Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.8 CrAccepted-AOC | ₹4.8 Cr Quoted ₹5.0 Cr | L-1 | Accepted-AOC Work awarded to lowest Contractor. |
| 2 | L-2₹6.7 Cr+₹1.7 Cr (33.1%)Rejected-AOC | ₹6.7 Cr+₹1.7 Cr (33.1%) | L-2 | Rejected-AOC 2nd lowest |
Tender Value
₹4.7 Cr
EMD Value
₹5 L
Closing Date
29 May 2020, 5:30 pmClosed
E.E. Kalpa Division
Executive Engineer, Kalpa, Division, HP.PWD. Kalpa, District Kinnaur (HP)
C/O 151.60 mtr. Span Jeepable bridge over Ropa Nallah on Talling to Rushklang road at Km. 0/562.50 (SH-Construction of Sub Structure and Super Structure thereof
2020_PWD_37237_1
PW-KNR-E-Tender/19-20-33-60 dt.21-04.2020
Open Tender
Civil Works - Bridges
Item Rate
730 days
Ropa, Pooh, Kinnaur (HP)
Please refer Tender documents.
8 documents required · 8 mandatory
₹5,000
E.E. Kalpa Division
₹5 L
6 Feb 2021
16 May 2020
1 Jun 2020
16 May 2020
29 May 2020
16 May 2020
Amount
Sub-Structure Excavation for Structure :- Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing , removal of stumps and other deleterious matter, dressing of sides and bottom and baclfilling with approved material, including cerriage of surplus materials in all leads and lifts and as per directions of the Engineer-in-Charge complete. upto all depths and in all Kinds of soil.
Abutments
Piers
PCC 1:3:6 in Foundation :- Plain cement concrete 1:3:6 ( one cement , three Sand , six crushed stone aggregates ) nominal mix in foundation with crushed stone aggregate 40mm ( fourty milimetre) nominal size mechanically mixed, placed in foundation and compacted by vibration including curing complete) for 14 days (Fourteen days), including cerriage of matrial in all leads and as per directions of the Engineer-in-Charge complete.
Plain/Reinforced Cement Concrete of grade M-30 in sub structure complete as per Drawing and Technical Specifications including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification clause 1204.3.8 Granular materials, including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications, including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Providing weep holes in Brick masonry/stone masonry/ Plain Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing face. Complete as per drawing and Technical Specifications , including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Super-Structure Steel Work rivetted in built-up section including cutting , hoistting , fixing in position and applying a priming coat of red lead paint in trusses of Steel Truss. including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
For 50mtr span
For deck Plate, Stringer and Cross Beam
Firnishing and placing Reinforcement/ Prestressed cement concrete in super-structure (Kerb) as per drawing and Technical specification ,including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Providing, fittng and fixing Mild steel railing complete as per drawing and technical specification , including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Reinforced Cement concrete Approach slab including reinforcement and form work complete as per drawing and technical specification , including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Providing drainage spouts complete as per drawing and technical specification , including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation , including carriage of material in all leads and lifts and as per direction if the Engineer-in-Charge complete.
V K Gupta and Associates
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .