SPECIAL REPAIRS TO BLDG No. GB-08 (MES INSPECTION BUNGLOW) AND T-1 RA LINE UNDER GE BELGAUM

Amount

Dismantling single layer Mangalore pattern roofing tiles and removal of debris off the premises and serviceable tiles taken as credit complete all as specified and directed.

Dismantling Battens for tiles ,shingles etc , spaced exceeding 15 cm for unframed work , of any size including tilting fillets and removal of debris off the premises and serviceable battens/filllets taken as credit complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section inany position for unframed work and removal of debris off the premises and serviceable timber scantlings taken as credit complete all as specified and directed.

Material and labour for 2nd class hard wood in scantling, clean sawn fixedcomplete all as specified and directed.

Fixing only serviceable timber scantling of any description obtained from dismantling in un-framed work complete all as specified and directed.

Dismantling fillets ,rails ,posts ,rafters ,purlins etc under 40 sqcm insection ,unframed works and removal of debris off the premises and serviceable items taken as credit complete all as specified and directed.all as specified and directed.

Material and labour for Seccond class hard wood plain, fillets ,recangular in section ,wrought secured with screws ,sectional area exceeding 13 sqcm and not exceeding 25 sqcm complete all as specified and as directed.

ditto all as per item no :07 here in before but except battens,any of the foregoing and refixed in position

Material and labour for Preparing surfaces of wood ,new or old of any description and girth and treated with two coats of creosote oil complete all as specified and directed.

Supply and fix Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,ridge fixed with self tapping screws complete all as specified and directed.

Supply and fix Plain Galvanised mild steel sheeting with grade of zinc coating 275 ,0.80 mm thick in ridges ,hips ,valley gutter ,drip and straight flashings at expansion joints including dismantling plain or corrugatedv steel sheeting ,any gauge ,thickness in roof coverings complete all as specified and directed.

Supply and fix Rolled mild steel Roof trusses ,trussed purlins ,rafters ,struts (beam,tee,angle,channel or flat sectiond including distance pieces ,cleats etc confirming to grade Fe 410-W Gde E-250 quality A or Fe 310-0 complete all as specified and directed.

Supply and fix Rolled mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and directed.

Supply and fix Mild steel work in wind ties etc conforming to Fe-290 Gde- E-165 complete all as specified and directed.

Material and labour for Cement concrete Eterna Rusted Red/Grey colour tiles of size 420 mmx330 mm x15 mm thick in roofing ,interlocking at side joints ,laid dry complete all as specified and directed. Make : ETERNA MODEL OF INDO GRACE /PIONEER

Material and labour for Cement concrete Rusted Red/Grey colour Ridge cap of size 360mmx207mm x 240 mm ,15 mm thick in roofing bedded and jointed in cement mortar 1:6 complete all as specified and directed. Make :PIONEER

Material and labour for Cement concrete Rusted Red/Grey colour HIP STARTER of size 360mmx 210 mm ,17 mm thick bedded and jointed in cement mortar 1:6 complete all as specified and directed. Make :PIONEER /INDO GRACE

Material and labour for Cement concrete Rusted Red/Grey colour three way cap of size 351mmx 160 mm x429 mm mm ,15 mm thick bedded and jointed in cement mortar 1:6 complete all as specified and directed. Make :PIONEER /INDO GRACE

Material and labour for Providing Cement concrete 1:3:6 Type C-1 using 20 mm graded stone aggregate as in coping/bed plates ,eaves filling in roof including necessary form work complete all as specified and as directed.

Dismantling asbestos cement (corrugated ,semi corrugated ,translucent etc ) sheet in roof coverings and removal of debris off the premises and serviceable asbestos sheet taken as credit complete all as specified and directed..

Material and labour for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roof ,walls fixed withL type or J type or cranked hook boltscomplete all as specified and directed.

Material and labour for 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets fixed with L type or J type or cranked hook bolts complete all as specified and directed.

