Annual Operation and Maintenance contract of E and M installations at Lilabari Airport

Amount

SH-I: OPERATION & MAINTENANCE

Operation & Maintenance of Electrical & Mechanical Installations at Lilabari Airport i/c all areas viz operational and Non-Operational area on all days (including sundays and holidays) on round the clock basis, which involves preventive maintenance, maintenance of records as per AAI/OEM requirement, attending day to day complaints, faults, ensuring 100% serviceability & satisfactory working condition of the installations. The agency is required to deploy minimum manpower in each shift as detailed in special conditions of contract, complete as required and as per direction of EIC.

SH:II PAINTING OF POLES, RUNWAY FITTINGS & REWINDING OF PUMPS

Painting of Street Light poles of following sizes given below with min 2 coats of synthetic Enamel paint of Approved make/colour to give an even shade, including cleaning of surface, numbering & AAI Logo etc., as per the direction of EIC complete as required. Upto 3.5 mtr. Perimeter light poles.

From 3.5 Mtr. to 4.5 mtr. street light/post top lantern poles.

Beyond 4.5 Mtr to max 9.5 Sq.Mtr Poles with Single/double arm bracket.

Painting of following GLF fittings with min two coats of synthetic enamel paint of Approved make/colour to give an even shade, including cleaning of surface, numbering etc. complete as required & as per direction of EIC.

GLF i/c RWY End, Edge, Taxi, Threshold light fixtures etc.

Lifting and lowering of different size submersible pumps i/c necessary connections (electrical & pipe line) dismantling of defective submersible pump set and reinstallion of repaired pump complete as required and as per direction of EIC.

Repairing/Rewinding of single/three phase monoblock / submersible pumps (above mentioned) by replacement of defective bushes, bearings, impellers, water seals, gasket, shaft etc. complete as required (Old dismantled copper winding material may be retained by agency).

Upto & i/c 10HP

SH:III SERVICING, CALIBRATION OF RELAYS & OIL FILTRATION

Servicing, Checking and testing of 3 Ph 11KV 630A HT Oil Circuit Breaker (OCB) including testing of connected CTs & PTs, minor repairing works complete as required including submission of test report from OEM approved labs. (Testing as per OEM standards followed with submission of test report). Make: Alstom

Overhauling & servicing of following capacity ACBs through OEM/authorized service centre of OEM alongwith servicing/testing of all protection relays, testing of protection release of ACBs through secondary injection method where ever applicable, checking of IR value, functional check of all relays, cleaning of all contacts and carrying out all other necessary maintenance works as per OEM's standard. Make: GE power, capacity: upto & i/c 1600A

Servicing, Testing and Calibration of over load and earth fault relays through secondary injection kit including testing of CT / PT etc as per OEM's standard and as per special conditions of contract complete as required. (1set =2no.O/L, 1 no-E/F, 1- auxiliary relay) i/c submission of test reports.

Servicing, Testing and Calibration of transformer protection alarm and trip relays of out going transformers as per OEM's standard and as per special conditions of contract complete as required i/c submission of test reports.

Dehydration/filtration of transformer oil by heat treatment method till transformer oil attains specified BDV as per IS including conducting BDV test before and after filtration complete as required i/c submission of test report.

Supply of Insulating Transformer Oil confirming to IS 335:1993 with latest amendments

Supplying of Silica gel for transformer breather.

SH: IV (Lighting Decoration work)

Provision of decorative lighting on temporary basis in tri-colors i.e Green, White & Saffron on the Facia of Terminal Building, Technical building and other ancillary buildings of Lilabari Airport with LED series lighting of high lumen in all areas (max. 120Mtr length) on the occasion of Independence/Republic day having uniform spacing of rows not more than 0.75 mtrs. for min 03 days period as per the direction of EIC. The facades lighting should be enhanced with tri-color flood lights complete as required & as per the direction of EIC.

Providing tri-colored Arch for entrance gates, main Airport entrance, Terminal building entrance: Tricolor (saffron, white and Green) cloth decoration along with Tri-color balloons.

Making videography of all the decoration made highlighting the theme of min 5 min duration & submit the soft copy in pen drive to EIC complete as desired.

SH:V SUPPLY OF SPARES

Supplying of following sizes ISI marked PVC insulated, Single core, FRLS grade strandard copper cables of 1.1 KV grade confirming to relevant IS of standard length etc as required

Supplying of following sizes ISI marked PVC insulated, Multi core, FRLS grade strandard copper cables/wires of 1.1 KV grade confirming to relevant IS etc. as required

2 X 1.5 Sq. mm

3 X 1.5 Sq. mm

4 X 4 Sq. mm

Supplying of following rating, 240/415 volts, "C" curve, Miniature Circuit Breaker (MCB) suitable for inductive load etc., as required.

6 amps. to 32 amps. ratings , SP MCB, “C” curve, 10 KA breaking capacity

40A, FP MCB

Supply of following switchs, sockets etc., and other miscellaneous items

6 A Piano Type one way switch

6 A 5-Pin Piano Type Socket

16 A 3-Pin Piano socket

16 A Piano Switch

5/10 A one way Modular switch

6 A 3-pin Modular socket

3-pin 6A Top

3-pin 16A Top

Angle Holder

Batten Holder

6/16A Combined Switch and Socket with plastic Box (two fixing holes)

Ding Dong (poliphonic) call bell suitable to operate on 230V, 50Hz, AC supply etc complete as required.

Supply of 2.5 mfd fan capacitor

Supply of following capacity PVC Board, Casing Caping etc. as required.

PVC Casing Caping of 25 mm x 12 mm x 2000mm size

PVC Switch Board 4 x 4

PVC Switch Board 7 x 4

PVC Switch Board 8 x 6

Sypply of 36W Electronic Ballast, 240V / 415V 50Hz AC supply etc as required.

Supply of Fan Regulator two module type (Electronic/step/dimmer Type) suitable for operation on 240V 50Hz AC supply etc as required.

Supply of following 2 pin 9W LED light suitable for operation on 230 V, 50Hz, AC as required.

Single phase class 1 base mounting Energy Meter ( KWH meter) with LCD display, 5-30 Amp without optical port as per approved make).

Supply of following capacity capacitors as required.

3 KVAr Heavy duty (compatible with APFC panel)

5KVAr Heavy duty (compatible with APFC panel)

7.5 KVAr Heavy duty (compatible with APFC panel)

Supply of loop in loop out/junction Box with all accessories etc. complete as required.

Supply of following capacity Al. lugs etc. as required.

16 Sq. mm tinned tubular type

25 Sq. mm tinned tubular type

50 Sq. mm tinned tubular type

70 Sq. mm tinned tubular type

120 Sq. mm tinned tubular type

150 Sq. mm tinned tubular type

185 Sq. mm tinned tubular type

240 Sq. mm tinned tubular type

Supply of following capacity Cu. lugs etc. complete as required.

10 Sq. mm tinned tubular type

16 Sq. mm tinned tubular type

25 Sq. mm tinned tubular type

95 Sq. mm tinned tubular type

SH:V DSR WORKS

To carry out items listed in CPWD schedule of rates DSR (E&M) 2018 as per CPWD specifications. Agency has to quote in % of DSR rates against this item. The amount considered is Rs. 2,00,000/-

M/s North East Electricals

sudarshnacoolingcentre andelectricals

M/s R.S. ENTERPRISE

EASTERN POWER ENGINEERING

ABHISHEK INTEGRATIONS LIMITED

SHREE GOURI ELECTRIC ENTERPRISE