Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC ROOM NO A 46 GALI NO 11 GANESH MURTHY NAGAR PART NO 3 CAPT PRAKASH PETHE MARG CUFFE PARADE COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹9.9 L+₹1.5 L (18.3%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹10.3 L+₹1.9 L (22.9%)Rejected-Finance | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹10.9 L+₹2.5 L (30.1%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹11.4 L+₹3.0 L (35.1%)Rejected-Finance NOT AVAILABLE | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹29,000
Closing Date
25 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
ADDITIONS/ALTERATION OF EXISTING BUILDING P-73 FOR CREATING INFRASTRUCTURE FOR PEDIATRIC DENTAL SEDATION CLINIC WITH PLAY AREA AS AN EXTENSION OF THE EARLY INTERVENTION CENTRE AT INDC DANTESHWARI UNDER AGE (I) ASVINI, COLABA MUMBAI
2023_MES_624507_1
8032/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
AGE (I) Asvini
Class E
Category a(i)
7 documents required · 7 mandatory
₹500
Yes
AGE (I) Asvini
₹29,000
Yes
6 Jan 2024
21 Oct 2023
27 Nov 2023
21 Oct 2023
25 Nov 2023
11 Nov 2023
21 Oct 2023 - 2 Nov 2023
Amount
Demolition of brickwork/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles including removing debris outside MoD land complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for including removing debris outside MoD land complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for including removing debris outside MoD land complete all as specified and directed by Engr-in-charge.
Material & labour for Anti-skid vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-charge..
Supply & fixing 12mm thick toughened glass door make of modiguard, double/single shutter, including SS pivot of floor door closer, SS corner support, SS handle 600mm long fixed at both sides of both/single shutter and also including necessary SS accessories, like clamps locking arrangements etc complete all as specified and directed by Engr-in-charge. Note:- The glass of door will be scattered type and will not be visible through glass from both side.
Supply & fixing double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr-in-charge
Taking down cement plastering on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including removing debris outside MoD land complete all as specified and directed by Engr-in-charge.
Material & labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete work complete all as specified and directed by Engr-in-charge.
Material & labour for cement concrete in sub-floors, sub-bases, floors and pavings etc type B-1, 1:2:4, (20 mm graded crushed stone aggregate), 55mm thick complete all as specified and directed by Engr-in-charge.
Taking up or down steel tubing and connections of 15mm bore complete all as specified and directed by Engr-in-charge.
Taking up or down steel tubing and connections of 20mm bore complete all as specified and directed by Engr-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding including removing debris outside MoD land complete all as specified and directed to Engr-in-charge.
Supply & fixing steel water tubing of 15mm dia medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors in fair cutting grooves in brickwork etc complete all as specified and directed by Engr-in-charge.
Supply & fixing steel water tubing of 20mm dia medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors in fair cutting grooves in brickwork etc complete all as specified and directed by Engr-in-charge.
Material & labour for glazed ceramic tiles in vertical surfaces 450 X 300 X 7mm thick set and jointed in neat cement paste and pointed in white or coloured cement to matchlaid over and including 15 mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-charge.
Material & labour for painting walls with texture colours according to children aesthetics complete all as specified and directed by Engr-in-charge.
Material & labour for preparing surfaces plastered or unplastered on walls and priming surfaces with chalk whiting, on plastered surfaces, preparatory to distempering and applying two coat of distemper oil emulsion, white or tinted complete all as specified and directed by Engr-in-charge.
Supply & fixing plain aluminium ceiling system consisting of 600mm x 600mm pre coated aluminium tiles of 0.7mm thickness of white colour laid over and including GI powder coated grid system consisting of 15mm wide Tee section flanges in white colour having rotary stiching on the main runner, 1200mm x 600mm cross Tee with a web height of 32mm, perimeter wall angles of size 19 x 19mm secured to walls at 450mm c/c with cadmimum plated screws including necessary fitting and 4mm GI suspenders fixed to slab using anchor fastener in ceiling of length as required on site complete as per manufacturer instructions complete all as specified and directed by Engr-in-charge. (i) The rates includes for necessary hanging wire minimum having 3mm dia ,cutting in false ceiling for fixing electrical fittings, fire sensors etc and making electrical connection complete.
Material & labour for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engr-in-charge.
Material & labour for machine cut cudappah stone slab 20-25 mm thick laid in platform for WHB fixed or jointed to brick support complete all as specified and directed by Engr-in-charge.
Material & labour for laying granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and laid over cuddappah stone with 15mm screed bed in CM 1:4 for platform to WHB/sink etc complete all as specified and directed by Engr-in-charge.
Supply & fixing 4.80mm thick sheet glass ordinary quality and glazing with aluminium beading and rubber etc in square n exc 0.50 sqm in each pane complete all as specified and directed by Engr-in-charge.
Supply & fixing 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot and cold with long screwed shanks and fly nuts, fancy type screwed for iron/pvc/ppr pipes and fixed complete all as specified and directed by Engr-in-charge.
Supply & fixing 15mm bore Self-closing taps with elbow wrist operated long, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge.
Supply & fixing sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charge.
Supply & fixing Vitreous China wash basin, white, flat back, size 580x450mm (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed by Engr-in-charge.
Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) complete all as specified and directed by Engr-in-charge. (A) Area not exceeding 2.00 sqm each
Supply & fixing waste coupling of PTMT (half or full threaded)(minimum weight 32mm-45gms/40mm-60gms, for WHB bore of discharge pipe 32 mm complete all as specified and directed by Engr-in-charge.
Supply & fixing waste pipe for WHB/urinals 32mm dia including all fitting complete all as specified and directed by Engr-in-charge.
Supply & fixing tubular towel rail , aluminium anodised 20mm dia, D type 60cm long between flanges complete all as specified and directed by Engr-in-charge.
Supply & fixing grating doom 100mm dia of PTMT with hole for passing waste pipe (minimum wt 25 gms) complete all as specified and directed by Engr-in-charge.
Supply & fixing 15mm bore 'fancy type' (chromium plated with long shank and cup (concealed type)) stop valve (one way/two way/ three way) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-charge.
Supply & fixing 15mm bore stainless steel braided hose 60cm long with connections complete all as specified and directed by Engr-in-charge.
Supply & fixing 110mm PVC (SWR) couplers complete all as specified and directed by Engr-in-charge.
Supply & fixing 110mm bore PVC (SWR) bends any radius complete all as specified and directed by Engr-in-charge.
Supply & fixing 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
Material & labour for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed by Engr-in-charge.
Material & labour for excavating in post holes (or similiar holes) each n exc 0.5 cum, getting out, returining fillling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil complete all as specified and directed
Material & labour mild steel for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks(stays), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hold fasts; wall ties; hooks for hangings fans complete all as specified and directed.
Supply & fixing 80mm nominal bore, steel tubes for structural purposes as in columns, main or cross beams, hip & jack rafters; purlins where connected to common rafters; fixed with angle cleats or other connecting plates, conforming to IS:1161-1979, complete all as specified and directed.
Supply & fixing rolled mild steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade ST 240 complete all as specified and directed by Engr-in-charge.
Supply & fixing 8 to 10mm thick rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment also fixing with fabrication/ welding etc.of Gde Fe410 complete all as specified and directed by Engr-in-charge.
Supply & fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ Cladding to wall, fixed with self taping screws complete all as specified and directed by Engr-in-charge.
Material and labour for applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as specified and directed by Engr-in-charge.
Supply, Hoisting and fixing 2000 ltrs rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engr-in-charge.
Supply & fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing complete all as specified and directed by Engr-in-charge.
Material & labour for cement concrete Type C2 1:3:6 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.
Material & labour of point wiring with two run of PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm (Red and Black colour), 1100 volts grade cable, FRLS, passing through PVC casing caping 25/32mm including accessories and Supply & fixing PVC modular metal flush box with modular white cover plate with frame, suitable for mounting modular fittings like switches, switch socket, fan regulator etc as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) FRLS earth wire and connected to earth dolly complete all as specified and directed by Engr-in-charge for the following:-
One light point controlled by one way switch.
One fan point controlled by one way switch with fan regulator.
One 3 pin socket outlet, 5 Amps on the Independent board.
Ditto All as per item No 50.00 above but with 4.0 sqmm cable for one 3 pin socket outlet 15 Amps on the independent board complete all as specified and directed by Engr-in-charge.
Supply & fixing ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed by Engr-in-charge.
Supply and fixing modular switch, 1 way 6 Amp, 1 module complete all as specified and directed by Engr-in-charge.
Supply & fixing modular socket 6Amp, 2/3 pin, combined 2 module complete all as specified and directed by Engr-in-charge.
Supply & fixing modular socket 6A/16A, 2/3 pin combined 2 module complete all as specified and directed by Engr-in-charge.
Supply & Fixing modular switch, 1 way 16 Amp, 1 module complete all as specified and directed.
Supply & fixing MCB Triple Pole and Neutral sheet metal enclosure, double door DB 4 Way (4+12) with 200 Amps rated bus bar for each phase, 415 volts, complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge.
Supply & fixing 415 Volts, 10 KA, "C" curve miniature circuit breaker (MCB) of TPN 40 to100 Amp current carrying capacity in the DB complete with the connection testing and commisioning complete all as specified and directed by Engr-in-charge.
