Supply of Laboratory Equipments

Amount

Part-A

Name of Product : Ph meter 5 point calibration, Specification : PH • Range : 0 to 14 ph • Resolution : 0.001ph • Stability : 0.002 ph per hour , • Relative Accuracy : pus or minus 0.002 ph plus or minus Digit • Slope 85% to 115% • Standard Buffer : 1.679 , 4.004 , 7.000 , 9.183 , 12.454 Acceptable • Buffer Deviation : plus or minus 0.5 ph • Other working buffers : 0 to 14 ph (value entered through numerical keys ) MV • Range : 0 to plus or minus 1999.9mv , • Resolution : 0.1mv • Accuracy : plus or minus 0.5 mv plus or minus 1 digit or plus or minus 0.05% of reading • Temperature = • Compensation : Auto/Manual • Range : 0 too 99°C • Display : 2 line , 20 - character Alphanumeric LCD• Annuciation : Individual LED with keys for calibration PH , ABS mV , REL mv and Print • Data Storage : 80 readings • Printer port : Epson compatible 80 column Dot matrix • Power : 230VAC plus or minus 10% , 50 HZ • Dimension : 250(W) x 205(D) x 75 (H) mm • Weight : 1.25 kg approx

Name of Product : Flame Phototmeter with PC Link Software, Specification : • Micro controller based automation for ease operation • Determination up to four elements with single aspiration (Na,K,Li & Ca) • Curve Fitting correction for non linear emisiion characteristics of elements at higher concentration , maximum five point calibration • Storing Facility for setups and results (date wise & batch wise , maximum 700 results ) the same can be recalled whenever need arise . • 4 line 20 character LCD readout • Facility for restandardization with single standard • Built in real time clock for date and time analysis • Printout facility for individual sample , batch sample , total days samples or entire results in the memory (700 max ) • Air compressor with built in air regulator and air Filter • Pc link Software for transferring data to computer and manipulation of data in computer using RS-232. • Reproducibility : : low conc : plus or minus 1% fs , High conc : plus or minus 2% Fs. • Minimum Smaple : 3ml / element (Approx) • Averaging Time : 2 to 15 seconds • Operating Air Pressure : 0.45 kg/cm square • Air Compressor : With Built in air regulator and air filter to deliver stable and moisture oil free supply with pressure of 1 kg/cm sqaure. • Printer Port : Epson compatible 80 column DM printer • RS-232 Port : PC Link data Transfer • Memory : Storage 700 results • Power : 230V plus or minus 10% , 50 Hz • Dimensions : 415 (W) x 255 (D) X 305 (H) mm (Main Unit) , 255 (W) x 210 (D) x 205(H) mm ( Compressor ) • Weight : Main Unit 6.5 Kg + Compressor 6 Kg • This instrument is supplied with PC Link SOftware

Name of Product : Hot Air Oven 16x16x28 inch 300°C, Specification : Size Dimension : 16 inch x 16 inch x 28 inch • Rating Watts : 2000 • No of shelves : 3 • Hot Air Ovenare sturdy double walled Units. •Inner Chambers Made of Stainless Steel and Outer Made of Mild Steel with Powder Coating . •Gap Between the walls fitted with Glass wool Insulation to avoid heat losses. •Heating Elements are made of High Grade Chrome plated nichrome Wire. •Temperature is controlled by Thermostat. •Temp Range 50°C to 300°C and Accuracy plus or minus 2°C (with Digital accuracy plus or minus 1°C). •Air Ventilation is provided on the top of the Unit to Remove the Hot Gases/Fumes. In Lab Type Oven Heater are placed in the bottom side of the Unit . •All the control Switches and Pilot lamps are fitted on the Front Panel.•Trays should be supplied with GI Wire mesh with Digital Temperature indicator cum controller and with Digital Timer .

Plant sample grinder flash

Name of Product : Shaker 15 Kg, Specification : • Platform Specification : Mix, Blend,or agitate substances in flasks & tubes with Veriable attachments • Motor Function : Brushless DC Motor for longlife and maintainance free operation Last run memory feature allows easy repeatability in tests. • Display : LED Display for Speed and Time adjustment. • Technical Specification : Program mode allows one to set CW,CCW, Speed, Time, Dwell Time, Sequence and Loop . • Operation : Each Program has 9 sub-programs can have different time and speed adjustments. • Looping of sub programs can be done by loop button.• With Instruments available Universal Attachment - You Can Put in that - 15Kg - 100ml x 44no, 250ml x 36no, 500ml x 25no, 1000ml x 13no. • Type of Movement : Orbital / Linear . Orbital Diameter in mm : 30,40,40,60,70. • Speed range in rpm : 30 to 300 rpm . • Motor Type : BLDC • Display : Digital. • Run Time : upto 99 hours 59 mins . • Dimension : 825x625x165

Name of Product : All Quartz Double Distillation Unit 2.5 Ltr/hr with Distillation Apparatus power supply, Specification : • Unit Consisit of Primary boiler with built in heater. Primary Boiler has ‘O’ Ring groove at the top on which a Silicone ‘O’ Ring sits. The primary Boiler is being provided with ‘O’ Ring which acts as cushion on which Secondary Boiler and Condenser Unit is mounted. • The Secondry Boiler with Condenser is Mounted on the primary Boiler. • The cooling water inlet and outlet are both at the top for easy maintenance • A Double wall Condenser ensures separate condensation of vapor coming from the two Boilers using single cooling circuit. • An Additional Cooling Column provides larger cooling surface area for primary Boiler avoiding uncondensed steam escaping at the top. • DAPS ( Auto cut off system ) has a Reset button and a buzzer. • We provide 10 mtrs of 10mm id x 14mm Silicon tubing-- 10 meters with each unit • The bottom outlet is connected to a ‘T’ joint of which limb is connected by rubber tubing &amp; pinch cock for cleaning sediments in Primary Boiler by acid wash and other limb to the water. • Dimension : Lenght : 35 cm , Breadth : 35 cm and Height : 100 cm . • Distillation water output capacity : 2.5 Ltr/hr . • Total Power consumed (kw) : 4.4 • Condutivity (S/cm) : <1x10-6 • Voltage (V) : 230-250V • Biological Activity : Pyrogen free • Boiler : Quartz • Condensor : Quartz with Distillation Apparatus power supply 2.5 ltr

Name of Product : Precision balance internal calibration, Specification : Maximum : 220 gm , Minimum : 0.001 gm , Internal Calibration , Pan Size : 110 mm

Name of Product : Analytical Balance internal calibration Specification : Maximum : 220 gm , Minimum : 0.1 mg , Internal Calibration , Pan Size : 90 mm

Name of Product : Computer printer with UPS

Name of Product : Digital Hot plate ceramic plate 500°C, Specification : • Dimension : 18x18 cm • Material/Set up plate : Ceramic • Temperature Range : 50°-500°C • Maximum Load : 11 Kg • Dimension : 32x24x12 cm • Vac : 240 • Hz : 50 • Amps : 4.6 • Watts : 1100 • with SS suport rod , Boss head clamp , Clamping Rod . This instrument also comes 2 probes that is External Probe 6 " and External Probe 8" .

Name of Product : Rapid Heating Furnance 24 inch x 16 inch x 24 inch, Specification : • lt ls Light Weight And Fast Heating Equipment. • Most Useful Fon Ashing, Fasions, lgniting And Heat Treating Of Small parts In Chemrcat, Industnial Fields, Colleges. •Out Side Body Made Up Of Heavy Gauge G.l. Duly Powder Coated Inner Muffle With High Temp. Insulating Material • Maximum Temperatures 1150°C & Working Temperature 110°C •Temp. controlled By Digital remperatune controllen cum Indicator. •Heating Elements Made of Kenthal Wire would Extremely on The Muffle. •control Panel Fitted on Top of the units With Indicating Lamps & switches •A Uniform Heat Distribution Through All 4 sides with Kental wire. •A Special Solid State Silver Fuse Fon Protection To Elements In Case Of Over Heating. • Operates On 23O Volts A.c Only. • Dimension : 24 inch x 16 inch x 24 inch • Ratting Watts : 2500

Name of Product : BOD Incubator 45 cm x 50 cm x 65 cm, Specification : • Construction : Double walled Construction Outer Body made of Mild steel powder Coated & Inner body made of stainless steel. • Insulation : Puff Insulation between two walled • Temp Range : 5°C to 60°C. deg • Temp Accuracy : +/- 0.5°C. deg • Temp controlled by : PID Micro process controller with dual display to view set & Current temp. • Air circulation By : Air circulation fan motor with blower to maintain uniform temp Motor of 1/12 HP 1440 RPM • Door : Inner Acrylic door to view sample & outer metal door powder coated . • Gasket : Magnetic Gasket for door. • Cooling System : By thematically sealed compressor kirlosker make with CFC free Gas. • Wheel: Castor wheel in bottom for easy movably.• Dimension : 45cm x 50cm x 60 cm • No of shelves : 2 • Inner body : Stainless Steel • with voltage stabilizer.

Name of Product : Cetrifuge Machine 16000 rpm maximum 300 ml capacity, Specification : • Automatic rotor detection, check of presence of accessories and compatibility with maximum speed • Safety speed limiter function • 10 storable programs with protection function • Setting of speed in RPM and RCF • Controlled by microprocessor and backlit color LCD display with contemporary visualization of all parameters • Digital adjustment of acceleration and deceleration levels • Stainless steel internal bowl with optimal height for loading and unloading of samples • Imbalance detection system with automatic functioning stop to avoid accidents • Automatic locking system of the lid • Safety opening of the lid in case of absence of electric power • Brushless motor maintenance free and no carbon deposits • Construction in accordance with European directives • Maximum capacity : 6 x 50 ml (fixed angle) • Maximum rpm : 16000 • Maximum RCF : 21000 g • Max. Tube size : 50 ml • Maximum Capacity : 300 • No of Programs : 10 • Setting RPM : Yes • Setting RCF : Yes • Display RCF : yes • Timer : 00.30 to 99.50 (mm:ss) and continiuos mode • Date and Time : yes • Accelearation level : 0 to 9 (0= min and 9 = max) • Decelearation level : 0 to 9 (0= min and 9 = max) • Spin function : yes • Programs : 10 programs with protection function • Indication of rotor: Yes • Noise : less then or equal to 55 db • Directive/standard : IEC 61010-2-020 • External Dimension : 450 x 590 x 330 mm • Weight : 40 Kg • Supply: 220-240 Volts, 50 Hz Single Phase •This instrument should be supplied with 6 x 50ml Angle rotor for 50ml tubes.

SCIENTIFIC CORPORATION

Kalash Enterprises

DODAL ENTERPRISES

Trident Equipments Pvt Ltd