SPECIAL REPAIR AND ADDN/ ALTN TO OFFICER INSTITUTE BLDG AND SPECIAL REPAIR TO BER COOLING APPLIANCES AT CME, PUNE

Amount

Dismantling wrought iron of any description complete all as specified and directed.

S&F Framed work such as roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.

S&F rolled sections as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.

M & L for preparation of new or previously untreated surfaces of iron and steel of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness all as directed.

M &L false ceiling with 4 mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.60 x 0.60 m consisting of GI angle supported on wall of size 24 mm x 28 mm x 0.7 mm main tee of size 24 mm x 38 mm x 0.7 mm cross tee of size 24 mm x 28 mm x 0.7 mm using purpose made members interlocking to made to shape at 1200 mm c/c fixed with 3mm dia. GI wire suspender and making holes etc. all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of grid work : Armstrong/ swastik/ Techno Grid and 'E' board Gypsum or equivalent approved all as specified and directed.

M & L Cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in copings, bed plates, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling stone slab laid bedded and pointed in cement mortar of any description or thickness in floor aprons etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises all as directed.

M&L for pre-cast PCC block masonry in precast cement concrete type C-1, 1:3:6, 20mm graded stone aggregate as in wall exc. 10 cm width and set in CM 1:4 complete all as specified and directed.

M& L 20 mm thick, Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed.

Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar situation complete all as specified and directed.

M & L Hardcore using broken stone or boulders not exceeding 63mm deposited spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified & directed.

Taking down cement plaster on brick or stone walls or concrete surface etc including raking out joints, hacking for key, scrubbing down with water all as specified and directed.

Taking down chowkats or frames, exc. 1.50 Sqm but not exc. 4.00 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F powder coated Aluminium sliding windows three track with two glass shutters using 5 mm thick glass tinted and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperture 1.61mm, using Aluminium powder coated sect, aluminium cleat, PVC track, bearing, handle lock rubber beading, etc complete including taking down old window of any size. Note Size of aluminum sections are as under :- (i) Three track top & vertical – Jindal main – 2010 Section No 20621. (ii) Three track bottom - Jindal main – 2010 Section No 20620. (iii) Shutter vertical section - Jindal main – 2010 Section No 20606. (iv) Shutter top & bottom - Jindal main – 2010 Section No 20604 (v) Shutter vertical middle (interlock) - Jindal main – 2010 Section No 20605.

S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed//pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size including taking down old doors complete comprising the following:- (a) Aluminium colour anidised door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per spd. (c) Aluminium colour anodised Top & stile shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002. Make-Jindal (f) Floor spring Make-Sandhu, (g) Six lever mortice lock brass Make : Godrej/Classic on in each door (h) 12 mm thick particlular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass(Colour) 5mm thick Make : Saint gobain, modiguard. Note : If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-Charge.

M&L 15mm thick cement plastering on stone masonry surfaces in CM (1:4) finishing surfaces even and fair without using extra cement over and including 10mm thick dubbing out on irregular face of wall in CM 1: 4 complete all as specified and directed.

M&L rendering 5mm thick on concrete surfaces in CM 1:3 on ceiling, finished even and smooth with sagol all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying complete wall with POP/ putty for making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying complete ceiling with 3mm POP/ putty for making smooth surface and applying three coats of white wash all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surfaces of size 450x350x7 mm thick set and jointed in neat cement slurry incl pointed in white or colour cement to match the shade of tiles, over and incl rendering 15mm thick cement mortar1:4 complete all as spd & directed.

Removing existing/old damaged roof treatment of any (Brick tiles and Mudfuska) description by scrapping with using wire brush and removing the same from the site(s), to a distance exc. 250 m and not exc. 500 m complete all as specified and directed by Engr-in-Charge. Note: Dismantling all water tanks and after roof treatment, connect all tanks during working time if any tanks, float valves, GI pipes damaged contactor should replace the same (upto all stories)

M&L for Roof Treatment on existing Concrete Surfaces with the following Specifications:– (a) Rendering 10mm thick in Cement Mortar 1:4 including mixing of Water Proofing Compound (WPC) as per Manufacturer’s Instructions on Cleaned Concrete Surfaces of Roof after applying a Neat Cement Slurry @ 3.0 KILO-GRAM PER SQUARE METRE, Plastered Surfaces Fair finished including Curing of Plastered Surfaces for 7 DAY by ponding of Water over the Roof (Levelling Course) and applying two coats of DR fixit coat over cement plaster (b) Applying evenly one Coat of Cold Bituminous Primer conforming to IS-3384-1986 @ 0.30 LITRE PER SQUARE METRE on the Cleaned Plastered Surfaces. (c) Only a Coat of Blown Hot Bitumen of Grade 85/25 @ 1.20 KILOGRAM PER SQUARE METRE on Primed Surfaces. (d) Applying a layer of APP based Polymeric Membrane, 3.0mm thick (minimum) Weighing 3.0 KILOGRAM PER SQUARE METRE (reinforced) with Polyester Non Woven Fabric weighing not less than 160 GRAM PER SQUARE METRE by Torch application. The Overlap shall be minimum 100mm on Traverse direction and 75mm on Longitudinal direction and Sealing Overlap. (e) Applying evenly one Coat of Aluminium Paint @ 0.10 LITRE PER SQUARE METRE over the APP Based Polymeric Membrane. (f) PCC 1:2:4 type BO using 12.5mm graded stone aggregate for levelling course, filleting and benching slightly rounded or chamfered on edges.

Dismantling water tanks and removing, capacity exc. 500 & not exc. 1000 ltrs complete all as specified and directed.

S&F 1000 ltr. Capacity rotational moulded polyethylene water storage tanks cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and as directed.

M&L 20mm bore dia ball brass valves, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended reinforced work . Note : (i) Work need to be carried out for portions ordered to be dismantled. (ii) Rate quoted shall deem to include for scaffolding required for demolition work.

M & L for preparation of old steel surface of any description, over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed

M& L false ceiling of POP gypsum board of size 600Xmmx600mmx12mm thick and frame made out of MSGI BPS grade, angle 24mmX24mmX0.43mm, Tsection 24mmX25mmX0.30 mm and main runner T section 24mmX38mmX0.35mm complete with angle fixed to wall with rawl plug 100mm long maximum 600 mm c/c, hanging with 2.50/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No. per sqm complete including designer cornice at egde and anywhere else as reqd, and suitable provision for electric fittings and painting with two coats of OBD over one coat of primer after preparation of surfaces complete including dismantling of old ceiling of any description and any size any height etc complete all as per manufacture instruction and all as directed.

M & L for preparation of old surface of ceiling and applying one coat of oil bound distemper complete all as specified and directed.

M & L for complete scraping down of old decorative surface of walls with steel wire brushes of smoke spots, moulds, moss efflorecent salts and applying complete wall with 3mm POP/ putty for making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.

M & L for preparation of old surfaces of wall of any description and applying one coat of luster paint over existing luster paint surface complete all as specified and directed. Note : The shade/pattern as approved by the Engineer -in-Charge.

M&L 75 mm thick cement concrete 1:3:6 type C-2 (40mm graded stone aggregate) as in floors, plinth protection, path etc smooth finished surface without using extra cement complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, Ceiling rose, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. credit for above items should be made as per conditions separately.

M&L for point wiring with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.50 sqmm green in colour FRLSH PVC copper conductor cable for earth continuity connected to common earth dolly incl PVC box surface/ flush type with PVC sheet for mounting fittings such as switches, sockets, fan regulators, etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc for the following :-

One light point controlled by one switch

One fan/exhaust fan point controlled by one switch and regulator

Socket outlet, three pin 5 Amps on the same board

Socket outlet, three pin, 5 Amp, independent

All as per item No.39 above, but with 2.5 sqmm cable and 2.5 sqmm for earth continuity for multipin 15 amps socket outlet flush type on independent board.

S & F ceiling rose, 3 terminal PVC/polycarbonate isolated body, surface bakelite 65 x 50 mm, 3 terminal incl PVC square block complete all as specified and directed.

S & F lamp holder, PVC/polycarbonate type with back plate suitable for batten fitting incl PVC square block complete all as specified and directed.

S&F switch Modular, one way 6 amps, 1 module with suitable plate and cover complete all as specified and directed.

S&F switch modular one way 16 amps, 1 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F socket modular 6A, 2/3 pin combined 2 module with suitable plate and cover complete as per exisisting make and model all as specified and directed.

S&F socket modular 6A/16A, 2/3 pin combined 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F modular fan regulator step type 120W, 2 module with suitable plate and cover complete as per existing make and model all as specified and directed.

S&F surface and wall mounted LED batten (LED tube light fitting 20W) with polycarbonate housing & integrated electronic driver alongwith LED tube 20 watt and 02 No PVC square blocks incl taking down old UNSV fitting. Make:- Havells cat No LUMILINEBS20WLED830SPCWH or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/ C & S / Bentec India Ltd./ Luker.

