipe 1mtr.- 1 no. etc (as per IS specification and certification registered) for construction of delivery pipe line and wash out line.

Heavy type 250mm dia./suitable Split type tube well cover with clamping arrangement including supply of nuts, bolts and washer as per departmental design.

Anti snapping safety device for pump set by supplying suitable size of MS angle busket and nylon rope of required length including supplying of nuts, bolts and all other materials.

Suitable Kiosk box for cable connection of submersible pump motor set with degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC.

Making brick pillar 0.25 x 0.25 x 0.75 Mtr/Suitable hight for supporting of valves and pipes with 12mm thick plaster and net cement finish complete. (Both Pipe line)

Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5')

Laying of one No. cable up to 35 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Installation of starter along with main switch, changeover, busbar chamber, cut out etc. all electrical equipment within the pump house, drawing of cable properly on suitable size GI cable tray on wall / as per direction of EIC as per layout & IE rules and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fixing of materials for taking power within the pump house from WBSEDCL end as per direction of EIC.

Installation of Submersible pumping machinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of MS clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC. [N.B: (1) Pump data is to be confirmed with the yeild test report of the tube well. (2) Third party inspection of the work is mandatory as per guidelines of NJJM and direction of EIC without any extra cost. (3) Drawing, design and make of the materials are to be approved from the EIC before procurement.]

Add: GST @ 18% on sum of Item No: 1 to 10

Add: Cess @1% on sum of Item No. 11

S.K. ELECTRICALS (BID ID -6439313)

SUNIL RABIDAS (BID ID -6439374)