Development of Potato Seed Multiplication Farm at Sanasar (Natha top) by way of construction of Additional/Balance work for various buildings. (under NABARD).

Amount

Dismantling roofing including ridges, hips, valleys and gutters etc, and stacking the material within 50 metres lead of G.S. Sheet.

Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purilins and trusses and including cutting to size and shape whereever required . 0.63mm thick with zinc coating not less than 275gm/m2.

Providng and fixing wind ties of 40x6mm flat iron section .

Providing ridges or hips of width 60 cm overall width plain G.S sheets fixed with polymers coated J.or hooks , bolts and nuts 8mm dia G.I limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275 gm/sqm.

Providing and fixing 30 mm thick glazed shutters for doors, windows, and clerstory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws . Second class deodar wood.

Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Demolishing cement concrete manually / by mechanical means including disposal of material with in 50 mtr lead 1:3:6 or richer mix.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate ) finishing with a floating coat of neat cement including cement slurry and curing complete , but excluding the cost of nsing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. (Including all carriages and leads).

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixied in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs shall be paid for separtely).First class kail wood

Providing and fixing 6 mm thick flat pressed ply in ceiling with necessary nails etc. complete (frame work to be paid separetly)

Providing and fixing plain, square edged wooden beading 65x12mm section with screws of approved quality for ceiling. First class kail wood.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.

20 mm cement plaster of mix 1:4 ( 1 cement : 4 fine sand)(Including all carriages and leads).

Structural Steel work welded in built up sections,trusses and framed work, including cutting , hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Engagement of Blacksmith for cutting of damaged truss angle

Engagement of Helper with Blacksmith for cutting of damaged truss angle

Hire charges of Generator set for cutting of damaged trusss angle including POL all complete .

Hire charges of Welding set for cutting of damaged trusss angle including cost of welding rods and other allied items all complete .

providing and fixing of steel iron (ready made) Eves Boarding (18 gauge)

Engagement of Carpenter for easing of doors /windows of various buildings.

Engagement of Helper with Carpenter for easing of doors /windows of various buildings.

Providing and fixing 30 mm thick wire gauze shutters using galvanized MS wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows, and clerstory windows with ISI marked MS pressed but hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge . Second class deodar wood.

Providing and laying Vitrified tiles in different sizes ( thickness to be specified by manufacturer). With water absorption less than 0.08% and conforming to I.S. 15622 of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3( 1 cement : 3 coarse sand) , including grouting the joint with white cement and matching pigments etc, complete. Size of tile 600x600 mm. (Including all carriages and leads).

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white vitreous china flushing cistern, and CP flush bend with fittings and CI brackets, 40mm flush bend , over flow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets , cutting and making food the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved make conforming to IS standards and weighing not less than 810 gms

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing P.V.C. Waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe (32 mm dia)

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipe conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameer

Providig and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing upplasticized PVC connection pipe with brass unions,45 cm length and 15 mm nominal bore

Supply,Installation, Testing and Commissioning of 35 ltr capacity Geyser of standard quality and make as approved by Engineer-in-charge.

Constructing brick masonry road gully chamber of specified size with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) including precast RCC horizontal grating with frame complete as per standard design.Chamber size 50x45x60 cm including precast grating with frame 500x450mm horizontal grating. (Including all carriages and leads).

Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. EHD -35( circular shape 560mm internal dia ) (Including all carriages and leads).

Finishing walls with water proofing cement paint of required shade on New work ( two or more coats applied @ 3.84 kg/10sqm)

MANZOOR AHMED NATNOO

SH. FAROOQ AHMED BUTT

M/s Shakeel Ahmed