Dismantling boarding of any description fixed in any position with nails and removal of debris off the premises and serviceable board taken as credit complete all as specified and directed.all as specified and directed.

Material and labour for 4mm thick Aluminium Composite Panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick aluminium alloy PERALUMAN-100 (AlMg1-NS41), weight not less than 7.6 kg per sqm, complete with all necessary sub-structures, anchors, hardware and fittings to provide a total installation, fixed to existing wooden/ steel members all as per manufacturers instructions complete all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc. Make: Armstrong/ Aludecor/ Alucobond/ Eurobond

Material and labour for Preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Taking down eaves gutter pipes ,rain water pipes (of any pattern) including fittings such as head,shoes ,bend swan neck etc and removal of debris off the premises and serviceable items taken as credit complete all as specified and directed.

Supply and fix PVC (SWR) eaves gutter ,Half square 150 mm dia complete all as specified and directed

Supply and fix PVC (SWR) pipes 110 mm dia ,single socketed in any length and jointed with solvent cement fixed to wall complete all as specified and directed.

Supply and fix in repair PVC (SWR) bends any radius provided with access door complete all as specified and directed.

Dismantling wall or ceiling boards or insulation boards/slab any thickness including cover fillets and removal of debris off the premises and serviceable boards taken as credit complete all as specified and directed.

Supply and fix Suspended False Ceiling System with 16 mm thick mineral fibre acoustical MINA TUFF EDGE TILES (MIRO LOCK) ,white ,fibre performance class-I (BS 456 ,Part 6& 7), with bio coating on the exposed face of tiles ,module size 600mmx600mm laid on 15 mm thick SILHOUTTE EXPOSED GRID system with minimum load carrying capacity of 11.68 kg/sqm white or black colour including dismantling existing false ceiling of any description and type and making good disturbed surface including removal of debris off the premises and serviceable items taken as credit complete all as specified and directed.

Supply and fix High pressure steam cured (HPSC) non asbestos fibre cement building board 4 mm thick in false ceiling with aluminium anodized snap grid of size 60x60 cm in ceiling with Tee section 35x25x1.25 mm,angle 25x25x1.25 mm thick including 2 mm dia GI hanging wire with al hangerl fittings etc and applying three coats of white wash on ceiling complete all as specified and directed.

Taking down cement plaster on brick or stone walls built in cement mortar including removal of debris off the premises complete all as specified and directed.

Material and labour for Rendering 10 mm thick in cement mortar 1:6 on fair faces of Stone masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5 mm thick in cement mortar 1:4 with water proofing compound over 10 mm thick in cement mortar 1:4 on external wall surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofig compound

Material and labour for Preparation of newly plastered wall surfaces and applying two coats of oil bound distember over a coat of alkali resistant primer and wall putty complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed. Note : Make of exterior emulsion paint and primer :Asian Paints . Brand APEX ULTIMA

Material and labour for Preparation of newly plastered or un plastered wall surfaces and applying two coats of cement based paint complete all as specified and as directed

Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying two coats of oil bound distember over a coat of alkali resistant primer and 1 mm thick wall puttycomplete all as specified and as directed.

Material and labour for Complete removal of old plastered/unplastered surfaces of wall and brooming down and applying two coats of exterior emulsion paint over a coat of water based primer complete all as specified and as directed. Note : Make of exterior emulsion paint and primer :Asian Paints . Brand APEX ULTIMA.

Demolition of Pre cast concrete articles and precast concrete block including removal of debris off the premises and material and labour for Precast cement concrete block masonry Type C1 1:3:6 (using 20 mm graded stone aggregate ) with Solid blocks exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Demolition of cement concrete in ground floors not exceeding 15 cm thick ,unreinforced including removal of debris off the premises complete all as specified and directed.

Material and labour for Plain Cement Concrete 1:3:6 Type C2 (using 40 mm graded stone aggregate) 75 mm thick as in plinth protection/paving including necessary form work and demoition of existing Plain Cement Concrete of any description not exceeding 15 cm thick ,removal of debris outside the MD Land complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6, type C1, (Using 20 mm graded stone aggregate), 25mm thick in sub base of flooras level course complete all as specified and directed.

Material and labour for Plain cement concrete 1:4:8, type D2, (Using 40 mm graded stone aggregate), 75mm thick in sub base of floor as level course complete all as specified and directed.

Material and labour for Premium quality Coloured vitrified tiles, square or rectangular, light shade, 10mm thick, area of each tile not exc 0.36 Sqm as in flooring, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Material and labour for Premium quality coloured vitrified tiles, square or rectangular, light shade, 10mm thick, area of each tile not exc 0.36 Sqm, on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

Material and labour for Premium quality coloured non skid ceramic tiles, edge cut, 6 to 7mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed.

Material and labour for Premium quality coloured glazed ceramic tiles 300x 200 mm size, 6mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 all as specified and directed.

Material and labour for Premium quality coloured Joint free non skid ceramic tiles, 6 to 7mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

Material and labour for Premium quality coloured glazed ceramic tiles 450x350 mm size, 7mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors,aprons etc laid dry and pointedand removal of debris off the premises and serviceable tiles taken as credit complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises complete all as specified and directed.

Material and labour for 18 to 20 mm thick Granite slab work (table rubbed and polished) insteps ,jambs ,pillars ,window cills ,cooking platforms, wash basin platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of granite including 15 mm thick screed bed 1:4 complete all as specified and directed.

Material and labour for 12 mm thick Granite slab work (machine cut ) ,bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigments to match with the shade of granite stone including grinding and polishing and 15 mm thick screed bed 1:4 complete all as specified and directed.

Material and labour for 100 mm thick Plain cement concrete 1:2:4 type B 2 using 40 mm graded stone aggregate including necessary form work and finished even and smooth using extra cement complete all as specified and directed.

Material and labour for Premium quality exterior coloured polished designer cement concrete tiles size 20cm x 20cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and directed.

Material and labour for Plain cement concrete 1:4:8, type D2, (Using 40 mm graded stone aggregate), 100mm thick in sub base of flooras level course complete all as specified and directed.

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments with glossy finish on top, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and directed.

Material and labour for 55 to 60mm thick Machine pressed precast concrete interlocking coloured paver blocks, M-40 grade, any shape and size glossy finish on top with grey cement and pigments, confirming to IS 15658-2006 complete all as specified and directed.

Material and labour for 50 mm thick crushed stone sand (M-Ssand/ Robo Sand/i-Sand) filling under interlocking paver blocks including watering and consolidation complete all as specified and as directed.

Material and labour for Preparation of surfaces of tandoor stone/ kota stone/Terrazo tiles including grinding and polishing by machine complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each and taken as credit complete all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each and taken as credit complete all as specified and directed.

Taking down shutters of any description area not exc 1 sqm each and refixing in the same opening after repair complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm eachand refixing in the same opening after repair complete all as specified and directed.

Material and labour for 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position all as specified and directed.

Supply and fix 35 mm thick second class hard wood, Plain framed, panelled shutter with lock rail and panel of 12mm thick plywood BWR 7 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Supply and fix 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass ,gauze etc fitted with cut and mitred beads rebated sash bars any numbers for securing gauze etc divided into squares as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

All as per item no :71 here in before but window/ventilator provided with stiles and rails as specified in SSR Part I, Section 8. Clause 8.24 (b) and fitted to chowkats complete all as specified and as directed.

