PROVISION OF CERTAIN LBW, RW AND SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Excavation in trenches not exceeding 1.5 m wide and not exc.1.5 m in depthfor foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in hard/ dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Excavation in post holes ( or similar holes) each n.exc. 0.50 Cum, getting out, returning, filling in and ramming earth or borken rubble mixed with earth around, in layers n.exc. 25 cm thick in hard/ dense soil complete all as specified and as directed.

Material and labour for sand filling under floors or in foundations including consolidation complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 250m and not exc.500metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for PCC (1:5:10) type E-2 (using 40 mm graded broken stone aggregate) as in foundations, filling, sub base and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Material and labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed.

All as per serial Item No. 12 above but except stone.

Supply and fix for factory made 50 mm thick, 900mmX650mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles complete all as specified and as directed.

Supply and fix for factory made 50 mm thick, 600mmX600mm manhole cover with additional frame for fixing, of precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished the surface even and fare including reinforcement as per manufacturer's design and set in CM 1:4 and handles complete all as specified and as directed.

Material and labour for green marble 12mm thick (table rubbed and polished) as in skirting/ border/ jamb/cill/floor, laid over and including 10mm thick rendering in cement mortar (1:3) with cement slurry, jointed with grey cement slurry mixed with pigment to match the shade of slab complete all as specified and as directed.

Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 12 to 20mm thick granite/ green marble slab complete all as directed.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 30mmx 6mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick wood grain printed PVC sheets and edges will be painted to match with printed sheet, reinforced with mild steel square tube complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix factory made solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles), with particle board core, with 2,4, or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC Sheet polyurethane painted on the front face & 2 mm thick prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing given in MES SSR part -I and II.

Supply and fix factory made solid PVC Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles), with 2,4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face & 2 mm thick prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing given in MES SSR part -I and II.

Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws complete all as specified and as directed.

Supply and fix for 200 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws complete all as specified and as directed.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Supply and fix for 250mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Supply and fix for 100mm size mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and as directed.

Supply and fix for 75mm size butt hinges, extruded brass, type D-11 with stainless steel hinge pin, bright polished and fixed with screws complete all as specified and as directed .

Supply and fix for 150mm size aluminium handles, anodised, cast type complete all as specified and as directed.

Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised fixed with stainless steel screws complete all as specified and as directed.

S&F in repairs stainless steel single towel rail 600mm long including built in side brackets ,Cat No. ACN-1111SM of make Jaquar ‘Continental' Series or equivalent of Make as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 11 to 15mm complete all as specified and as directed

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

Supply and fix for mild steel work in tubular trusses, main columns, posts, for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Welded steel wire fabric supplied and fixed complete to wood or steel members Weight per square metre N exc 4 kg complete all as specified and as directed.

Supply and fix steel rolling shutters, thickness of laths 1.25mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle including taking down old unserviceable rolling shutter complete all as specified and as directed

Supply and fix safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed

Supply and fix ball bearing for rolling shutters complete all as specified and as directed

Supply and fix for pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, including PCC (1:3:6), type C-0,( using 12.5 mm graded stone aggregates) as in filling of pressed steel frames complete all as specified and as directed .

Supply and fix for aluminium anodised powder coated louvered ventilator with provision of exhaust fan opening with adjustable louvers using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix for aluminium anodised powder coated three track sliding window with two glazed shutters, one shutter with and including 4mm thick ordinary quality float glass and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc. complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted/ black glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

Material and labour for 0.80mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 120gm/ Sqm complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet tile profile of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridge, valley gutters fixed with self tapping screws with side lap complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as directed.

Cutting out cracks to 'V' section (shape) in existing roof slab or terracing cleaning out, wetting and grouting with cement and sand slurry (1:3) complete all as specified and as directed.

Material and labour for two coats of Latex shield 2K make Berger or equivalent grade of pidilite in sunken portion , terrace /roof complete all as manufacturer's instruction and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, racks and wall panelling, to the size and pattern as directed including fixing on walls, floors etc. complete all as specified directed.

