Loading
Loading…
Loading…
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
1 Sept 2026, 5:00 pm7d left
Executive engineer PHED,city Division Alwar
Executive engineer PHED,city Division Alwar
Work of construction of 200mm diameter tube wells in all strata supply and installation of submersible pump sets and other allied works as per financial offer testing commissioning with 2 year defect liability period under PHED Division Alwar
2026_PHCJA_587270_1
28/2026-27 SE Alwar
Open Tender
Civil Works - Water Works
Percentage
365 days
division alwar
Please refer Tender documents.
3 documents required · 3 mandatory
₹5,000
MD RISL
₹4.0 L
Yes
14 Aug 2026
14 Aug 2026
2 Sept 2026
14 Aug 2026
1 Sept 2026
14 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of tube well from ground level and up to 100 mtr depth and above to accommodate housing assembly pipe in all type of unconsolidated formation such as pebbles, boulders, collapsible formation etc. by Odex drilling method as per IS: IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work will include lowering of housing and strainer pipe assembly and casing shoe including cost of casing shoe, but excluding cost of the casing pipe. The work would be completed after obtaining sand free water. | - | - | - | - |
| 2 | Nominal bore 200 mm dia. | 1 | Mtr | 1,415.25 | ₹1,415.25 |
| 4 | Construction of tube well after completion of drilling by rotary /percussion method & up to 100 mtr. depth in all type of rocks by DTH system as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended up to date) and technical specifications. The work shall be deemed completed only after obtaining sand free water. The bore well should have a throughout nominal size bore beyond casing pipe. | - | - | - | - |
| 5 | Nominal bore 200 mm dia. | 1 | Mtr | 1,070.34 | ₹1,070.34 |
| 6 | Add 15% extra on above item (Item No 2.3.1 to 2.3.3) for drilling depth beyond 100 mtr and up to 200 mtr from ground level, rate shall be applicable for only extra depth beyond 100 mtr and up to 200 mtr. | 1 | Mtr | - | - |
| 7 | Add 30% extra on above item (Item No 2.3.1 to 2.3.3) for drilling depth beyond 200 mtr and from ground level, rate shall be applicable for only extra depth beyond 200 mtr . | 1 | Mtr | - | - |
| 8 | Labour charges for making slots on blank pipes made of ERW MS black pipe ISI marked of following sizes, the slotting should be as per IS:8110-1985. | - | - | - | - |
| 9 | 200 mm dia nominal bore of 5.4mm thickness | 1 | Mtr | 268.64 | ₹268.64 |
| 10 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. | - | - | - | - |
| 11 | 200 mm dia | 1 | Each | 835.59 | ₹835.59 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.01 MB
BOQ_1043413.xls
BOQ • 0.37 MB
NIT28.pdf
Tender Documents • 14.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].