Supply and fix Aluminium anodised sliding window (Triple track) Standars section of size 92x31.75x1.60 mm thick for bottom track ,section size 92x31.75x1.40 mm thick for side and top frame , section size 39x17x1.40 mm thick for top and bottom shutter rail , section size 39x17x1.40 mm thick for outer style , section size 39x27x1.40 mm thick for inner lock style including fabrication to required size and fixed with 4 mm thick sheet glass ordinary quality ,glazing and rubber gasket and fitting etc with roller suitable spring catcher heavy duty ,handle and locking arrangement complete all as specified and directed. Note : (i) Thickness of anodisation shall be of 15 microns (ii) Make of aluminium section : Jindal/Hindalco/Indal

Material and labour for powder coated aluminium frame work as in doors, partitions and windows using standard aluminium extruded sections with thickness of powder coating not less than 50 microns including provision of glazing clips, hinges, handles, etc all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately. (iv) Make of aluminium section : Jindal/Hindalco/Indal

M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on single side reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed

Material and labour for Mild steel ventilator/window with top hung shutter including hinges ,steel peg ,stay etc fixed in repair complete all as specified and as directed.

Supply and fix Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with tinned tack of galvanised wire staples complete all as specified and directed.

Supply and fix in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with tinned tack of galvanised wire staples complete all as specified and directed.

Supply and fix MS butt hinges 100mm in size, medium weight, cold rolled all as specified and directed.

All as per item no :80 here in before but of size 75 mm

Supply and fix in repairs Helical door spring MS 300 mm long ordinary rat tail pattern sspring including roller and roller plate complete all as specified and directed.

Supply and fix 100 mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and directed.

Supply and fix 150 mm long extruded section aluminium alloy anodised handles fabricated type complete all as specified and directed.

Supply and fix 150 mm long aluminium anodised hasp and staple complete all as specified and directed.

Supply and fix 150 mm long extruded section aluminium anodised barrel tower bolts complete all as specified and directed.

Supply and fix 100 mm long extruded section aluminium anodised barrel tower bolts complete all as specified and directed.

Supply and fix Brass cast type door handle 150 mm size complete all as specified and directed.

Supply and fix Brass sliding door bolts 300 mm long with sand or die cast hasp ,staple (bolt type ) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

Supply and fix aluminium anodised sliding door bolt 300 mm long with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and directed.

Supply and fix Continuous (piano) hinges ,brass ,bright finish of electrogalvanised ,40 mm width of flaps (when open ) complete all as specified and directed.

Material and labour for Preparation of newly painted wood and wood based surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of old painted wood and wood based surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and fix Mild steel Flat iron size 25x3 mm as in holdfast and similar small article confirming to Fe-290 Grade-E-165 complete all as specified and as directed.

Hacking out old broken glass (any thickness/size ,quality or description ) from wooden frames ,glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed

Supply and fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed

Supply and fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.50 sqm in each pane complete all as specified and as directed

Taking up or down steel tubingand connections 15 mm dia bore of pipe

Taking up or down steel tubingand connections 20 mm dia bore of pipe

Material and labour for Cutting chases for concealed water tubing and making good in cement mortar 1:3 cutting not exceeding 10 cm girth in stone / concrete block or slab wall complete all as specified and as directed

Material and labour for 15 mm bore of pipe Unplasticised PVC pipes of pressure rating 10 kgf/sqcm fixed complete to walls ,ceilings or in floors complete all as specified and as directed

All as per item no:103 here in before but 20 mm bore of pipe

Supply and fix in repairs Cascade type vitreous china wash down water closet pan (pedestal pattern), white, coupled with flushing cistern including 'P' or 'S' trap, seat and cover, fixing bolts etc, connecting to drain pipe and flushing pipecomplete all as specified and as directed.

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 600mm long complete all as specified and directed.

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 450mm long complete all as specified and directed.