Material and labour for 12mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.5mm x 23.5mm x 1.5 mm thick main tee, 25 mm x 23.5 mm x 1.28 mm cross tee and 25mm x 23.5mm x 1.2mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE).

Material and labour for false ceiling with 10mm thick 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound/ acrylic distemper over a coat of primer complete all as specified and as directed. Note: POP ceiling to be made in two/ three tier design.

Material and labour for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling including dismantling existing complete all as specified and as directed.

M & L machine cut cudappah stone slab 20-25mm thick as in lintels, shelves, vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab or arldite including rubbing and polishing complete all as specified and as directed.

Material and labour 75mm thick PCC (1:2:4) type B2 (using 40mm graded broken stone aggregate) as in floor finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 100mm thick PCC (1:2:4) type B2 (using 40mm graded broken stone aggregate) as in floor/hard standing finishing the surface even and smooth without using extra cement including making necessary joints complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand (all by weight) complete all as specified and as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in sub base floor finishing the surface even and fair complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in roof padding, flooring using water proofing compound as per manufacturer's instruction complete all as specified and as directed. (Note: Supply only of waterproofing compound shall be measured and paid separately under relevant item).

Material and labour for coloured designer wall concept ceramic tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured, glazed ceramic tiles, of size 600mm x 300mm x 7 to 8mm thick as in vertical surface, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exc. 0.36Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exc. 1.00 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for coloured, dark shade, vitrified ceramic tiles, polished of size 600mm x 150mm x 10 mm thick as in skirting/dado, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete coloured interlocking tiles, paver block, glossy, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for 5mm thick rendering in cement mortar (1:3) on fair faces of brick or concrete surfaces as in ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on surface other than fair faces of brickwork or on one side of lathing or on stone masonry wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, mixed with integral water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, mixed with integral water proofing compound @ 3% by weight of cement, finished even and smooth without using extra cement with spong finish complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered to receive new finish complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling using steel wire brush, sanding machine, rubbing ivory papers etc and washing , rubbing down and stopping of distempered and painted surfaces, preparing surfaces plastered or unplastered to receive new finish complete all as specified and directed.

Material and labour for appying 1.5mm thick white cementitious wall care fine putty on walls, filling cracks by crack filler and smoothen surface with sand paper complete all as specified and as directed.

Material and labour for appying two coats of acrylic distemper of approved tint on wall surfaces complete all as specified and as directed.

Material and labour for appying two coats of acrylic distemper of approved tint on ceiling surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered wall surface and appying two coats of 100% acrylic exterior emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for complete removal of existing treatment, preparation of surface and appying two coats of 100% acrylic exterior emulsion paint over a coat of primer to mangalore tiles, roof, parapet, wall, floor etc. on heritage buildings complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound/ acrylic distemper over a coat of alkali resistant priming paint complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall/ ceiling surfaces and applying two coats of oil bound distemper over a coat of priming paint and white cementitious wall care fine putty complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered wall surfaces by washing, rubbing down and stopping of distempered surfaces and applying one coats of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered ceiling surfaces by washing, rubbing down and stopping of distempered surfaces and applying one coats of acrylic distemper complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered wall surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coats of oil bound/ acrylic distemper complete all as specified and as directed.

M&L for two coats home shield PU roof coat of BERGER paints or equivalent chemical of Pidilite over roof and chajja for water proofing including preparation of surface complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Material and labour for preparation of old treated plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed

Material and labour for preparation of old treated plastered surfaces of walls by washing, stopping and rubbing down and appying two coat of acrylic distemper complete all as specified and as directed.

Material and labour for applying two coats of lustre paint (water based) over a coat of primer on wall surface complete all as specified and as directed.

Material and labour for preparation of new surface of wall and applying two coats of lustre paint (water based) over a coat of primer over one coat of 1.5mm thick Birla white wall care cement based fine putty complete all as specified and as directed.

Material and labour for applying two coats of lustre paint (water based) over a coat of primer over one coat of 1.5mm thick Birla white wall care cement based fine putty complete all as specified and as directed.

Material and labour for hacking out old broken glass (any thickness, size, quality of description) from wooden frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty/ bead in square not exc. 0.5sqm in each pane complete all as specified and as directed.

Supply and fix for 12mm thick toughened glass with etching as in openable door/ bathing cubical/ partitions including chamfered edge polishing fixed with necessary Ozone path touch fittings and fixtures etc. as per manufacturer's instructions complete all as specified and as directed.

Supply and fix for 25/32mm dia stainless steel pipe as in railing, fixed with necessary cups at bottom, grade of stainless steel 304L complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material/ asbestos cement surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix for 20mm bore steel water tubing 'medium grade' galvanised, with all fittings as in trenches complete all as specified and as directed.

Supply and fix for 25mm bore steel water tubing 'medium grade' galvanised, with all fittings as in trenches complete all as specified and as directed.

Supply and fix for 32mm bore steel water tubing 'medium grade' galvanised, with all fittings as in trenches complete all as specified and as directed.

Supply and fix 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 25 to 32mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Supply and fix for 500 litres capacity, rotational moulded polythelene water storage tanks (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion including 20mm size brass float valve, high pressure, with polythene float and flynut and connected fittings including dismantling existing tank complete all as specified and as directed.

Supply and fix for 1000 litres capacity, rotational moulded polythelene water storage tanks (ISI marked) (cylindrical vertical with closed top), hoisted and fixed in postion including 20mm size brass float valve, high pressure, with polythene float and flynut and connected fittings including dismantling existing tank complete all as specified and as directed.

Supply and fix in repair bib tap for 15mm bore pipe, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make: Prayag ‘Naptune series Cat No. PIS-06 or equivalent of makes as per Appx 'B' as approved by GE complete all as specified and as directed.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion ' series or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs 15 mm bore pillar tap (old handle) PTMT any colour high pressure screwed for iron pipe all as per Cat No.130-0 (Standard Series) of make Prayag or equivalent of makes as per Appx 'B' as approved by GE complete all as specified and as drected. (Minimum weight 110 gms).

Supply and fix in repairs, chromium plated pillar cock 15mm dia quarter turn as per Cat No.FUS-29001 of make Jaquar ‘FUSION ' series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs for 15mm dia stop cock (male thread, old handle) standard of PTMT any colour high pressure screwed for iron pipe all as per Cat No.141-0 (Standard Series) of make Prayag or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs for 15mm dia angle cock (old handle) standard of PTMT any colour high pressure screwed for iron pipe all as per Cat No.144-0 (Standard Series) of make Prayag or or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs chrome plated quarter turn wall mixer 3-in-1 system with provision for both telephone shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs Cat No. FUS-29281 of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for CP maze overhead shower 300X300mm square shape single flow (body and face plate stainless with chrome finish) with rubit cleaning system complete all as specified and as directed. Make: Jaquar Cat No. OHS-CHR-1639 Rain showers or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs for chromium plated soap dish ,Cat No.ACN-1131N of make Jaquar ‘CONTINENTAL' Series or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 15mm bore, ISI marked complete all as specified and as directed.

Supply and fix for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 20mm bore, ISI marked complete all as specified and as directed.

Supply and fix for gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe 25mm bore, ISI marked complete all as specified and as directed.

Supply and fix in repairs for 15mm dia bib cock standard (old handle) without flange of PTMT any colour high pressure screwed for iron pipe all as per Cat No.121-0 (Standard Series) of make Prayag or equivalent of makes as per Appx. 'B' as approved by GE complete all as specified and as directed.

Supply and fix for grating doom round 100mm dia of PTMT (minimum weight 25gms) complete all as specified and as drected. Make: Prayag ‘Naptune series Cat No. 111 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for grating doom 125mm dia with waste hole of PTMT all as per Cat No. 113 of make Prayag or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as drected.

Supply and fix in repairs for over head shower of PTMT round 75mm any colour for fixing with 15mm pipe all as per Cat No.1813 of make Prayag or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repair CP Urinal spreader for fixing with 15 mm dia pipe all as specified and as directed.

Supply and fix for 15mm size PVC connection 450mm long including PTMT nuts etc complete all as specified and as directed

Supply and fix in repair for 15mm size PVC connection 600mm long including CP brass check nuts etc complete all as specified and as directed

Supply and fix for stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm bore pipe complete all as specified and as directed.

Supply and fix for stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 110mm bore with access door complete all as specified and as directed.

Supply and fix for PVC (SWR) bends any radius of 75mm bore with access door complete all as specified and as directed.

Supply and fix for PVC (SWR) branch piece, single Y, equal or unequal with access door for 75mm bore pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) junction single, (single T) equal or unequal for 110mm bore pipes with access door complete all as specified and as directed.

Supply and fix for PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.

Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Supply and fix for PVC (SWR) floor trap 75 mm dia of outlet, plain with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Material and labour for PVC (SWR) gully trap 125/ 110 setting and jointing with solvent cement complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D2 ( using 40mm graded broken stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipe all as specified and as directed.

Material and labour for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested complete all as specified and as directed.

Material and labour for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipe complete all as specified and as directed.

Supply and fix in repair for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern, including provision of lime concrete and PVC high level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets including 32mm dia PVC flush pipe and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix in repair vitreous China half stall type, white bowl urinal flat back, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, including 5 ltrs capacity PVC automatic flushing cistern with brackets, 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix in repair vitreous China urinal full stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix in repair for vitreous chinaware wash hand basin, white, flat back, size 550x400 mm including 32mm dia. chromium plated, CP waste coupling, chain and plug, waste fittings, union and PVC waste pipe 32 mm dia of 90cm long, CI brackets and all necessary inlet outlet connections complete all as specified and as directed.

Supply and fix in repair for vitreous china counter type oval shape wash basin coloured (Pastel) with and including 20mm thick granite top of choice colour as approved over and including 25 to 30mm thick cudappa stone slab of size 1.00m X 0.70m with 75mm wide granite strip duly full moulded on upper face fixed horizontally and 75mm wide granite strip vertically supported by 2 Nos and horizontally 1 No. slab of 40mm thick cudappa stone slab one side mirror polished, making necessary cut in granite and cudappa, CP brass waste coupling of 32mm bore brass chromium plated bottle trap with inlet and outlet, screwed for pipe, including 15mm bore pillar tap fancy type, cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe minimum finished weight 0.665 kg, PVC waste pipe 32mm dia, brass chromium plated waste coupling 32mm dia with check nuts to inlet and outlet screwed for iron pipe or connection including necessary packing, union and cap etc. complete all as specified and as directed. Make : Hindware Cat No. Zen-10049 Pastel or equivqlent from Cera/ Parryware as approved.

S&F in repair 5mm thick float glass looking mirror with with 6mm thick ply wood back and aluminium powder coated frame complete all as specified and as directed..

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as directed.

Dismantling framed trusses, span exc 10m but not exc 15m complete all as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets/ grid etc complete all as directed.

Demolition and breaking up 75 to 110mm internal dia drain pipes (salt glazed earthern ware, PVC/ AC or reinforced concrete), set in cement mortar complete all as directed.

Demolition and breaking up 150mm internal dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as directed and directed.

Supply, laying and testing for LT XLPE UG cable insulated screened PVC bedded galvanised steel strip or wire armoured, heavy duty electric power cables with stranded aluminium conductor 1100 volts grade with cable glands, lugs etc laid in trenches/ floor, fixed on wall/ pole/ service connections including brass cable glands/ end terminals/ lugs, clamps etc. of size 10 Sqmm 4 core cable including connecting to main switches/ cut outs/ MCCB complete all as specified and as directed. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit including removal of batten/ conduit/ gutties/ wooden boards/ switchs/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Taking down the existing unserviceable street security light fitting any type/ capacity from pole including disconnecting and removing pipe bracket etc. and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable earthing and making good the disturbed surfaces complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, 20 mm dia rigid PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ ceiling etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.181 here-in-before but point wiring for one ceiling/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.181 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on same board.

All as per serial item No.181 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.181 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing and capping including all accessories, GI sunken/ surface boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with 3mm thick hylem sheet, ISI marked for switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5 Amps complete all as specified and as directed.

All as per serial item No.186 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5 Amps and regulator.

All as per serial item No.186 here-in-before but point wiring for one 3 pin 5 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.186 here-in-before but point wiring for one 3 pin 5 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.186 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15 Amps socket outlet on independent board.

Supply and fix for modular switch, one way 6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 16 Amprs, 1 module with neon indicator complete all as specified and as directed.

Supply and fix for modular socket outlet multi purpose 2/3 pin 6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 2/3 pin, 6/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type fan regulator 120 watt 1 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for switch piano flush type, single pole, one way, 6 Amp complete all as specified and as directed.

Supply and fix for socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, flush type complete all as specified and as directed.

Supply and fix for switch socket combination, 2 in 1, 3 pin 5 Amps and 15Amp flush type universal complete all as specified and as directed.

Supply and fix for sheet metal enclosures single pole and neutral with a two pin and earth plug and socket complete with one MCB SP 20/32 Amp complete all as specified and as directed.

Supply and fix MCB Protected Socket with sheet steel enclosure SRCD(socket residual current device) single pole with a three pin socket with top complete with 20 Amps MCB single pole. Make; Havells Cat part No DHDMCSN0251020 OR Equivalent C&S/Indo Asian/L&T/Bajaj/Legrand

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door prewired type with cable end box , flushed in wall and making good to disturbed surfaces, including connecting with existing cable complete all as specified and directed. Note : Quoted Rate is deemed to inclusive of Stickering/Marking/writing of Quarter numbers in concerned meters as directed by Engr-in-Charge. Make :Havells Cat Part No DHDPSHOSRW08 OR EQUIVALENT L&T/LEGRAND/SCHNEIDER

Supply and fix for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

S & F for sheet metal enclosure TPN phase segregated distribution board double door vertical type 4 way 415 volts, 50Hz suitable for MCCB incommer IP 43 protection with 200 Amps rated bus bar, neutral links, fixed on wall/ floor and making good of distrubed surface to match with existing and electrical connections complete all as specified. Make: Havells Cat Part No DHDLVDRWGOFO04 - Loadline or equivalent of L & T/Jaquar/Schneider

Supply and fix for MCB SPN rated capacity 40 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCCB, four pole, 415 Volts, adjustable type with thermal magnetic release, with breaking capacity 18KA, Ics = 100% Icu with extended terminal including necessary electrical connections suitable for fixing on DB of capacity 63Amps complete all as specified and as directed.

Supply and fix for ceiling rose, 2/3 terminals, PVC/ polycarbonate type, isolated body suitable ISI marked complete all as specified and as directed.

Supply and fix for LED 10 watts batten aluminium extruded with decorative end caps all as per Cat No. BCLSB 10 NW/ WH of make Bajaj, Wipro Cat No. LL20-111-XXX-65-NE or its equivallent model in Havells, Philips as approved complete all as specified and as directed.

Supply and fix for energy saving new generation 10 watts LED bulk head fitting IP-65 luminaire with opal diffuser prewired and necessary mounting arrangements, provision of 3 core multistranded copper conductor of size 23/0.193 from ceiling rose with LED bulb all as per Cat No.BIBWP 10W LED of make Bajaj/ Philips Cat Part No WT140LED 7SCW PSU or its equvalent in Wipro/ Havells complete all as specified and as directed.

S & F for recess mounted series of downlighters with low depth square, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office & retail spaces square type LED panel 15 watts, operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as directed by Engineer- in-charge. Make- Bajaj Cat part No - BPSLR 15W WH SQ, Philips Cat Part NoSM251C LED16S- 6500 PSU WH or SYSKA Cat part No SSK-PPL-15W

Supply and fix for wall mounted LED 20watts with lumens out put not less than 2000 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BCLAB 20W of make Bajaj, Cat No. LL20-281-XXX065-ALI of Wipro or equvalent of make Philips/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed.

Supply and fix for recessed mounted low depth LED luminaire 2'x2' square LED panel 36 watts aesthetically designed and 4x1 flat panels to enhance the delight of occupants with classic design and glare free soft illumination operating voltage 140-270 volts, AC, 50 Hz all as per Cat No.BZRSQL 36W GZ1 WH of make Bajaj or equivalent of make Philips/ Wipro/Jaquar/ Crompton as approved complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 25 watt with high power LEDs as light source and electronic driver with lumens out put not less than 2500 lumens, with prewired all as per Cat No. BRLEP 25 W LED WH (Edge plus series) of make Bajaj, Philips CAT part No. BRP042 LED HP CW 25W or equivalent of make Wipro/ Havells/ Crompton/ as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts complete all as specified and as directed.

Taking down ceiling fan of any sweep, keeping with safe custody and deposit to EM store yard of AGE EM North including transportation and loading and unloading fan complete all as specified and as directed.

Supply & Fixing ceilling fan single phase, 230 volts, 50 Hz, 1200 mm sweep white colour with blades, down rod, canopy, clamp with safety pin, nuts, bolts complete set and connecting up with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connector to fan, BEE 5 star rated, ISI marked complete all as specified and directed. Make Bajaj Kessals 50 ISI, or its equivalant in Crompton, Havells, Usha, Bajaj, Orient. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge.

Supply and fixing of exhaust fan plastic body of 200mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan including taking down old exhaust fan and depositing to store yard of AGE E/M North Pune complete all as specified and directed. Maqke: Bajaj Cat Part No. Maxma DX 8" or equivalent of Cromptoon, Havells

Supply and fixing of exhaust fan plastic body of 250mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat Part No. Ventil Air DX White or equivalent of Cromptoon, Havells

Supply and fix for water heater storage type (Geyser) vertical type with copper inner container of capacity 25 litres, electrically operated, AC 230 Volts including 04 Nos of hold fastener nuts of required suitable size fixed in brick wall including PVC connection pipe (copper) chromium plated 8mm dia both ends threaded with brass coupling bolts both side, cone washer, not less than 45cm long suitable for hot/ cold water system complete all as specified and as directed. Make: Havells Cat part No. GHWASESWH025 or equivalent of Recold/ Bajaj

Supply and fixing of exhaust fan metal body of 230mm sweep, AC single phase, 240 V, heavy duty including metallic louvers and shutter and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan including making opening for fixing and making good as per existing as per site requirement complete all as specified and directed. Make: Havells Cat No. Ventil Air- DX White or equivalent of Crompton, Bajaj.

Material and labour for air termination, single pointed, copper rod 12mm dia and 1.0 metre long including proper fixing arrangement on roof of building with PCC 1:2:4 type B-1 for its strength of required size including taking down existing one complete all as specified and as directed.

Material and labour for test point terminal block made of gun metal or phosphorus bronze size 75x75x50mm drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head screw fixed on wall with 01 No. epoxy bonded insulator for fixing of earth terminal strip complete all as specified and as directed.

Material and labour for copper strip 20 x 3mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, making good to disturbed surface including taking down existing one complete all as specified and as directed.

Supply and laying for 40mm bore GI tubing light grade including all fittings and fixed for supporting the air temination rod and for protection of copper strip including PCC 1:2:4 type B-1 as required complete all as specified and as directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I . (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for earthing complete with copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to copper earth lead strip 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board/ neutral of transformer as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 40mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I and taking down old existing unsesrviceable earthing. (Note: Copper earth strip and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid PVC casing capping and accessories including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit white/ ivory and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid PVC casing capping and accessories including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 10.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit white/ ivory and conduit accessories concealed in wall including two run of single core PVC insulated 10.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 10.0 Sqmm, two run of 10.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. 3. The site is in scattered area. The building(s)/site(s) shall be handed over in phases and the contractor will have to arrange his working programme accordingly. No claim whatsoever for not giving the entire site on award of work and for giving the site gradually will be admissible, except granting fair and reasonable extension of time.

R J ENTERPRISES