CA NO. GE(P)AF/GUR-35/2022-23 REPAIR OF WOODEN AND STEEL FURNITURE INCLUDING PAINTING POLISHING TO WOODEN FURNITURE AND PAINTING TO STEEL FURNITURE AT OFFICERS MD ACCN SEKHON VIHAR AND OMQ BLOCK AT AF STN PALAM UNDER GE(P) AF GURGAON

Amount

Removal of following existing unserviceable steel/UNSV components of various furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, providing hinges, denting, applying steel putty for leveled surface, placing every part in-tact and painting the disturbed portion of Almirah Steel Med Complete all as specified and as applicable as drawings,FD-1032. NOTE : Work will be executed where the furniture exist in Sekhon vihar Offrs Md Accn including BSO's Furniture Yard at AF Stn Palam as directed by Engineer-in-Charge:-

Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah Med steel complete all as specified and directed.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah Med steel. (Drg No FD-1032) complete all as specified and directed.

Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H medium (Drg No FD-1032) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.

All as per item No 1.02 above but locks (6 levers ) of make link or standard aproved by GE.

All as per item No 1.02 above but CP handle with bolt.

All as per item No 1.02 above but mild steel locking rod.

All as per item No 1.02 above but locking box / device

Scratching of scracheds/dentings to powder coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside side only with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting duty matched with existing surfaces

All as per item No 1.00 here-in -before but ALMIRAH LARGE STEEL FD/E6/MAP/18:-

Removing of unserviceable and worn out legs and providing new legs made out of 20 gauge MS sheet fabricated to shape as per existing almirah steel with shelves/Half S & Half H Large complete all as specified and directed.

Removing of unserviceable shelves and providing new shelves made out of MS sheet 1.00mm thick with fixing brackets of existing type almirah large steel complete all as specified and directed.

Material and labour for removing unserviceable shutter and providing new shutter using MS sheet 1.00mm thick as per existing shape Almirah large steel. (Drg No FD-1031) complete all as specified and directed.

Taking down existing unserviceable MS clips with screw/nuts and bolts of almirah steel with shelves/Half S & Half H Large (Drg No FD-1031) refixing/weldling with new items, MS clips with screws/nuts & bolts complete all as specified and directed.

All as per item No 2.02 above but locks (6 levers ) of make link or standard aproved by GE.

All as per item No 2.02 above but CP handle with bolt.

All as per item No 2.02 above but mild steel locking rod.

All as per item No 2.02 above but locking box / device

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside/out side with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair inside side only with painting duty matched with existing surfaces

Scratching of scracheds/dentings to powde coated steel surface with emery paper, applying metel putty wherever required and repair out side only with painting duty matched with existing surfaces

All as per item No 1.00 here-in -before but CHARPOY IP WITH HARD TOP ,FD/MAP-II/01

12mm commercial MR Grade ply placed in position as shown in drg.

Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

All as per item No 1.00 here-in -before but TABLE BEDSIDE STEEL ,FD/E6/MAP/15(R)

18/19mm thick prelaminated particle board for sides, top and front of table bed side of size 450mmx500mm placed in position with 4mm thick teak wood edging alround the edges of the top as shown in drg with screws.

Legs to table bed side steel made of 18mm MS square pipe placed in position as shown in drg.

CP steel 100mm long handle to the drawers of the table bed side steel placed in position as shown in drg.

Supply and fix new drawer front for table bed side made of prelaminated MDF 18 mm All as per Drg.

Replacement of worn out conduct MS 25 mm Sq pipe 16 gauge whrerever required as directed and fixing as shown on drg . (welding points shall be measured and paid separately.

Mig welding of broken joints MS members (tabular) .

Supply and fix plywood back 6 mm BWR grade for table bed side All as per Drg.

Painting with one coat of black synthetic enamel paint to complete table etc. all as specified and directed.

Supply and fix suitable PVC shoes of superior quality .

All as per item No 1.00 here-in -before but CHAIR COMPUTER, FD/E6/MAP/01

Removing unserviceable damaged Seat & back of Chair computer, supply and fixing of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic Mtr on Hampden machine ,all as directed and specified by Engr -in -charge

Removing old unserviceable arm rest of chair computer and S&F new one made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in –charge.

