Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC JAGDISH MARG PATIALA PB PIN 147 001 | PATIALA | PATIALA | PUNJAB | 147001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹20.2 L+₹71,516 (3.67%)Rejected-AOC 852 EKTA VIHAR 1 C NEAR ANAND NAGAR 9 B PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | L2 | Rejected-AOC Being other than lowest bidder |
| Sl No | Description | Qty | Unit | Arneja Builders L2 | Jiwan Singh AND Associates L1 |
|---|---|---|---|---|---|
| 1.00'Notes: (i) Please refer Schedule 'A' Notes of tender documents. | |||||
| 2.00TABLE DINNING FOR 6&8 PERS (FD-273/ FD-279) M&L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after removing the old unsv parts complete all as specified and directed. | |||||
| 2.01 | Top using 18mm thick prelaminated particle board ISI marked and providing 6mm thick Teak beading all around complete all as specified and directed. | 40 | Each | 800 ₹32,000 | 513 ₹20,520 Lowest |
| 2.02 | Leg using Teak wood (MP Teak) complete all as specified and directed. | 30 | Each | 100 ₹3,000 | 23 ₹690 Lowest |
| 2.03 | Long rails using Teak wood (MP Teak) complete all as specified and directed. | 10 | Each | 150 ₹1,500 | 23 ₹230 Lowest |
| 2.04 | Short rails using Teak wood (MP Teak) complete all as specified and directed. | 10 | Each | 70 ₹700 | 23 ₹230 Lowest |
| 2.05 | Stiffeners using Teak wood (MP Teak) complete all as specified and directed. | 30 | Each | 50 ₹1,500 | 23 ₹690 Lowest |
| 2.06 | Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed. | 40 | Each | 200 ₹8,000 | 23 ₹920 Lowest |
| 3.00MIRROR WITH SHELF (FD-52M) | |||||
| 3.01 | S&F shelf using 18mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around complete all as specified and directed. | 30 | Each | 200 ₹6,000 | 53 ₹1,590 Lowest |
Tender Value
Refer Docs
EMD Value
₹56,000
Closing Date
15 Aug 2025, 6:00 pmClosed
Garrison Engineer (South) Patiala
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH SANGRUR ROAD PATIALA CANTT
As per tender documents
2025_MES_721342_1
GE(S)/PAT/T-40/2025-26
Open Tender
Civil Works
Item Rate
240 days
Nabha and Sangrur
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (South) Patiala
₹56,000
Yes
23 Sept 2025
18 Jul 2025
18 Aug 2025
18 Jul 2025
15 Aug 2025
1 Aug 2025
18 Jul 2025 - 25 Jul 2025
Amount
'Notes: (i) Please refer Schedule 'A' Notes of tender documents.
TABLE DINNING FOR 6&8 PERS (FD-273/ FD-279) M&L for carrying out repair/replacement of following parts of Table dining for 6 pers as per drawing after removing the old unsv parts complete all as specified and directed.
Top using 18mm thick prelaminated particle board ISI marked and providing 6mm thick Teak beading all around complete all as specified and directed.
Leg using Teak wood (MP Teak) complete all as specified and directed.
Long rails using Teak wood (MP Teak) complete all as specified and directed.
Short rails using Teak wood (MP Teak) complete all as specified and directed.
Stiffeners using Teak wood (MP Teak) complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
MIRROR WITH SHELF (FD-52M)
S&F shelf using 18mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around complete all as specified and directed.
Supply and fix mirror of 5.5mm thick electro copper plated of polished plate with frame of Teak wood, back ply and hanging arrangement complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
PEG TABLE (FD-384) M&L for carrying out repair/replacement of following parts of Peg Table as per drawing after removing the old parts complete all as specified and directed.
Top using 18mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around complete all as specified and directed.
Legs using Teak wood(MP Teak) complete all as specified and directed.
Long rails using Teak wood(MP Teak) complete all as specified and directed.
Short rails using Teak wood(MP Teak) complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
TABLE BED SIDE (FD/E6/MAP/15 'R') M&L for carrying out repair/replacement of following parts of Table bed side as per drawing after removing the old unserviceable parts complete all as specified and directed.
Top using 18mm thick prelaminated particle board to table bed side ISI marked and 6mm thick edging shall be provide all around the top all as shown on drg complete all as specified and directed.
Both Side using 18 mm thick prelaminated particle board ISI marked and 6mm thick Teak edging all around complete all as specified and directed.
Side of drawers using 12 mm thick comercial plywood ISI marked complete all as specified and directed.
Bottom of drawers using 6mm thick commercial plywood complete all as specified and directed.
Back of table using 6 mm thick plywood commercial complete all as specified and directed.
S&F aluminum handle to drawers complete all as specified and directed.
S&F Hard rubber/PVC shoes to each legs complete all as specified and directed.
S&F steel channel to each drawer for Movement of pull out tray complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
TABLE CENTRE/TABLE CENTRE TWO TIER (FD-274) M&L for carrying out repair/replacement of following parts to table as per drawing after removing the old unservicable parts complete all as specified & directed and shown on drg.
Top using 18mm thick prelaminated particle board exterior grade ISI marked and 4mm thick teak wood beading all around complete all as specified and directed.
Legs using Teak wood (MP Teak) complete all as specified and directed.
Long rails using Teak wood (MP Teak) complete all as specified and directed.
Short rails using Teak wood (MP Teak) complete all as specified and directed.
Stiffners using Teak wood (MP Teak) complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
CHAIR WRITING (FD-280 & FD-1107) M&L for carrying out repair/replacement of following parts to chair writing, as per drawing after removing the old unservicable parts complete all as specified and shown on drgs.
Legs using Teak wood (MP Teak) complete all as specified and directed.
Rails using Teak wood (MP Teak) complete all as specified and directed.
Arms using Teak wood (MP Teak) complete all as specified and directed.
Stiffners using Teak wood (MP Teak) complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
CHAIR DINNING ( FD-279 & FD/MAP-II/5) M&L for carrying out repair/replacementof following parts to chair dining, as per drawing after removing the old unservicable parts complete all as specified & directed and shown on drgs.
Legs using Teak wood (MP Teak) complete all as specified and directed.
Rails using Teak wood (MP Teak) complete all as specified and directed.
Stiffners using Teak wood (MP Teak) complete all as specified and directed.
Supply and Fixing of PVC seat to chair dining (FD/MAP-II/05) complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
CHAIR EASY (FD-229 & 1108) M&L for carrying out repair/replacement of following parts to chair easy as per drawing after removing the old unservicable parts complete all as specified and shown on drgs
Legs using Teak wood (MP Teak) complete all as specified and directed.
Rails using Teak wood (MP Teak) complete all as specified and directed.
Arms using Teak wood (MP Teak) complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
M&L for removing old broken cane and recanning with plastic cane (oval shape) 4 mm wide and border with 3mm wide cane complete as per Godrej pattern using reputed brand of cane to the following furniture articals complete all as specified and directed.:-
Chair writing (Drg No FD-280 & FD-1107) complete all as specified and directed.
Chair dinning (Drg No FD-279) complete all as specified and directed.
Chair Easy (Drg No FD-229 & FD-1108) complete all as specified and directed.
SOFA SET THREE SEATER/SINGLE SEATER WITH DETACHABLE CUSHION (FD-373 / FD-1113) M&L for carrying out repair/replacement of following parts to sofa set, as per drawing after removing the old unservicable parts complete all as specified & directed and shown on drgs.
Long rails of seat for three seater sofa of size 1590mmx100mmx35mm of using Teak wood (MP Teak) complete all as specified and directed.
Side rail of size 575mm x 100mm x 35mm of using Teak wood (MP Teak) complete all as specified and directed.
Long rails of seat for three seater sofa of size 1590mmx70mmx35mm of using Teak wood (MP Teak) complete all as specified and directed.
Long rails of single seater of size 575mmx70mmx35mm of using Teak wood (MP Teak) complete all as specified and directed.
Arms using Teak wood (MP Teak) complete all as specified and directed.
Leg using Teak wood (MP Teak) complete all as specified and directed.
Sofa foam cushion 40 density, 100mm thick of standard size covered with tapestry cloth not less than Rs. 180/- per meter as approved by GE. complete all as specified and directed.
Applying two coats of French polish (ready made) after necessary preparation of surfaces to sofa three seater complete all as specified and directed.
Applying two coats of French polish (ready made) after necessary preparation of surfaces to sofa single seater complete all as specified and directed.
TABLE WRITING (FD-275 & FD-240) M&L for carrying out repair/replacement of following parts of Table writing as per drawing after removing the old unsv parts complete all as specified & directed and shown on drg.
Top of table using of 18mm thick prelaminated particle board ISI marked, including 6mm thick Teak beading all around complete all as specified and directed.
Legs using Teak wood (MP Teak) complete all as specified and directed.
Rails using Teak wood (MP Teak) complete all as specified and directed.
Front of drawer and shutter of cabinet using 18mm thick prelaminated particle board (one side teak finish) complete all as specified and directed.
Shutter of cabinet using of 18mm prelaminated particle board(one side teak finish and other side white balancing laminated) complete all as specified and directed.
Sides, bottom and shelf of cabinet using 12mm thick particle board complete all as specified and directed.
Bottom of drawer and side of cabinet using 6 mm thick commercial plywood complete all as specified and directed.
Supply and fixing knobs to drawers complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
TABLE OFFICE OFFICER (FD-1003) M&L for carrying out repair/replacement of following parts of Table office officer as per drawing after removing the old unsv parts complete all as specified & directed and shown on drg.
Top of table using of 18mm thick prelaminated particle board ISI marked, including 6mm thick Teak beading all around complete all as specified and directed.
Side, back and bottom of Cabinet using 25mm thick second class hard wood planks complete all as specified and directed.
Side, front and back of drawer using second class hard wood planks complete all as specified and directed.
Bottom of drawer using 6mm thick commercial plywood complete all as specified and directed.
Shutter of cabinet using 25 mm thick hard wood planks with s/s hinges complete all as specified and directed.
Stiffners using teak wood complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
TABLE OFFICE CLERK (FD-1004) M&L for carrying out repair/replacement of following parts of Table office clerk as per drawing after removing the old unsv parts complete all as specified & directed and shown on drg.
Top of table using of 18mm thick prelaminated particle board ISI marked, including 6mm thick Teak beading all around complete all as specified and directed.
Side, front and back of drawer using second class hard wood planks complete all as specified and directed.
Bottom of drawer using 6mm thick commercial plywood complete all as specified and directed.
Leg using Teak wood (MP Teak) complete all as specified and directed.
Rails using Teak wood (MP Teak) complete all as specified and directed.
Stiffners using teak wood complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
TABLE DRESSING GENTS WITH MIRROR (FD-230) M&L for carrying out repair/replacement of following parts of Table Dressing Gents as per drawing after removing the old unsv parts complete all as specified & directed and shown on drgs.
Top of table using of 12mm thick wood plank with laminated sheet 1.5mm thick for one side complete all as specified and directed.
Bottom and back of table using of 12mm thick wood plank complete all as specified and directed.
Both side of table and front of drawer using 12mm thick teak wood plank with laminated sheet 1.5mm thick for one side , bottom of drawer using 6mm thick commercial plywood, side of drawer using 12mm thick teak wood plank complete all as specified and directed.
Supply and fixing Chromium plated knobs for drawers complete all as specified and directed.
Suply and fixing mirror 5.5mm thick electro copper plated of polished plate with frame of Teak wood and back ply all as shown on Drg complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
SIDE BOARD (FD-241) M&L for carrying out repair/replacement following parts to side board as per drawing after removing the old unservicable parts complete all as specified & directed and shown on drgs.
Top using 18mm thick prelaminated particle board exterior grade, ISI marked including 4mm thick teak wood beading all around complete all as specified and directed.
Legs using teak wood (MP Teak) complete all as specified and directed.
Bottom and shelves of side board using 18mm thick prelaminated particle board exterior grade, ISI marked including 4mm thick teak wood beading all around complete all as specified and directed.
Back using of 6mm thick commercial ply wood complete all as specified and directed.
Side using 18mm thick prelaminated particle board ISI marked complete all as specified and directed.
Front of drawers using 18mm thick prelaminated particle board, side and back of drawer using 12mm thick commercial plywood and bottom of drawer using 6mm thick commercial plywood complete all as specified and directed.
Shutter of Cabinet using of 18mm thick prelaminated particle board fixed with continous piano type hinges complete all as specified and directed.
Supply and fixing knobs for drawers and door shutter complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
TABLE DRESSING LADIES WITH MIRROR (FD-251) M&L for carrying out repair/replacement following parts to table dressing ladies, as per drawing after removing the old unsv parts complete all as specified & directed and shown on drgs.
Suply and fixing mirror 5.5mm thick electro copper plated of polished plate with frame of Teak wood and back ply all as shown on Drg complete all as specified and directed.
Top of table using of 18/19mm thick particle board decorated with phenol formal dehide with laminated sheet 1.5mm thick for one side, including 6 mm thick teak wood beading all around complete all as specified and directed.
