MISC B/R REPAIR WORK PLASTERING, FLOORING, TILING, SANITARY WORK ETC RA LINE IN ZONE C OF SOUTH AREA AT GE NASIRABAD

Amount

Taking down cement or cement lime plaster on stone or bricks wall etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed.

Raking out joints/ pointing to brick work/random rubble stone masonry in walls or to brick/stons on edge in floors all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M& L for rendering in cement mortar (1:6), 15mm thick on brick masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement or as per manufacturer's instruction on other than fair faces of brick / stone masonary surfaces,incl dubbing coat of required thickness finished even and smooth without using extra cement, complete all as specified and directed. Note:- WPC measured and paid separately

M & L for rough cast plaster mix with crusted stone (6-10 mm), sand and cement in the ratio 1:1:1 , over 15mm thick rendering in CM 1:4 as in under coat including dubbing coat (if required) complete all as specified and directed.

M&L for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course complete all as specified & directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick coat of white wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

M & L preparation of new decorated surfaces of walls/Rough cast plastered surface and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed

M&L for preparation of old white washed surfaces of wall and applying two coats of white wash complete all as specified and directed

M&L for complete removal of existing treatment and preparation to old plastered surface of wall and apply two coats of oil bound distemper over a coat of 1mm thick wall care putty and match to existing colour complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300 x 450 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including 10mm thick screed plaster in cement mortar 1:4, complete all as spd & directed.

M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M & L for 16-18mm thick black granite on kitchen platform and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified & directed.

Demolition of stone/brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M & L for old size fly ash brick work straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by the Engineer-in-Charge.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm without drainage board, with plugs, washers and waste including fixing cantilever brackets complete all as specified and directed. Note :- Minor variation in dimension + 20mm as per standard catalogue of manufacturer may be approval of GE in writing without price adjustment.

S & F in repairs stainless steel plate rack made of 0.50mm thick of over all size 914mm x 609 mm x 255 mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed. Note :- Minor variation in dimension may be permitted as per standard manufacturing models of manufacturer without price adjustment with prior approval of GE but weight shall not be less than 7.00 Kgs.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M&L for machine cut kota sotne slab, 20-25mm thick over and including 15mm thick screed bedding in cement mortar 1:6 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified.

M&L for machine cut kota stone slab in skirting / steps / risers of reqd size, 20 to 25mm thick & including 15mm thick screed bedding in cement mortar 1:4 as in floors, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing with mirror polish complete all as specified and directed.

Only on old surfaces mirror polishing on marble/granite/kota stone where ever required to give high gloss finish complete all as specified & directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40 mm graded aggregate) as in sub base , complete all as specified and directed.

M&L for factory made 60mm thick machine pressed precast cement concrete coloured, reflective type interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for chequered cement concrete tiles 25 x 25 cm x 22-25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20 mm screed bed in CM mortar 1: 6 complete all as specified & directed.

M&L for providing and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 Cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete, all as specified & directed.

Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.

Taking up or down steel tubing and connection 20mm bore keeping aside for reuse or removing to store complete all as specified and directed.

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

Supply and fix mild steel water tubing 20 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3), complete, all as spd and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site and making good disturbed surfaces of wall in CM (1:3), complete, all as specified and directed.

S&F Pressed steel door frame of size 105 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate,hold fasts etc. complete all as specified. The rates include for filling of PCC 1:3:6 complete all as specified and as directed.

S&F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. The rates include for filling of PCC 1:3:6 complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge

S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed.

S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed.

S & F for 2nd class HW 35 mm thick, gauged and skeleton shutters (Three Panels), factory made open rebated and prepare to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 2009 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.

S&F Steel window/ventilator factory made, made out of MS hollow section 79mm x 39mmx1.6mm thick frame with double shutter (glazed & wiregauged shutters) made out of Z section using flush butt welding and tennon riveting all as per IS 1038/83, dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE, provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook & eye welded to frame and shutter, four Nos lugs welded to frame inculding necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-1 including two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note: Wire mesh and sheet glass shall be measured & paid separately under respective items.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and removing from site all as specified and directed

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf and refixing in same opening after resecuring with and incl nails to builder hardwares all as specified and directed

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3 mm thick sheet glass, ordinary / figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

M&L for rendering 15mm thick in CM 1:3 on fair faces of brick work, concrete surfaces as in sunken / roof treatment finished even and smooth without using extra cement with and including applying two coats of acrylic polymer treatment as per manufacture instructions complete all as spd & directed.

Supply only water proofing compound ISI Marked complete all as specified and directed.

M & L for PCC (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed.

S & F in repairs Vitreous China, Squatting pan Orissa pattern size 580 x 440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with Vitreous China ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe , including PCC (1:2:4) type B-1 for fixing of WC and making good the floor to match the existing complete all as specified and directed.

S&F in repairs PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity . White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S&F in repairs PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

S&F in repair angle valves 15mm bore , cast copper alloy chromium plated with long sunk and cap (Concealed type), ISI marked, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F in repair stop/angle valve 15mm bore cast copper alloy, chromium plated, ISI marked with long crutch or butterfly handle screwed down high pressure screwed both ends for iron pipe complete all as specified & directed.

S&F in repairs wash hand basin vitreous china white / ivory colour flat size 450 x 300mm fixed including waste coupling, waste pipe & connection pipe complete all as specified and directed.

S&F in repairs Chromium plated bib taps, with capstan heads, ISI marked, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L18/19mm thick block board grade-.II quality, interior grade with decorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works all as specified and directed.

S & F continuous (piano) hinges, mild steel, bright finish width of flaps (when open ) 40 mm all as specified and directed.

S & F 100mm size hasp and staple, aluminium anodised safety type, fixed with screws complete all as specified and directed

S & F 300mm long aluminium alloy,anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S & F extruded aluminium handle fabricated type, anodised 150mm size ISI marked complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S&F 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F butt hinges, extruded aluminium anodised and fixed, type B-21, ISI marked of size 100 mm, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with wire staples complete all as spd & directed.

S&F Second class HW, plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed.

M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as spd & directed.

S&F 3.00 mm thick sheet glass, ordinary & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

Taking down 100mm / 75mm dia PVC (SWR) pipe (any size or pattern ) including all fitting, heads, shoes, bends and removing from sites complete all as specified and directed. (Measured over all as fixed along the centre line over the fittings and accessories).

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new PVC clamps complete all as specified and directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door with cement joint complete all as specified and directed.

S&F 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted.

M & L for 50 mm thick Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, elf faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified.

M & L for dismantling of loose / disintegrated portion of RCC chajjas, bend, shelves, beams, balconies and similar work at any position or any height and doubbing out with PCC 1:1.5:3 , 15 mm to 50 mm thick using 6 to12 mm graded stone aggregate to make up and finished required shape including applying two coat of anti corrosive paint over a coat of primer on exposed surfaces and provision of ncessory suporting form work including 10 mm thick plastering in CM 1:4 on concrete/brick masonry surfaces finished even and smooth complete all as specified & directed.

S&F mild steel framed work such as grating cooler stands, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F Deco door seal 1.5" width gate bottom sealing strip draft excluder stopper with aluminium plate and nylon bristles for weather stripping, air sound blocking complete all as specified and directed.

M&L for LDPE pipes of pressure rating 6 Kgf/cm2 fixed complete to walls, ceiling or in flooretc complete all as specified & directed.

M&L for 25mm thick, PCC (1:2:4) type B-0 using 12.5 graded stone aggregate as in sub base for floor finishes, complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

Roughening surfaces of old concrete floor by picking sweeping clean and washing down water to remove dust etc complete all as specified and directed.

S&F in repairs, 25mm dia stainless steel curtain rod heavy duty with a pair of decorative Curtain Finials/ knob & heavy Curtain Support Bracket for rod made of stainless steel, etc. complete all as specified & directed.

VIPUL CONSTRUCTION COMPANY

Shree Sai Ram Enterprises

M/s ESS KAY Construction

kirtiman traders

M/s SUNIL ENTERPRISES

M/S Nexus Projects

JWALA ENTERPRISES

V K LAKWAL CONSTRUCTION