S & F Decorative ultra slim with polycarbonate housing with high lumen output environmental friendly, energy efficient ready to use pack surface and wall mounted LED batten (LED tube light fitting complete 10W) with integrated electronic driver and 02 No PVC square blocks incl taking down old UNSV fitting.

S&F building security LED light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 including suitable size bracket incl taking down old UNSV one. Make - Havells cat No ENDURASUNDOWNSL25WLED765PASYBOPCIHD or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/ C & S / Bentec India Ltd./ Luker.

S&F Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp E27 base incl taking down old UNSV one. Make- Havells cat No LHFOAJD1TZ1I060 or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/ C & S / Bentec India Ltd./ Luker.

Supply and fix Cylindro Track Light With the high power LED, CYLINDRO 15 Watt offers various luminous intensity levels from 1500-3500 Lumen which is the perfect alternate to conventional HID lamps. Suitable for 3 circuit-4 wire universal tracks. Make- Havells cat No CYLINDROTS15WLED830S3WIRE38DWHT or equivalent of Philips/ Bajaj/ Crompton Greaves/ Wipro/ Shakti/ Halonix/ Jaquar/ C & S / Bentec India Ltd./ Luker.

M&L for sub main wiring with two run of 10 sqmm single core multi stranded PVC insulated and unsheathed copper conductor (red for phase and black for neutral) of grade 1100 volt FRLSH cable in and including 1100 volt electrical grade PVC Conduit of desired colour not less than1.2 mm thick and 25 mm wide & 10 sqmm copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly connected with earth dolly complete all as specified and as directed incl taking down old unserviceable one.

All as per item No.53 above, but size 6 Sqmm two runs and with one run 6.0 sqmm FRLSH copper wire for earth continuity.

All as per item No.53 above, but size 4 Sqmm four runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

All as per item No.53 above, but size 4 Sqmm two runs and with one run 4.0 sqmm FRLSH copper wire for earth continuity.

Supply and fixing PVC cable ducts 75 x 45 mm with all accessories for fixing of sub main wiring drawn through cable duct along wall complete all as specified and directed.

S&F in replacement enclosure, single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps, 240 volt all as specified and directed.

Supply and fixing in replacement industrial wall mounted plug socket 32 Amp, 3 phase including MCB TPN 32 Amp complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers and fixing arrangements such as plywood 18mm thick of suitable size all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and fixing arrangements such as plywood 18mm thick of suitable size all as specified and directed.

S&F in replacement MCB distribution board Double door SPN 240 volts 12 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc all as specified and directed.

M & L in replacement MCB distribution board double door 415 volt, TPN 4-way all as specified and directed.

S&F in replacement MCB distribution board Double door SPN 240 volts 8 way with 200 amps rated bus bar and making good to disturbed surfaces of floors walls etc all as specified and directed.

S&F in replacement MCB distribution board double door 240 volts 4 way with 200 amps rated bus bar and making good to disturbed surfaces of floors, walls all as specified and directed.

S&F in repairs load line vertical TPN distribution board 4 way including 1 incommer MCCB of 125 Amps 4 pole double door IP-43 protection, powder coated, IK08 with provision of suitable size bus bar and cable management kit complete all as specified and directed. Make : Indoasian cat part No 811888 or eqlnt in Hager/Havells/Legrand

S & F in replacement MCB SP 6 to 32 Amps, 230 V AC complete all as specified and directed.

S & F in replacement MCB SPN 40 to 63 Amps, 230 V, AC complete all as specified and directed.

S & F in replacement MCB TPN 100 Amps, 415 V, AC complete all as specified and directed.

M&L for earthing complete with GI earth plate electrode 60x60cmx6mm thick burried directly in ground in earth pit not less than 2.25 mtr depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to & including GI lead 4 mm dia as earthing lead connecting to equipment by means of GI bolts & nuts etc with provision of charcoal and salt all around the earth plate all as per electrical plate No-3 of SSR part-I 2009 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork in any strata and testing on completion etc. including taking down old unserviceable earthing complete all as specified and directed by Engineer-in-charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep and making good surface for laying /removing of cable all as specified and directed by Engr in charge as in

Soft/loose soil

Hard/dense soil

Returning, filling in, excavated soil in trenches, watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removal of surplus excavated spoil to distance not exc. 50 metre and deposited where directed at a level not exceeding 1.5m above the starting point all as specified and directed

M & L for bituminous road cutting to a width of 45 cm and depth 50 cm for laying of pipe for laying of UG cables and making good with PCC (1:3:6) type C1 (using 20mm grade stone aggregate) all as specified and directed.

