REPAIR REPLACEMENT TO ROOF COVERING FALSE CEILING WALL PANELING FLOORING PLINTH PROTECTION PLASTERING AND OTHER CONNECTED WORK IN OTM ACCN IN THE AREA OF AGE BR I UNDER GE WEST DELHI CANTT 10

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets/ridges in roof coverings and removing rubbish beyond MOD Land complete all as specified and directed .

M&L for 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L-type or J-type or cranked hook bolts complete all as specified and directed .

Refixing of serviceable asbestos cement corrugated or semi corrugated sheets obtained from dismantling in roofs, wall etc fixed with 'L' type of 'J' type or crancked hook bolts at same or other bldg complete all as specified and directed .

M&L for 6mm thick asbestos cement two piece adjustable serrated ridge suitable for corrugated or semi-corrugated AC sheets fixed with 'L'-type or 'J'-type or cranked hook bolts complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour having tensile strerngth of 550Mpa as in roof covering, fixed with self tapping screws complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coated GI based plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof ridge covering, fixed with self tapping screws by providing proper notch/cut in the pattern of corrugated roof sheeting to cover up the gaps of corrugation complete all as specified and directed .

Dismantling of wall and ceiling boards any type (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, incl cover fillets and frame work and removing rubbish beyond MOD land complete all as specified and directed .

S&F false ceiling with GI main snap grid of size 600x600mm using main Tee of size 24x28x.40mm prepunched to accept cross Tee of size 24x28x0.40mm and wall angle of size 25x25x0.40mm fixed with wall around of size with and incl 4mm thick plain fibre cement board coloured designer tiles of size 595x595mm placed in the grid and held in position duly suspended by 4mm dia GI wire hanger from the roof with holding down clips, butter fly clips and necessary provision for light fiture etc complete all as per manufactures instruction complete all as specified and directed .

Refixing/resecuring of false Ceiling board and snap grid frame work including providing 4mm dia GI wire as in hanger complete all as specified and directed .

S&F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing to wall to make PVC frame complete all as specified and directed .

S&F for solid PVC wall lining/penelling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and PVC angle as reqd at corner/door jamb and fixing at site on PVC frame as per complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish beyond MOD land omplete all as specified and directed .

M&L for Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed .

M&L Non-skid coloured ceramic tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

M&L for non skid coloured ceramic tiles 6-7mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc, set jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed .

S&F vitrified ceramic coloured tiles 8 -10mm thick light shade single charged (square/ rectangular) polished, area of each tiles exc 0.36 sqm but nexc 0.42 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed .

S&F vitrified ceramic coloured tiles 8 -10mm thick Dark shade single charged (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all as specified and directed .

M&L for 10 mm thick Screed bed or bedding/backing layer mortar in cement mortar 1:4 on vertical surfaces complete all as specified and directed .

M&L for Glazed ceramic tiles in vertical surface, 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.18 sqm, in patch work set and jointed in neat cement slurry and pointed in white or colour cement to match Coloured tiles complete all as specified and directed .

M&L for Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed .

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed .

M&L for Machine cut kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado and pillar over bedding layer of mortar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed .

Taking down cement plaster any description on brick or stone walls and ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc. removing the rubbish beyond MOD land complete all as specified and directed .

M & L Rendering 15mm thick in Ready Mix Mortar having ratio equivalent to CM (1:4) on brick work or concrete surfaces of wall and finished even and smooth without using extra cement as a whole or in patch work as per manufacturer instruction complete all as specified and directed . Make : SIKA/ Dr Fixit/Ascolite or equivalent as approved by GE.

M & L Rendering 15mm thick in Ready Mix Mortar having ratio equivalent to CM (1:6) on brick work or concrete surfaces of wall and finished even and smooth without using extra cement as a whole or in patch work as per manufacturer instruction complete all as specified and directed . Make : SIKA/ Dr Fixit/Ascolite or equivalent as approved by GE.

M & L Rendering 10mm thick in Ready Mix Mortar having ratio equivalent to CM (1:3) on concrete surfaces of Ceiling and finished even and smooth without using extra cement as a whole or in patch work per manufacturer instruction complete all as specified and directed . Make : SIKA/ Dr Fixit/Ascolite or equivalent as approved by GE.

M&L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces of wall and finishing the surface even and fair complete all as specified and directed .

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces of wall and finishing the surface even and fair complete all as specified and directed .

M&L for Rough cast plaster, applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick while it is still in plastic state the roughcast mixture consisting of crushed stone of size between 6 to 12 mm mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete all as specified and directed .

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement based paint white or tinted ,complete all as specified and directed .

M&L for Preparation of new rough cast plastered surfaces of wall and applying two coats of cement based paint white or tinted ,complete all as specified and directed .

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two cots of white lime wash, complete all as specified and directed .

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two cots of colour wash, complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer the wall surfaces complete all as specified and directed .

M&L for Preparation of new surfaces (Plastered or un-plastered) on ceiling and applying two coats of white lime wash, complete all as specified and directed .

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish beyond MOD land complete all as specified and directed .

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded agg) for plinth protection laid in bays and finished even & smooth & fair including filling the joint with bitumen mastic(1:1) complete all as specified and directed .

S&F for mild steel work in wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed .

M&L for preparation of new steel or iron surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for one coats of synethetic enamel paint(ordinary tint) including preparation of old steel surfaces of any description,over 10cm in width or girth,not otherwise described complete all as specified and directed .

Deduct Credit: for demolished/dismantled material of (-) Rs 61700.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

B. S BUILDERS

JAIPAL AND BROTHERS

cuckoo enterprises

Usha Contractors and Engineers