Supply & fixing 240 Volts, 10 KA, "C" curve miniature circuit breaker (MCB) of SP upto 32 Amp current carrying capacity in the MCB DB complete with the connection testing and commisioning, complete all as specified and directed by Engr-in-charge.
Supply & fixing of 240 Volts, 10 KA, "C" curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp current carrying capacity in the MCB DB complete with the connection testing and commisioning, complete all as specified and directed by Engr-in-charge.
Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cables of suitable size complete all as specified and directed by Engr-in-charge.
Material & labour of sub main wiring in surface/ recessed as site required with two single core PVC insulated unsheathed FRLS copper conductor 1100 volt grade multistandard of size 4.0 sqmm drawn through and including PVC casing capping 25x12mm/32x12mm including accesssories (ISI marks) one run of 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly, taking down old submain wiring complete and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge. Note:- One run of PVC casing capping 25x12mm/32x12mm, two run of 4 sq mm copper conductor & one run of 4.0 sq mm copper conductor cable for earth will be measured as one unit.
Supply laying,commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 50 sqmm x 3.5 core laid in ducts, passing through pipes, fixed on walls complete including connecting properly by means of clamps, thimbles and taking out old u/s damaged cables complete all as specified and directed by Engr-in-charge.
Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out complete all as specified and directed by Engineer-in-Charge. Note : Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cables .
Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed by Engr-in-charge.
Removing excavated material from the site of work to outside MoD land complete all as specified and directed by Engr-in-charge.
Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I complete all as specified and directed by Engr-in-charge. Note :- Only compacted thickness of sand will be measured and paid
Supply and laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mm x 150 mmx 40 mm complete all as specified and directed by Engr-in-charge.
Cutting existing road surfaces or hard standing 0.45 mtr depth (22 thick comprising bituminuous topping) for laying of pipes/cables and making good disturbed surfaces to match with existing surfaces complete all as specified and directed by Engr-in-charge.
Material & labour for PCC 1:2:4 type B2 (using 40 mm graded crushed stone aggregate) for road/Hard standing complete all as specified and directed by Engr-in-charge.
Material & labour for PCC 1:2:4, type B1 (using 20 mm graded crushed stone aggregate) as in coping for steel pole including necessary formwork complete all as specified and directed by Engr-in-charge.
Supply and fixing replacement 50mm bore High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface after taking out old pipe complete all as specified and directed by Engr-in-charge.
Dismantling of old unserviceable/broken LT PCC poles complete with foundation (8.5 metre Long) including taking down foundation of pole or digging complete all as specified and directed by Engineer -in-Charge.
Taking down old unserviceable LT feeder pillar box including MCCB, and other accessories complete all as specified and directed by Engineer -in-Charge.
Supply and fixing wall mounted fans with complete accessories , 230 volts, 50 Hz,400 mm sweep ,110 W speed 2050 RPM minimum air delivery 90 CFM, including connecting up with three core flexible copper conductor cable for suitable size Complete all as specified and as directed. Make:Bajaj SKU Code 250552 ESTEEM 400 MM WALL FAN DOUBLE STRING or as approved by GE
Material & labour for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 metre below normal ground level connected to GI earth strip 25 x 4mm by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover slab including 10 mm dia TMT bars at 100 mm spacing c/c both ways including watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal including necessary excavation earth work in any type of soil outside MoD land complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs 25 mm x 4mm galvanised iron strip Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc complete all as specified and directed by Engr-in-charge.
Supply & fixing test point terminal block for connecting the earth pit and down conductor or Aluminium strip, made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hex head screw after taking out old/unserviceable terminal block complete all as specified and directed by Engineer-in-Charge.
Supply, Installing, Testing & commissioning of Hi wall split units Indoor/Outdoor complete with cordless remote control unit & with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating & EER 3.2 capacity 1.5 TR complete all as specified and directed by Engr-in-charge.
Supply, Installing, Testing & commissioning of Hi wall split units Indoor/Outdoor complete with cordless remote control unit & with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating & EER 3.2 capacity 1.0 TR complete all as specified and directed by Engr-in-charge.
Supply & Fixing sheet metal enclosures single pole and neutral enclosure with a two pin and earth plug and socket complete with one MCB SP 20 Amps complete all as specified and directed by Engr-in-charge.
Ditto All as per item No 50.00 above but with 2.5 sqmm multistranded copper conductor cable for mounting metal clad power socket on independent board including one run of PVC unsheathed multistranded copper conductor cable 2.5sqmm earth continuity conductor complete all as specified and directed by Engr-in-Charge.
Supply & fixing angle iron stand for fixing of outdoor unit including fixing arrangement complete all as specified directed by Engr-in-Charge.
Unitech Enterprises
SAI SIDDHI CONSTRUCTION
SHRI SAI ENTERPRISES
SHREE JAGDISH FURNITURE CO.
satguruenterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .