REPAIR TO FLOORING CEILING JOINERY WORK TILLING AND INTERNAL WATER SUPPLY OTHER MISC B/R WORKS AT INS TUNIR AREA UNDER AGE B/R-II AT NAVAL STATION KARANJA

Amount

Notes : (i) The work consists of 01 job as under:- JOB (A) : TPP 23-24 Ser No. 32 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. ITEMS FOR JOB 'A'

Note:- The Unit Rate quoted in r/o Ser item No 1.02 to 2.10 are deemed to include for the following and nothing extra will be paid for these works: 1. Supplying, erecting and use of scaffolding upto required height (max 25 to 30m) or upto 8th floor height with necessary H-frames, pipes, couplers, buckles, bracing, top platform with support railing at top etc. at all levels of building including carriage of the materials to the location, erecting, fixing the scaffolding and dismembering the same after working and taking away the scaffolding materials etc. complete as per direction of Engineer-in-charge. 2. Supplying, erecting & use of temporary bamboo scaffolding around the building as required. The scaffolding is to be secured properly in position by bracings, ties clamps, etc. complete including providing and erecting working platform at all heights as required, including removal after completion of work all as per direction of Engineer-in-Charge.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specfified and directed.

M&L for ready mix plaster for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4), finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specfified and directed.

M&L ready mix plaster for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified.

M&L ready mix plaster for rendering 5 mm thick on ceilings in cement mortar 1:3 and finishing the surface even and smooth without using extra cement complete all as specfified and directed.

Demolition of pre-cast concrete block masonary built in cement mortar including all quoins, arches, pillars etc. and pre cast concrete articles complete all as specified and directed.

M&L pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed

Supply only liquid water proofing compound as pedicrete URP mix with cement concrete/ cement plaster as per manufacture instruction complete all as specfified and directed.

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed

All as per BOQ srl item No. 1.10 here in before but except bricks complete all as specified and directed Note:- Serviceable bricks obtained from srl item No. 1.09 shall be re-used after cleaning etc

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

Dismantling AC (Corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and as directed

M&L for 6 mm thick asbestos cement corrugated sheet in roof fixed with 'L' or 'J' type hook or crank bolts complete all as specified and directed.

S&F for AC two piece adjustable serrated ridge for corrugated sheets in roof coverings, fixed witth 'L' or 'J' hook complete all as specified and as directed

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering complete all as specfified and directed.

S&F 0.5 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting or curved at end portion of any colour having tansile strength of 550 MPA and AZ-150 or above as in roof covering/glading to wall fixed with self tapping screws, complete all as specfified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour in mangalore pattern or curved and end portion having tenstile strength of 550 Mpa AZ-150 or above as in roof covering / cladding to wall, fixed with self tapping screws complete all as specfified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specfified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specfified and directed.

M&L for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed.

M&L for Preparation of new steel surface of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specfified and directed.

Taking down Chowkhats or frames n exc 1.5 sqm each without taking of shutter from the frame complete all as specfified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each without taking off shutters form the frame complete all as specfified and directed.

Taking down shutter of any discription n.exc 1Sqm each complete all as specfified and directed.

Taking down shutter of any discription exc 1Sqm and n exc 2 Sqm each complete all as specfified and directed.

S&F IInd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered or ornamental type put together with glue pinned at joints complete all as specfified and directed.

M&L second class Hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specfified and directed.

S&F factory made 30 mm thick solid core Flush door shutter with block board with BWP plywood on both side complete all as specfified and directed.

M&L second class hardwood 30 mm thickness plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specfified and directed.

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specfified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site complete all as specfified and directed.

S&F Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete all as specfified and directed.

S&F 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specfified and directed.

S&F 30mm thick factory made pre laminated flush door shutters, 2 mm finishes in hi-gloss and confirming to IS -2046 and solid core construction, with particle board core and plywood face panels, suitable for exterior & interior grade door, commercial type on both sides complete all as specfified and directed.

S&F stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specfified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer complete all as specfified and directed.

