PROVN OF HARD STANDING IN MAIN MT LOCATION FOR PARKING OF DDV OF MED REGT AND ADDN/ ALTN OF EXCHANGE ROOM AT COMN COMPLEX OF INF BDE SIG COY UNDER ZONE-III AREA AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

JOB NO : 06/LBW/61SA/23-24/Q3W Surface excavation n.exc 30 cm deep and averaging 18 cm deep and getting out soft /loose soil complete as specified and as directed.

M&L of Hardcore (broken stone) of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete as specified and as directed.

M&L Cement concrete in foundations, type D- 2, 1:4:8 (40mm graded stone aggregate) filling and mass concrete as in flooring complete as specified and as directed.

M&L for 100 mm thick of Cement concrete type B- 1, 1:2:4 (20 mm graded aggregate) finished even & fair without using extra cement & concrete laid in pannels complete all as specified and as directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as direccted.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil complete as specified and as directed.

Demolition of unreinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete as specified and as directed. 06/LBW/61 SA/23-24/Q3W : 7.80 20/Min/61 SA/23-24/Q3W : 2.40

Formwork (flat) to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter rough finished surface of concrete complete as specified and as directed.

M&L Cement concrete in surface channels and drains Type C2 1:2:4 (40 mm graded stone aggregate) complete as specified and as directed.

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm inner girth in cement concrete using extra cement including forms, mould mitered stopped ends etc complete as specified and as directed.

Forming 20mm thick and 100mm deep Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A' for 100 mm thick concrete slab complete as specified and as directed.

M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade 'A' complete as specified and as directed.

JOB NO : 20/MIN/61SA/Q3W/2023-24: Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and painted in any mortar complete as specified and as directed.

S&F light shade Vetrified Ceramic tiles joint free ,edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) finished fair and even complete as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 15 mm thick Screed bed in CM (1:6) complete as specified and as directed.

M&L for preparing of old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synethic enamel paint on wooden surfaces all as specified and as directd by Engineer-in-Charge

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified and as directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete as specified and as directed.

S&F 25mm dia with well thickness 1mm curtain rails,anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers of suitable size etc. fixed in repair complete as specified and as directed.

S & F length of latch 100mm Mortice latch with two levers (vertical Type), brass body and fixed in repairs complete all as specified and as directed.

M&L Aluminium Powder coated (minimum thickness of Powder Coating 50 micron) frame for door/ partition wall etc , and fixed frame etc with aluminium section weighing. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etcand beading for fixing of galvanised wire wire mess complete all as specified and as directed.

M & L powder coated (minimum thickness 50 micron) Anodised aluminium door shutters aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. complete as specified and as directed.

S&F Sheet glass, 6.30 mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete as specified and as directed.

S&F Providing /fabricating /assembleing and fixing anodized aluminium fixed partion using Jindal make or any other equivalent make as per Appx 'B' medium weight aluminium section as follow :- Horizontal members size 63.50 x 38.10 mm at 0.75kg// c/c spacing shall not exceed 90cm vertical members size 63.50 x 38.10 mm at 0.75kg/m c/c spacing shall not be more tha 90cm/bottom portion 3" height portion - Novopan prelaminated board 12mm thick including necessary clips, rubber beading Aluminium beading and fixing to the adjoing /existing wall/portion beading etc . Top portion 5mm thick plain glass /grounded glass with all necessary fittings/fixture etc complete as per sample & complete all as specified.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Providing and fixing suspended false ceiling (make Armstong ORCAL or equivalent as approved make as per Appx'B') extra microperforation size of 600 x 600 x 15 mm Ceiling Tiles over suspension metal system (MICRO LOOK) designer grid (15 mm grid 8mm return) SILHOUETTE X L 15 MM (NOMINAL) of Armstorng make complete (or equivalent brand of make specified in Appx 'B') including necessary hanging system arrangement which is required to be made over existing RCC roof /stone /slab /ac sheet of existing ceiling complete all as specified and as directed.

S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Stuck to 2 mm thick Plain colour PVC sheet duly fitted to wall inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete as specified and as directed.

S&F over all length of cover plate 140 mm Floor door stopper of aluminium brass body and tongue, anodised, with hard drawn steel spring, fixed in floor complete as specified and as directed.

M&L 100 mm thick PCC type C-2 (1:3:6) using 20mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection complete as specified and as directed.

M&L for preparation of old plastered surfaces and applying two coats of Oil bound distemper of approved shade/tint over and incl 1mm thick wall care putty on walls all as specified & directed by Engineer-in-Charge

M&L for two coats of white wash old plastered surfaces of approved shade/tint over and incl 1mm thick wall care putty on ceiling including preparation of surfaces.

Demolition of Cement concrete (unreinforced) Roofs, floors (other than ground floors), beams, staircases, landing chajjas and similar suspended work complete as specified and as directed.

M&L on floor roof Cement concrete 40mm thick type B-0, 1:2:4 (12.5mm graded aggregate) complete as specified and as directed. Note : Item will be executed after complete removal of existing roof treatment and losse particle and disposed off the rubbish outside the defence land.

Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks . (b) Cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authenticated applicator carefully by following manufacturer's instructions. (c) After drying one coat of roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat . (d) Necessary gurantee for 5 years shall be submitted by the contractor. Make: Berger Paints (Damp shield elasto) or equilent of other make/brand viz Sika/ Asian Paints (Except Smart care Damp Proof)/ IWL/

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed/ pvcconduit 20 mm dia medium grade with all accessories ISI marked, including Modular sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings

One light/fan/ bell point controlled by one, one way switch.

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board with other switches.

All as per Item No 36 above but with 2.5Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly, complete all as specified and as directed.

All as per Item No 36 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly, complete all as specified and as directed.

S&F switch, piano type 230/250 volts, complete all as specified and as directed.

Modular Single pole, one way 5 Amp rating

Modular Single pole, one way 15 Amp rating

Supply and fixing of stepped modular type electronic fan regulator flush type on the existing phenolic laminated sheet etc., complete all as specified and as directed.

S&F Socket, piano type 230/250 volts , complete all as specified and as directed.

Modular Socket 05 Amp rating

Modular Socket 15 Amp rating

Supply, fixing and installation of Wall Split units indoor/ outdoor 2 TR with cordless remote control unit AC with 5 Star rating inverter based (make : Blue star IA524DNU 2 Ton 5 Star inverter Split AC), EER comprising star rating of Jan 2012 to 31 Dec 2023 or equivelent make as per Appx 'B' complete all as specified and as directed.

Supply & fix LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and as directed.

S&F factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar , complete all as specified and as directed.

S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps

SPN 32 to 63 amps.

S&F Ceiling fan of 1200 MM sweep BEE 5 star marking with complete fitting complete 230V, AC as directed by Engr-in Charge

S&F Voltage stabilizer for automatic operation, single phase naturally cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stablilizerd at 230 V with accuracy of (+-) 2.5% and capacity 5 KVA complete all as specified and as directed.

M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit/casing capping and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 6 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity, complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc , complete all as specified and as directed. ( Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt, complete all as specified and as directed.

KARNI CONSTRUCTION COMPANY

Shiv Construction Company

ANKIT BUILDERS

PUSHPA G ENTERPRISES

RAMJI LAL & SONS

MSR INFRATECH