Removing unserviceable castor twin wheels and S&F new castor twin wheel suitable for chair computer all as directed

Removing unserviceable adjustable Hydrolic system and S&F new adjustable Hydrolic system suitable for chair computer all as specified and directed by Engr -in charge.

All as per item No 1.00 here-in -before but TABLE COMPUTER, FD/E6/MAP/03

Top of table

Key board tray of table with telescopic chanel

Drawer of table with telescopic chanel

Shelves of table

vertical side shelf

All as per item No 1.00 here-in -before but BED HARD STEEL (FD/E6/MAP/08(R )

12mm commercial ply MR Grade placed in position as shown in drg. Make of ply-Green ply/Kit ply/archid ply

Rubber shoes 32mmx32mm of high quality placed in position as shown in drg.

Scratching of scraches/ dentings to powder coated steel surfaces with emery paper ,applying metal putty wherever required and repair with painting duly matched with existing surfaces.

Head Rest as per drg

Foot Rest as per Drg

All as per item No 1.00 here-in -before but TEAPOY VERANDAH,FD/E6/MAP/17

Material and labour for removing of unserviceable table top, making to size fixing new top of required size 18-19 mm MDF board exterior grade in colour/shade as approved by GE. (Make Novapan, Ecoboard, Green panelmax).

25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

Material and labour for replacement of worn out 10mm dia MS bar wherever required as directed and fixing as shown on drg. (Note :- Welding points shall be measured and paid separetly).

MIG welding of broken joints MS members For table .

Rubber shoes 18mm square of high quality placed in position as shown in drg.

Material and labour for carrying out minor repairs like denting & gas welding of broken Frame etc and painting with one coats of the White colour synthetic enamel paint to complete table etc complete all as specified and directed.

All as per item No 1.00 here-in -before but CHARPOY FOLDING IP WITH HARD TOP ,FD-388®

Taking out existing unserviceable/broken plywood from the charpoy folding IP by unscrewing nut,bolt, washer and flat iron. Supply and fixing new 8/9mm thick plywood commercial ISI marked of size 1980mmX900mm fixed over the pipe with new GI carriage bolt, not and washer complete all as specified and directed by Engr-In-Charge.

Rubber shoes 25mm dia of high quality placed in position as shown in drg.

One coat of synthetic black paint on all steel portion of charpoy folding IP with hard top complete all as specified and directed by Engr-In-Charge.

All as per item No 1.00 here-in -before but CHAIR WRITING,FD/E6/MAP/12

Removing unserviceable damaged Seat & back of Chair writing. Supply and fixing the seat made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Painting the entire frame with one coat of synthetic enamel paint 1st quality including preparation of surface of chair writing officers all as directed by Engr -in -charge.

Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Removing of old unsv tapestry cloth and supply and fixs new cloth as apporoved and directed by in Engr charge.

Removing old broken rubber stopper of the chairs and S&F new Rubber stopper at bottom all as directed and specified by Engr -in -charge

All as per item No 1.00 here-in -before but CHAIR VERANDAH:-, FD-,256,359,259

Spot gas welding to broken parts/joints of chairs.

Removing the existing unserviceable cane plastic from the chair and Recanning the chair with plastic cane 3.5mm to 4mm wide, white colour, (MAT Pattern),quality as approved by GE/Engr-in-Charge.

Removing the existing unserviceable cane plastic / newar from the chair verandah and supply and fixing PVC seat 4mm thick in lieu of cane after providing two additional stiffener at centre of seat & back with 25x5 mm flat Iron welded with centre of the frame duly white painted for support of PVC seat. .Due care shall be taken while fixing the PVC seat, The PVC seat shall get approved from BSO and GE before supply.

Best quality new PVC shoes to the legs of chair.

Painting the frame of the chairs by two coats of synthetic enamel white of approved quality.

Removal of following existing unserviceable old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion of Chair Dining as applicable as per drg No.FD/MAP-II/10. Work will be executed where the furniture exist in Sekhon vihar Offrs Md Accn including BSO's Furniture Yard at AF Stn Palam as directed by Engineer-in-Charge:-

Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 12.01 above but rear Leg

All as per item No 12.01 above but back rest

All as per item No 12.01 above but leg stiffener .