S&F 150 mm stainless steel barrel tower bolts of extruded section and fixed to shutter complete all as specfified and directed.

S&F two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and directed.

S&F 100mm long medium grade stain less steel butt hinges bright polished fix to steel chowkhat with SS screw complete all as specfified and directed.

S&F 300mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt complete all as specfified and directed.

S&F mild steel pressed handles, oval type, stove enamelled black 150mm long fancy type complete all as specfified and directed.

S&F for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors including connected items,with and making good to the disturbed portion with its original specifications incl taking down existing members/frame any position complete all as specified and directed.

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specfified and directed.

S&F in repairs aluminium anodized grill of design DG 208 pattern made out of 10mm dia rod Fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all as specfified and directed.

S&F 4mm thick sheet glass ordinary quality black glass colour, white or multicolour and glazing with oil putty in square exc 0.5 Sqm in each pane with glazing pins incl hacking out old broken glass (any thickness size, quality) complete all as specfified and directed.

S&F 5.5mm thick sheet glass ordinary quality black glass colour, white or multicolour and glazing with oil putty in square exc 0.5 Sqm in each pane with glazing pins incl hacking out old broken glass (any thickness size, quality) complete all as specfified and directed.

S&F 4mm thick figured or pin headed glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane with glazing pins including hacking out old broken glass complete all as specfified and directed.

S&F aluminium (extruded section body) hydraulically regulated designation No-3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight betwwen 61 to 80 Kg and fixed complete all as specfified and directed.

S&F double action floor spring hydraulically regulated made up to min 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty & fixed, complete all as specfified and directed.

S&F in repairs night latch 7 lever Godrej brass locking mechanism steel body with scratch resistant powder coated finish of size 98mm x 67mm x 28mm complete all as specfified and directed.

S&F in repairs 12 mm thick vertical toughened glass including frame as in door shutters / partition with including stainless steel SS-304 patch fitting fixed with Anchor fastner, etching, pivot arrangements complete each glass panes shall be exceeding 1.5sqm, but not exceeding 2 sqm each, all edges of glass shall be diamond polished, accurate designed holes to be installed by means of steel fittings. complete all as specified and as directed.

All as per BOQ serial item No 1.55 hereinbefore but 12mm thick fully frosted high quality toughened glass with unit colour digital logo and other design/pattern like text in hindi/ english furnished by Engr-in-Charge etc. Colour of digital logo/pattern and matter will be furnished complete all as specfified and directed.

S&F 30 mm dia stainless steel handle of 45 cm long and fixed to toughned glass as per manufacturer's instructions. complete all as specified and as directed.

S&F stainless steel glass lock fixed to toughened glass as per manufacturer's instructions complete all as specified and as directed.

M&L for stainless steel 304 grade framed work fancy, ornamental type in Gates, stair hosing work, railing and other similar works including welding, grinding, buffering, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable locking arrangement complete all as specfified and directed.

M&L in repairs cupboard, cabinate, wardrobe and kitchen is fabricated using 18/19 mm thickness medium density fibre board (MDF) exterior grade, fixed with each other using solvent cement adhesive and fixed to timber frame work with screw complete all as specfified and directed.

S&F Continuous (piano) hinges 30mm width of flaps, brass, bright finish or electrogalvanised complete all as specfified and directed.

S&F 'L' Bihari hydraulic 0 crank, auto hinges 180 degree openable, stainless steel hinges 125x63 mm long bright polished fix to steel chowkhat/timmer frame work with screw or nut or bolt complete all as specfified and directed.

S&F in repairs magnetic catcher 55x29 mm size for continuous opening and closing of doors shutter like use for door megnet lock, cupboard magnetic lock, wardrobe, and similar use incl all fitting like screw complete all as specfified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specfified and directed.

S&F false ceiling with Armstrong XL 24mm grid system of grid size 600x600mm with 12 mm thick ceiling board of RH-90. including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GE flat 40x3 mm sie 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm anglescomplete all as specfified and directed.