Bottom portion and side using 18mm thick Teak veneered face on one side and another side commercial particle board decorated with phenol formal dehide including 4mm thick teakwood beading complete all as specified and directed.
Side of table and front of drawer using 12mm thick teak wood plank with laminated 1.5 mm thick in one side complete all as specified and directed.
Side and back of drawer using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood complete all as specified and directed.
Supply and fixing knobs for drawers complete all as specified and directed.
Leg using Teak wood (MP Teak) complete all as specified and directed.
Supply and fixing plane sliding glass 5mm thick and aluminum channel having two 'U' shaped complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
CHAIR DINNING WITH CUSHION (FD/E6/MAP/10'R') M&L for carrying out repair/replacement of following parts of Chair Dinning as per drawing after removing the old unservicable parts complete all as specified & directed and shown on drg.
Legs using Teak wood (MP Teak) complete all as specified and directed.
Rails using Teak wood (MP Teak) complete all as specified and directed.
Stiffners using Teak wood (MP Teak) complete all as specified and directed.
Seat using 12mm thick BWR phenol bonded plywood over with 75mm thick 40 density foam cover with quality fabric cloth (cost of cloth not less than Rs. 150/- per meter) as approved by GE complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfacescomplete all as specified and directed.
BIN SOLID MULTI PURPOSE (FD/E6/MAP/09) M&L for carrying out repair/replacement following parts to bin solid as per drawing after removing the old unservicable parts complete all as specified & directed and shown on drgs.
Top using 18mm thick prelaminated particle board, ISI marked and 4mm thick teak wood beading all around complete all as specified and directed.
Legs using teak wood (MP Teak) complete all as specified and directed.
Back using 18mm thick prelaminated particle board complete all as specified and directed.
Side, shelves and drawer using 18mm thick prelaminated particle board ISI marked complete all as specified and directed.
Stiffners using teak wood(MP Teak) complete all as specified and directed.
Shutters of cabinet using of 18mm thick prelaminated particle board fixed with continous piano type hinges complete all as specified and directed.
Supply and fix CP MS handle complete all as specified and directed.
Applying two coat of french polish (ready made) to article after necessary preparation of surfaces complete all as specified and directed.
ALMIRAH MEDIUM/ SMALL STEEL (FD - 1034/ 1032)
Repair to the almirahs such as removing dents from shutters,back, top, bottom and sides of almirah, repair and fixing of existing legs by welding, repair and refixing of existing shelves and making it servicable and applying a coat of pink primer where ever required all as directed and specified.
Supply and fix in replacement 3 way lock, 4 levers with duplicate Key and other standard makes as approved by GE complete all as specified and directed.
Supply and fix in replacement CP MS handles as pre existing pattern and design to any type of almirah complete all as specified and directed.
Repair/replacement of legs by welding to almirah med steel shall be made out of 1 mm thick plane black sheet complete all as specified and directed.
One coat spray painting to almirah medium steel inner and outer surface with synthatic enamel paint olive green including preparation of surface after cleaning dirt/dust with emery paper complete all as specified and directed.
ALMIRAH LARGE STEEL (FD-1033/ 1031, FD/E6/MAP/18)
Repair to the almirahs such as shutters,back top, bottom and sides of almirah, repair and fixing of existing legs by gas welding,repair and refixing of existing shelves and making it servicable and applying a coat of pink primer where ever required all as directed and specified.
Supply and fix in replacement 3 way lock, 4 levers with duplicate Key and other standard makes as approved by GE complete all as specified and directed.
Supply and fix in replacement CP MS handles as pre existing pattern and design to any type of almirah complete all as directed and specified.
One coat spray painting to almirah large steel inner and outer surface with synthatic enamel paint OG/ as per specified colour in drg, including preparation of surface after cleaning dirt/dust with emery paper complete all as specified and directed.
LOCKER STEEL (FD-1029)
Repair to the lockers such as removing dents from shutters, back, top, bottom and sides, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of pink primer where ever required all as directed and specified.
Supply and fix in replacement of chromium plated handle as per existing pattern complete all as specified and directed.
Supply and fix in replacement chromium plated Haps and staple as per existing pattern complete all as specified and directed.
Supply and fix in replacement steel rod complete all as specified and directed.
Repair/replacement of legs by welding to locker steel shall be made out of 1 mm thick plane black sheet complete all as specified and directed.
One coat spray painting to locker steel inner and outer surface with synthetic enamel paint OG, including preparation of surface after cleaning dirt/dust with emery paper complete all as specified and directed & as per drg.