All as per item No 12.01 above but front Rail

All as per item No 12.01 above but rear Rail

All as per item No 12.01 above but side Rail

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

seat made of 12mm thick BWR plywood over which 40 density cool foam 75mm thick shall be provided duly covered with best quality tepestry cloth as approved bt BSO/GE.

All same as per item No. 12.01 above but wooden cleat.

All asper Item No 25.00 here -in- before but TABLE CENTRE ,FD-274:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.

Long rail : All same as per item No 13.02 above but long rail for table centre.

Shor rail : All same as per item No 13.02 above but short rail for table centre.

Stiffener : All same as per item No 13.02 above but short rail for table centre.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but TABLE DINING FOR 6 PERSONS:-FD/MAP-II/03:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts.

Long rail : All same as per item No 14.02 above but long rail for table dining 6 per.

Shor rail : All same as per item No 14.02 above but short rail for table dining 6 per.

L-shape corner of flat iron 4" x 4" to the Table between legs and rail to be fixed with screw.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but TABLE WRITING:-FD-275:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Supply and fixing of sides and bottom of cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg .

Supply and fixing of shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.

Supply and fix leg in repair made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 15.04 above but long rail .

All as per item No 15.04 above but Long stiffener.

All as per item No 15.04 above but Short rail

All as per item No 15.04 above but bottom rail of table writing.

Supply and fixing of back of cup board : It shall be made out of 6mm thick plywood BWR grade confirming to IS as approved to be fixed as shown on drg .

Supply and fixing of partition of the cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and as approved and all as directed by Engr-in-charge.

All as per item No 15.07 but Drawer of table writing

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but TABLE DRESSING GENTS FD/E6/MAP/16:-

Top : Top shall be made of both side melamine faced pre-laminated MDF board 12mm thick confirming to IS in Baverian beach shade Make-Greenlam/WINTUFF/TESA in one piece after removing the old one. Edging alround made of teak wood beading 4mm thick duly polished shall be provided all around .

All same as per item No 16.01 above but side of table dressing gents.

All same as per item No 16.01 above but bottom of table dressing gents .

Mirror : S & F mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots duly french polished. Mirror shall be of electro copper plated polished sheet glass 6 mm thick Make- Saint Gobain/Modiguard. Suitable rawl plug heavy duty as per drg 2 Nos shall be provided to the back of the mirror for hanging. Back of the frame shall be of plywood commercial 6mm thick BWR grade confirming to IS as approved and as shown on drg.

Back : Back shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade Make-Greenlam/WINTUFF/TESA in one piece after removing the old one. suitable rawl plug as per drg 2 Nos shall provided to the back for hanging .

Material and labour for Scrapping of old polish and dirt from the surfaces of Table Dressing gents by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but TABLE DRESSING LADIES FD/MAP-II/07:-

Back : All same as per item No 16.06 above but back of table dressing ladies.

Side : All same as per item No 16.01 above but suitable for Table dressing ladies with mirror as per the drg.

Bottom : All same as per item No 16.01 above but back of table dressing ladies.

Drawer with Handle and telescopic channel : All same as per item No 16.04 above but suitable for Table dressing ladies with mirror as per the drg.

Top : All same as per item No 16.01 above but suitable for Table dressing ladies with mirror as per the drg.

Supply and fix of mirror : All same as per item No 16.06 above but suitable for Table dressing ladies with mirror as per the drg.

Taking out old pressed /torn old cushions from stool and Supply 75mm foam cushion and 40 densitythick foam cushion of suitable for stool dressing duly covered with good quality tapestry all over(Not less than Rs 200 per metre)cloth of approved color and shade by GE.

Long Stiffener : It shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable no of screw wood steel .

Short Stiffener : All same as per item no. 17.08 above but short stiffener of table dressing ladies.

Leg : All same as per item no. 17.08 above but leg of table dressing ladies.

CP steel 100mm long handle to the drawers & shutter of table dressing ladies placed in position as shown in drg.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but SOFA SET 5 SEATER,(2 Single seater and One 3seater,10Nos cushion in each set) FD/MAP-II/02

wooden batten

Teak wood bearer

Taking out old pressed /torn old cushions and Supply 40 density thick foam cushion of size 21”x22”x4” duly covered with good quality tapestry all over(Not less than Rs 250 per metre)cloth of approved color and shade by GE.

