Loading…
Loading…
Tender Value
₹2.2 L
EMD Value
₹4,420
Closing Date
2 Sept 2026, 6:00 pm5d left
EXECUTIVE ENGINEER PWD ELECT. DN BANSWARA
EXECUTIVE ENGINEER PWD ELECT. DN BANSWARA
Electric Repair and Maintenance Work in Toilets (4 house) at Sainik School Chitorgarh.
2026_CEPWD_590506_10
NIT 11/2026-27 EE PWD ELECT. DN BANSWARA
Open Tender
Electrical and Maintenance Works
Percentage
CHITTORGARH
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
AS MENTIONED IN NIT AND CONDITIONS
₹4,420
Yes
19 Aug 2026
19 Aug 2026
3 Sept 2026
19 Aug 2026
2 Sept 2026
19 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | S&F following sizes (dia.) of ISI marked MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including making jhiri in the wall,clamps at suitable spacing, covering conduit and making good the same as required. | - | - | - | - |
| 2 | 20 mm | 50 | Mtr. | 33 | ₹1,650 |
| 3 | 25 mm | 50 | Mtr. | 47 | ₹2,350 |
| 4 | Supplying and laying FR PVC insulated & unsheathed flexible copper conductor of following nominal sizes with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from copper, stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. | - | - | - | - |
| 5 | 3x 1.5 sq.mm | 100 | Mtr. | 64 | ₹6,400 |
| 6 | 2 x 2.5 sq. mm. + 1x1.5sqmm | 80 | Mtr. | 90 | ₹7,200 |
| 7 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. | 100 | Mtr. | 142 | ₹14,200 |
| 8 | 4 x 10.0 sq.mm | 50 | Mtr. | 505 | ₹25,250 |
| 9 | Providing & Fixing of modular type switch/ bell push duly ISI marked (IS :3854) with CM/L no. printed and made out of unbreakable and fire retardant virgin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including making connections, testing etc as required. | - | - | - | - |
| 10 | 6 A one way switch | 96 | Each | 35 | ₹3,360 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.84 MB
Tendernotice_2.pdf
PDF • 10.33 MB
BOQ_1048677.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].