CERTAIN BR REPAIR TO PCC HARD STANDING FOOTPATH, DRAIN CULVERT FENCING WALL AND OTHER ALLIED WORKS AT OLD RS COLABA UNDER AGE BR II OF GE (NW) NAVY NAGAR, COLABA, MUMBAI

Amount

Demolition of cement concrete (unreinforced) in ground floors & paving not exceeding 15 cm thick below & above Ground level complete all as specified & directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons and paving laid dry or laid bedded and pointed in any mortar etc.complete all as specified and directed.

Material & Labour PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation, mass concrete and in subbase to hard standing / floors all as specified and directed.

Material & Labour plain Cement concrete type B - 1 1:2:4 (RMC) (using 20mm graded stone aggregate), plinth protection, mass concrete pavings hardstanding etc, laid in pannel, finished fair & even without using extra cement and spike rolling to surface complete all as and directed including use of formwork where necessary(Note: cement concrete 1:2:4 shall be RMC)

Material & Labour Forming construction joint of width 10 mm & depth 30 mm in cement concrete 100 mm thick priming the surface with primer and filling sealing compound Grade A including necessary form work all as specified and directed.

Material & Labour Forming contraction joint (dummy joint) of width 10 mm & depth 30 mm in cement concrete 100 mm thick priming the surface with primer and filling sealing compound Grade A including necessary form work all as specified and directed.

Material & Labour for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushing complete (Note : Sand cushing shall be measured and paid separetely).

Material & Labour for Machine pressed precast concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type, any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and cushing complete (Note : Sand cushing shall be measured and paid separetely).

Material & Labour for Sand filling under floors or in foundation including watering and consolidation all all as specified and directed.

S & F Precast plain cement concrete prepolished coloured chequerd floor tiles 300 x 300 x25 mm thick machine pressed set jointed and pointed in neat cement slurry mixed with pigment to match the colour of tiles in floors complete all as specified and directed.) Colour, size and pattern shall be approved by GE. (Cement Mortar screed bed shall be measured and paid separately)

Dismantling wrought iron or mild steel work of any description not otherwise provided all as specified and directed.

Supplying & fixing Framed work such as grills, gratings,plane or chequered plates etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed.

Supply & Fixing Rolled Mild Steel Framed work as in plates (plain or chequered) for drain/manhole cover square cut or notched forming holes conforming to Fe 290 E 165 all as specified and directed.

Supply & Fixing Mild steel work in tubular pipes including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 all as specified and directed.

Material & Labour Preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over one coat of red oxide primer all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed by Engineer in charge

Material & Labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified & directed.

Material & Labour for Cement concrete type B-1 1:2:4 ( 20 mm graded stone aggregate) as in cills, steps; seismic and other similar bands, plinth courses, , coping etc concrete complete all as specified and directd.

Material & Labour rendering 15mm thick on fair faces of brick work or concrete in CM 1:4 finished even and smooth without extra cement all as specified and directed.

Material & Labour for precast RCC slabs 1:2:4 type B1 (using 20mm graded stone aggregates) such as manhole cover and similar articles with plain fair faces, including chamfers, weatherings, throating etc. and setting in in CM 1:4 all as directed

Dismantiling of Asbestos cement/Galvalume (Corrugated, semicorrugated, etc.)sheets in roof covering complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Note : The sheet shall be fixed to MS angle with or J hook with incl. wind ties etc & wind ties shall be measured seperately all as specified and directed.

Dismantling old chain link fencing of any size or mesh all as specified and directed.

Supply only Chain link MS galvanisd fencing, 3.80 mm dia, mesh size 100 X100 mm all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including with flat iron, binding and jointing complete incl all necessary drilling, bolting or riveting etc confirming to Fe 410.

Taking down CI soil/waste/vent/rain water pipes including all fittings like shoes bends swan necks etc of any dia all as specified and directed.

Supply & Fixing CI soil/waste/vent pipe in any length with ears 100mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

Supply & Fixing CI soil/waste/vent pipe in any length with ears 75mm bore (sand cast) in any length with cement joints fixed to walls complete all as specified directed.

Supply & Fixing CI bends (any radius) for soil/waste pipes 100mm bore diminishing pieces or tapers on walls complete all as specified.

Supply & Fixing CI bends (any radius) for soil/waste pipes 75mm bore diminishing pieces or tapers on walls complete all as specified.

Supply & Fixing CI branch piececs single (equal or unequal) ordinary or inverted (spigot or socked type) with parallel branches for 100mm bore pipe (Y or T) all as specified and directed.

Supply & Fixing in repair vitreous china ware wash hand basin white, flat back, size 550 x 400 mm size (flat back or angle back type) including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge.

Supply & Fixing 32 mm dia Waste fittings, brass chromium plated suitable for glazed ware sinks, wash basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repair pillar tap 15mm bore, cast copper alloy fancy type chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratry with plugs, washers and wastes; including beading in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmX460mmXbowl size 410mm X 330mmX160mm complete as directed.

Complete removal of existing treatment, preparing surfaces, plastered or unplastered old surfaces priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of distemper oil bound, white or tinted on walls incl a coat of white cement putty all as specified.

Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed .

Material & Labour plastering 20mm thick in two coats 15 mm Backing coat in CM 1:4 and 5 mm thick setting coat in CM 1:3 using WPC of approved make on Brick or concrete surfaces with recrene finish all complete as directed by EIC.(WPC shall be measured & paid seperately)

Supply only water proofing compound all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.

Removing demolished/excavated materials and debris laid at Navy Nagar outside MD land all as specified and directed.

DHARICHHAN ENTERPRISE

satguruenterprises

SHREE JAGDISH FURNITURE CO.

M/s. MAYUR ENTERPRISES

SHRI SAI ENTERPRISES