S&F in repairs 10-12mm thick armstorng ceiling board of RH -90 false ceiling consisting of 600mm x 600mm insert existing frame work without disterbing the other false ceiling and making good existing frame with complete all as specfified and directed.

S&F PVC False ceiling consisting of 600 mm x 600 mm, 8-10mm thick prelaminated self design including frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm dia GI (upto 1200 mm length) adjusting and maintain for proper level to roof salbs by means of ceiling cleats made out of GE flat 40x3 mm sie 60mm long and expansion hold fasterners 12.5mm dia 40mm long complete etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete all as specfified and directed.

S&F in repairs 8 to 10mm thick PVC false ceiling consisting of 600mm x 600mm prelaminated self design insert existing frame work without disterbing the other false ceiling and making good existing frame with complete all as specfified and directed.

S&F 10 to 12mm thick plaster of paris sheets fix in ceiling with and including grid made out of angles and tees of one mm thick G I sheets fixed at not more than 45cm centre to centre in both directions. GrId secured by vertical tai of GI sheet angle at not more than 1.2m centre to centre in both directions. The veritical tai of GI sheet angle shall be fixed with M S dash through fastners of 8 mm dia. The ceiling is to be provided at different profiles like curved, flat, sunk and or raised mouding, the joints shall be filled with plaster of paries complete all as specfified and directed.

M&L in repairs 6mm thick non asbestos fibre cement building designed boards in ceiling fixed or laid /inserted to timber/GI/Aluminium frame work with screws complete all as specfified and directed.

M&L preparing of new POP/ false ceiling surfaces and applying two coats of royal acrylic distemper on walls or ceiling complete all as specfified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specfified and directed.

M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for mirror finished vitrified tiles 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 10 mm thick screed bed in cement mortar in 1:4, complete all as specfified and directed.

M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specfified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L Machine cut kota stone kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specfified and directed.

S&F Granite tile of 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying in vertical surfaces, complete all as specfified and directed.

M&L for green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specfified and directed.

S&F in repairs Decorative Hollow PVC sheet 10 mm thick fixed to wall panelling with self drilling screws including necessary frame of aluminium section 51x35x.55mm and 600 mm c/c 51x32x.55mm grid work and corner mouldings as required as per manufacturing instruction complete all as specfified and directed.

S&F in repairs suspended false ceiling, Decorative Hollow PVC sheet 10 mm thick fixed to ceiling section with self drilling screws as per manufacturing instruction. Size of the main supporting section (Ceiling Section) is 80x 26 x 51 mm, Perimeter chanel 20 x 28 x 30 mm, Intermidiate chanel(primary section to support the ceiling section) 15 x 45 x 15 mm and ceiling angle(to provide suspensions from the structural soffit) is 25 x 10 mm including necessary frame or grid work and corner mouldings, the ceiling is to be provided at different profiles like curved, flat, sunk and or raised mouding, complete all as specfified and directed.

S&F in repairs Vitreous China sensor Urinal of size 480x300x740 mm required colour including brass chromium plated brackets ,waste coupling, PVC connection and waste pipe and sensor fittings complete all as specfified and directed.

S&F in repairs one piece square model water closet floor mounted Square Commode (White) S trap - white ceramic western commode (white) shape-Elongated type, size 685x360x720mm weight not less 20 Kg 'S' trap and slim seat cover & fitting complete all as specfified and directed.

S& F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, 32mm dia PVC waste pipe, inlet ,outlet etc complete all as specified and directed.

S&F in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including 32mm dia PVC waste pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specfified and directed.

S&F in repairs 5.5 mm thick and 120/125mm wide sheet glass shelf assembly with chromium plated bracket guard and railing 500/600mm long as complete all as specfified and directed.

S&F in repairs 15mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed bothends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts complete all as specified and directed.

S&F in repairs Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specified

S&F in repairs brass chromium plated towel rack fixed on wall complete all as specified and as directed.

S&F in repairs 600 mm long, 20mm dia brass chromium plated towel rail fixed on wall complete all as specified and as directed.