CHAIR VERANDAH (FD-256, FD/MAP-II/06)
Welding broken joints of 20mm dia 16 gauge thick conduit pipe of chair verandah complete all as specified and directed.
Supply & Fix hard rubber toes to legs all as specified and shown on drg complete all as specified and directed.
Preparation of old painted surfaces for painting to chair and apply one coat of white synthetic enamel paint to framed chair verandah complete all as specified and directed.
Supply & fixing by welding of MS flat of size 32mm x 455mm x 5mm thick to lower portion of seat of chair verandah (FD/MAP-II/06) complete all as specified and directed.
Supply & fixing of Seat and Back to chair verandah (Drg No FD/MAP-II/06) shall be of 4 mm thick PVC (Weight not less than 1.85 kg) and with 10 Nos groves to seat and back, complete all as specified and directed & shown on drg.
Recanning of chair verandah (Drg No FD-256) with plastic cane (oval shape) 3mm wide and border with 4mm wide cane complete as per Godrej pattern using reputed brand of cane (removing of old broken cane shall be done at BSO yard) complete all as specified and directed.
TEAPOY VERANDAH (FD-383, FD/E6/MAP/17)
Supplying and fixing top of 18 mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around complete all as specified and directed.
S & F Hard rubber/PVC shoes to each legs all as specified and shown on drg complete all as specified and directed.
Preparaing of steel surface of teapoy whereever required by welding and applying one coat of synthatic enamel paint of required colour complete all as specified and directed.
TABLE OFFICE OFFICER STEEL (FD-1003)
Top using of 18mm thick prelaminated particle board ISI marked exterior grade and 6mm thick Teak edging all around complete all as specified and directed.
S & F Hard rubber/PVC shoes to each legs complete all as specified and directed.
Repair/replacement of drawer and box of table using 1mm thick plane black sheet and apply pink primer to prepare syrface all as shown on drawing complete all as specified and directed.
S & F 3 way 4 lever lock to table and other standard makes as approved by GE complete all as specified and directed.
Apply one coat of synthetic enamel paint OG to steel frame , complete all as specified and directed.
CHAIR WRITING (FD/E6/MAP/12)
Removing the old unservicable fabric cover and foam from chair and welded the frame wherever required and preperation of entire surface and apply one coat of synthetic enamel paint of black colour complete all as specified and directed.
Supply and fixing seat and back shall be 12 mm thick hot pressed plywood up hoistered with fabric and moulded polyurethane foam ( shall be 50 mm thick and moulded with density 50.55 kg per cubic mtr) with pvc laping all around. The colour of fabric shall be approved by GE and complete all as specified & directed and shown on drawing.
Supply and fixing a pair of arms made out of black integral skin polyurethane with 75-85 shore 'A' hard ness and reinforced with MS insert to chair writing all as shown on drg complete all as specified and directed.
Supply and fixing rubber stoper shall be provided as shown on drg complete all as specified and directed.
BED HARD STEEL (FD/E6/MAP/08)
Head board used of 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (minimum thickned 1.6mm) shall be provided alround in Head boared, all as shown on Drg complete all as specified and directed.
Foot board used of 18mm thick prelaminated particel board (both side decorative finish shade, standeard PVC edging (minimum thickned 1.6mm) shall be provided alround in foot board, all as shown on Drg complete all as specified and directed.
Supply hard rubber/PVC shoe to the bottom of each leg complete all as specified and directed.
Top of bed used of 12mm thick commercial ply wood of ISI marked and provided 4mm thick teak wood edging the ply and shall be fixed with steel nut and bolts to steel frame, all as shown in Drg complete all as specified and directed.
Supply hexagonal bolt of size 10mm x 50mm complete all as specified and directed.
Apply one coat of synthetic enamel paint black to steel frame of bed hard steel complete all as specified and directed.
CHARPOY GI PIPE WITH 12 MM PLYWOOD M&L for repairing of unsv parts and fixing new parts for items as mentioned below:-
Plywood top made out of 12 mm thick commercial type BWR exterior grade as per existing shape and size complete all as specified and directed.
Removing the existing unsv broken elbows of charpoy GI Pipe and supplying and fixing new 32 mm bore 3 way elbow ISI marked all as specified and shown on drg complete all as specified and directed.
Supply and fixing 05 mm thick GI check nuts suitable for 32 mm dia pipe complete all as specified & directed and shown on drg.
Arneja Builders (BID ID -3387339)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .