Construction of a boundary wall for the roof and staircase, barbed wire on the boundary wall, iron grills to protect against monkeys, and drain construction at Kasturba Gandhi Girls School, Moradabad.

Mild steel or iron work in heavy sizes such as trusses;builts up gates,door ,frames ,record racks roof work, gates etc wrought to required from including drilling holes, rivetting or welding where necessary,and also including supply of steel ,bolts ,n (DSR 10.16.1)

Supply &fixing Galvanised corrugated iron roofing.24BWD in position including Supply of all materials,labour and T$P etc. Required for the proper completion of the work and including wastage sides complete.(DSR- 12.1.1)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per Sl no. -13.62.1

Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 ( 1 cement : 4 coarse sand ) as per SI no 6.4.1

12 mm thick cement plaster of mix 1:4 ( 1 cement & 4 course sand ) as per IS 13.4.1

Cement Concrete 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)As per DSR No-.4.1.3

Finishing walls Two coat Putty with Two coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete(DSR-13.80+13.41.1

Providing and laying in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded Stone aggregate 20 mm nominal size) and curing complete, excluding cost of form- work, in foundation and floors.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. as per SI no. 10.31

Providing barbed iron wire fencing i/c fixing it to post after stretching it, i/c labour and T&P etc. required for proper completion of the work but excluding supply of post but i/c supply of barbed wire cost of clips.SI no. 10.31

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per SI.No. 2.8.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per SI no. 4.1.8

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 51.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for 5.9.3 Suspended floors, roofs, landings, balconies and access platform

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 5.221 Mild steel and Medium Tensile steel bars

S/F of Sign board i/c all completed ( Rates Senction by SERED MD)

Please Enable Macros to View BoQ information