REPAIR TO CERTAIN INTERNAL ROADS OF CERTAIN UNIT UNDER AGE B/R-II AT GE KAMPTEE.

Amount

Material and labour Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal)but making good by applying tack coat @ 5 kg per 10 sq m with paving bitumen, putting in premixed bituminous asphaltic semi-dense concrete with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix rolled and compacted depth of potholes exc 30 mm using paving bitumen complete all as specified and as directed.

Material & Labour for preparing unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a tack coat with bituminous primer using paving bitumen @ 10 kg per 10 Sqm with bitumen grade VG-30 on unsurfaced water bound macadam using mechanical sprayer complete all as specified and as directed Note: The work shall be executed by using hot mix plant and mechanical sprayer.

Material and labour for premix bituminous macadam (consolidated thickness 75mm or less) with 4% binder content by weight of total mix (paving bitumen of grade VG-30), mixed in hot mixed plant and laid by using mechanical paver and rolled & compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed.

Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with mechanical equipments and clean the surface by using pressure air to remove all loose dirt etc., complete all as specified and as directed.

Material and labour for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 5 kg per 10 Sqm on existing black top surfaces/on existing surface before laying of Asphaltic semi dense concrete using mechanical sprayer complete all as specified and as directed.

Material and labour for premixed asphaltic dense concrete 30mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and as directed. Note: The work should be executed by using hot mix plant and mechanical paver.

Material and labour for painting lines, Dashes, Arrows, etc. By applying 2.5 mm thick THERMO PLASTIC ROAD MARKING COMPOUND of white / Yellow of approved make and shade for road marking not exceeding 10 cm width on bitumenous roads/ pavements or on cement concrete surfaces using HOT PROCESSOR PLANT all as specified and as directed / as per manufacturer instruction.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.

Material and labour for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded aggregate as in sub base of floor, complete all as specified and directed.

Material and labour for PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate), as in side stops of paver blocks / roof kerbs or mud stops, round or chamfered on edges and finishing surfaces even & fair, complete all as specified and as directed.

Material and labour for 60mm thick, rubber finish on top, M-40 grade, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 laid over 30mm thick stone dust screed/cushion, with grey cement and pigment complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

Material and labour for Brick work with flyash bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering 15 mm thick in CM 1:6 on fair faces of brick masonry or concrete surfaces, finished even & smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new surfaces of walls & applying two coats of cement base paint over a coat of white wash of approved make complete all as specified and as directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 1,200.00/- ]

SRI JD CORPORATION

Meet Road Lines

Bidder Name

Meet Road Lines

SRI JD CORPORATION

VIJ ASSOCIATES