Taking out old torn/ faded cushion cover from foam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best quality tapestry cloth ( Not less than Rs.200 per meter) as approved by GE complete , Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.

Scratching the entire wooden pallets of sofa 5 seater , filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface.

All asper Item No 12.00 here -in- before but SIDE BOARD :FD-1112:-

Removing of unserviceable top, making to size fixing new top of required size made of 18-19mm thick prelaminated MDF board in colour/shade as approved by GE. 2 mm thick PVC edging shall be fixed on sides with string bonded as directed.

All as specified above item No 19.01 above but for bottom of side board

All same as per item No 19.01 done but sides for side board.

Supply and fix of back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece.

Supply and fixing of shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher.

Drawer with handle : Drawer shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and provided with recessed handle of best quality as approved. Bottom of drawer shall be made of one side melamine faced pre-laminated MDF board 6mm thick .

Leg shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable groving with long/short frame .

All same as per item No 19.07 above but long stiffener .

All same as per item No 19.07 above but Short stiffener .

CP steel 100mm long handle to the drawers & shutter of Bin Linen multi purpose placed in position as shown in drg.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but TABLE PEG ,FD-384:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts.

All same as per item No 20.02 above but long rail for Peg table.

All same as per item No 20.02 above but short rail for Peg table.

All same as per item No 20.02 above but stiffener for Peg Table.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All as per Item No 12.00 here -in- before but TV TROLLEY , FD/E6/MAP/04 (R):-

Top of trolley made out of 18/19mm thick prelaminated particle board exterior grade, nature teak color, edges duty covered with 4mm thick edging of teak wood all as specified.

Sides

Baes/Shelves

5.5mm thick plain glass with magnetic catchers.

50mm dia swivel type castors wheel.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but HAT STAND WITH MIRROR,FD-233:-

Supply and fix of beading : Beading made out of well seasoned teak wood size 35x6mm all around shall be provided to the frame of hat stand as shown on drg .

Supply and fix of plywood : Plywood 4mm thick commercial Make- Green ply confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the back side of hat stand all as shown on drg and as directed by Engr-in-charge .

Supply and fix of plywood : Plywood one side teak face 4mm thick commercial confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand all as shown on drg .

Supply and fixing of peg : Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long as shown on drg .

Supply and fix of looking Mirror : Looking Mirror size 440x300x6mm of approved quality make-Modi guard/Saint Gobain/Swastic duly fixed with beading size 35x6mm made out of well seasoned teak wood duly finished as shown on drg .

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All asper Item No 12.00 here -in- before but TEAPOY WOODEN,FD- 382:-

Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed.

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts.

All same as per item No 23.02 above but long rail for teapoy.

All same as per item No 23.02 above but short rail for teapoy.

: All same as per item No 23.02 above but stiffener for teapoy.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All as per Item No 12.00 here -in- before but BIN LINEN PURPOSE WITH IRONING BOARD FDNo,FD/E6/MAP/09:-

Top of table made out of 12mm thick teak ply, nature teak color, edges duty covered with 4mm thick edging of teak wood all as specified.

Plywood Commercial 12 mm thick Back ply

Prelaminated partical board 18mm thick to the Door shutter with magnetic catcher

Prelaminated particle board 18mm thick to the drawer.

CP steel 100mm long handle to the drawers & shutter of Bin Linen multi purpose placed in position as shown in drg.

Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means of using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

All as per item No 1.00 here-in -before but Shoe Rack Steel FD/E6/MAP/02R :-

Continuous Gas welding as required .

Hard rubber shoes as per drg

Painting to steel shoe rack with synthetic enamel paint of existing colour after prepration of surfaces.

Note:- (a) The amount of Rs 44907.50 against Schedule of Credit on Page No 124 to 125 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. (b) Item Nos 1 to 25 are pertaining to to Officers Md Accn at Sekhon Vihar under I/C BS for Sekhon Vihar at AF Stn Palam. (c) One Skilled carpenter shall be made available on all working days for entire contract period for day to day urgent complaint of Offrs md accn Sekhon Vihar, the cost of the same shall be inclusive in the quoted rates of above items and he shall report to Eng-in-Charge at 9.00 AM. In case of non compliance of urgent minor nature complaints within 24 hours the penality of Rs 100/- per complant per day shall be charged from contractor.

M/s Makhan Lal