S&F in repairs brass chromium plated towel ring, 20mm dia, D type , 60 cm long between flanges complete all as specified.

S&F in repairs soap dish, chromium plated, fixed to plugs with chromium plated brass screws complete all as specfied and as directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S&F in repairs 15mm dia concealed stop cock chromium plated with long screwed down high pressure with cruteh or butterfly handle screwed both end for iron pipe complete all as specfified and directed.

S&F in repairs toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specfified and directed.

S&F in repairs 15mm dia bib cock 2-way double handle with flange standard of CP any colour screwd for iron pipes and fixed complete all as specified and as directed.

S&F in repairs 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

S&F in repairs 15 mm dia PVC connection 450mm longwith brass fly nut complete all as specfified and directed.

S&F in repairs drapery rod PVC coated 25mm internal dia with bracket incl decorative brass end knob etc and fixed on wall complete all as specified and directed

S&F in repairs stainless steel 25mm thick tubular curtain rods fancy type with brackets ,stops, rollers etc complete all as specfified and directed.

S&F in repairs stainless steel bracket/stops and roller for tubular double courtain rods/ pelmets fancy type complete all as specfified and directed.

M&L applying 2 mm thick exterior grade wall care putty on wall/ ceiling multipurpose mixer shall be used for uniform and mixing of putty complete all as specfified and directed.

M&L for attending complaints related to plumbing work, which includes all type of water supply and obtaining completion from user this including minor repairs to taps, stop cock, mixer, health faucet, bottle trap, pillar tap, flushing cistern, replacement of washer, fitting to check nut, PVC Connetcion and aking w/s functional incase of blockage due to any reason re-fixing of GI Pipes joint if any leakage is found. Repair of unfunctional PVC cistern repair/ replacement, float valve, repair and replacemnt of PVC water tank etc by deploying required menpower for day to day attend the complaint within time frame. Tradmen shall have with minor spares such as check nut, washer, Nail, Screws, clips, Ladders, Ghori, Rehri etc.and necessary suitable T&P items required to rectifiy the complaint shall be provided by the contractor and complaint shall be attend within 10.00 KM peripheral at Naval Station Karanja complete all as specfified and directed. Note: Main spares part ie. consumable items shall be provided by deprtment as per site requirement. Miniumum 02 person shall be present on all working days 0900 hrs to 1700 hrs to attend the above complaints/ maintenance and reporting the progress to AGE B/R-II Sub Division Karanja complete all as specified and directed by Engr-in-charge.

M&L for attending complaint related to carpentery work, which includes all type of Carpentry repair i.e. repairs and refixing of aluminium, wooden and steel door, window and ventilator with frame/ chowkhat. Repairing, tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolt, glass pane, wire mesh, drapery rod etc, by deploying required menpower for day to day attend the complaint within time frame Trademen shall have with minors such as screws, clamps, cleats, Ladders, Ghori, Rehri, drill machine, hamber machine, welding machine, welding electrods and same like stainless steel electrods and welding etc all tpye of suitable T&P reqd to rectifiy the complaint shall be provided by the contractor and complaint shall be attend within 10.00 KM peripheral at Naval Station Karanja complete all as specified and directed by Engr-in-Charge. Note: Main spares parts ie. consumable items shall be provided by the department as per site requirement. Miniumum 02 person shall be present on all working days 0900 hrs to 1700 hrs to attend the above complaints/ maintenance and reporting the progress to AGE B/R-II Sub Division Karanja complete all as specified and directed by Engr-in-charge.

Note (i) Item No 2.09 & 2.10 : If Contractor fail to attend the complaint on same day a recovery of Rs. 408/- per complaint shall be made from his dues. (date of issue of complaint slip and date of rectification of complaint will be the base of recovery) (ii) The contractor shall arrange the man power as and when required any numbers any time between 9.00 AM to 5.00 PM. (iii) Complaint register/slip shall be provided at the time of claiming the payment.

Everest Construction

K N CONSTRUCTION

SAI ENTERPRISES

M/S Rana Enterprises

Bidder Name

M/S Rana Enterprises