Supplying and laying GI tubing light grade of size 80mm dia bore for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works including taking down old one all as specified and directed.

Supplying and laying GI tubing light grade of size 50mm dia bore for encasing cables for mechanical protection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall/floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends/ sockets/ reducers/ saddles incl necessary threading/drilling works including taking down old one all as specified and directed by Engr-in-charge.

Supply, laying and testing cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminium conductor 1100 volts grade in trenches/ passing through pipe/fixing on walls, floors etc incl connection with proper sizes lugs and gland, suitable clamp of cross sectional area 3.5core 25 Sqmm in and including taking out old one all as specified and directed.

All as per item No.77 above, but of the size 3.5 core 50 Sqmm

All as per item No.77 above, but of the size 3.5 core 120 Sqmm

Supply & Laying of DWC (Double Wall corrugated) HDPE pipe ISI marked of outer dia of 120 mm and inner dia 103 mm polythylene with smooth internal and profiled external surface for non pressure under ground cable incl couplers & bends including taking down old one complete all as specified and directed.

Supply, install, connect, test and commissioning factory made, dust/vermin, weather proof self ventilated, cubical of size 1.5 x 0.50 x1.2 (Approx) with front made of and rear opening, hinged door for front,and rear with MS angle iron frame 50 x 50 x 5mm for base support, 3.15 mm thick CRCA sheet, LT panel board, (LT KIOSK), CPRI approved out door, cubicle type, floor mounted, double door with neoprene gasket and locking arrangement with canopy including painting with powder coated on steel surfaces internally & externally and provision of two Nos. earth terminals on both sides , cable glands and PCC foundation with PCC 1 : 2 : 4, type B1 , and 30 cm all around the outer dimension of panel including gap for insertion of cable having bottom of panel at height of 90 cms above the ground level with cable entry glands to accommodate and including the following accessories:-

Copper bus bar rectangular 400 Amps full for phase and half for neutral and interconnection of MCCBs to Bus bar mounted on epoxy insulators with colour coding PVC sleeves.-01 job

MCCB 200 Amps, TPN, 415 Volts, 50 Hz, 50 KA- 01 No. (Incoming)

MCCB 100 Amps, TPN, 415 Volts, 50 Hz ,36KA - 02 Nos. (Outgoing)

MCB TPN 63 Amps - 04 Nos. (Outgoing)

Change over 200 amps - 01 No.

MCB SPN 32/40A - Each-20

RYB LED Indicator Lamp- Set of Three-01

Provision of cubicle to accommodate the above mentioned accessories.

Internal wiring of panel board, metering equipment with suitable size PVC insulated, unsheathed, 1100 V grade cable with multistranded copper conductor, including provision of lugs/thimbles on either ends of cable.

M & L for earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms thick burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to galvanised iton strip of 25 x 4 mm as earthing lead by means of nuts, bolts and washers of steel after welding of GI strip to earth electrode to the full length of earth plate, 40 mm dia GI tubing light grade protection pipe upto test point, 20 mm dia GI watering pipe with funnel and wire mesh, PCC pit 1:3:6 with pit cover of size 30x30 CM made of RCC 1:3:6 with suitable handle, angle iron frame of angle iron size 40 x40x4mm, adequate qty of charcoal dust and salt layers all around the earth plate, including earth work and excavation in any type of soil, removal of surplus soil and returning filling in all as required at site all as specified in plate No 3 of SSR Part-I 2009 and directed by Engr-in-Charge including taking down old unserviceable earthing.

Supply, installation, commisioning and testing of water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity of 80 litre and nominal cooling capacity of 40 litres per hour. Make : Bluestar/ Voltas.

Supply & fix refrigerator, electric driven (single phase), capacity 320 litres BEE 5 star rated. Make: Whirlpool/ LG/ Samsung.

Supply, installation, commisioning of Glass Top deep freezer single phase 240 Volts, 50 Hz of capacity 320 litres and double door as specified and directed. Make : Bluestar/ Voltas.

Supply & fix desert cooler electric driven having nominal air flow capacity of 6000 cum per hour (or nearest size) Galvanised steel body, heavy duty trolley and wheels, ABS grill with auto swing, tank capacity min. 50 Ltrs, Honeycomb cooling media, cooling area min. 120 Sqft, 3 speed motor with min fan size 12" complete. Make: Baybreeze

Mukund Engineers and Contractors

vishalconstruction

ShreHari Civil Enginneering and Contractors