Supply and fix in repairs 3 way mixer tap for mixing hot and cold water, fancy type, brass chromium plated screwed down for 15mm bore GI pipe complete all as specified and directed. Make: CAT No. CON-CHR 273 KNUPR of JAQUAR or equivalent model in JOHNSON/ MARC

Supply and fix in repairs 15mm bore stop valves, fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed. Make: Cat No. CON 053 KN of JAQUAR or equivalent model in ESS ESS/ JOHNSON/ MARC

Supply and fix in repairs Brass chromium plated overhead shower set with flange, swivel type, suitable for fixing with 15mm bore GI pipe including CP shower arm, fixed with wall flange all as specified and directed. Make: Cat No. F160039 of HINDWARE or equivalent model in JAQUAR/ JOHNSON/MARC

Supply and fix in repairs Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts and bolts complete all as specified and directed. Make: HINDWARE/ JAQUAR/ JOHNSON

Supply and fix in repairs vitreous china Pedestal type oval wash basin, white, size 550x450mm with waste pipe and waste fitting including CI brackets and cutting for and pinning in ends of brackets or erecting stands, etc. complete all as specified and directed.

Supply and fix in repairs Fancy type pillar taps brass chromium plated with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed down high pressure screwed for 15mm bore GI pipe all as specified and directed. Make: CAT No. CON 011 KN of JAQUAR or equivalent model in JOHNSON/ MARC

Supply and fix in repairs Brass chromum plated toilet paper holder fixed to wall with wooden plugs, chromium plated brass screws and cup washers all as specified and as directed. Make: Cat No. 1151N of JAQUAR or equivalent model in JOHNSON/ ESS ESS.

Supply and fix in repairs Soap dish, vitreous china, white, any type, fixed to wall with CP screws all as specified and as directed.Note :For Baths of 3 cubical in each toilets .

Supply and fix in repairs 15mm bore bib taps, fancy type brass CP with crutch or butterfly handle , screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make: Cat No. CON 107 KN of JAQUAR or equivalent model in ESS ESS/ JOHNSON/ MARC

Supply and fix in repairs health faucet, brass chromium plated with 1m long flexible PVC tube and wall hook complete all as specified and as directed. Make: Cat No. ALD-CHR 563 of JAQUAR or equivalent model in JOHNSON/ MARC

Supply and fix in repairs fancy type towel rod, brass CP, 600mm long, fixed to wall with plugs and chromium plated screws complete all as specified and as directed. Make: CAT No. ACN 1111 SM of JAQUAR or equivalent model in JOHNSON/ ESS ESS

Supply and fix in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed. Make: Cat No. FUS 29041 of JAQUAR or equivalent model in JOHNSON/ MARC

Supply and fix UPVC PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and directed.

Supply and fix in repairs liquid soap container, PTMT, minimum weight 105 gms, fixed to wall with CP screws and wooden/ plastic cleats complete all as specified and as directed.

Supply and fix in repairs75 mm bore UPVC (SWR) pipes, single socketed, in any length, with rubber ring joints laid trenches or in floors complete all as specified and directed.

Supply and fix in repairs 110 mm bore UPVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix in repairs 110mm bore UPVC (SWR) bends any radius all as specified and directed.

Supply and fix in repairs 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix in repairs 75 mm bore UPVC (SWR) bends any radius all as specified and directed.

Supply and fix in repairs UPVC (SWR) gully trap 125/110mm, setting & jointing with solvent cement all as specified and as directed

Supply and fix in repairs 110mm bore UPVC (SWR) vent cowl all as specified and directed.

Material and labour for Prelaminated particle board 18/19 mm thick ,interior grade ,prelaminated one side with decorative choice lamination and other side balancing white lamination ,fixed with screws as in cub boards ,shelves /cabinet works all as specified and as directed

Supply and fix Kitchen sinks of stainless steel 1mm thick with drainage board with plugs ,washers and wastes including bedding in cement mortar to dwarf wall or and fixing cantilever brackets and connecting union to pipe overall size 915 mmx460mm and bowl size 410 mmx330mmx160 mm all as specified and as directed . Make : Nirali/Joyna.

Diamantling water tanks of any description and removing to store of capacity exc 500 litre and not exc 1000 litres all as specified and as directed

Material and labour for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position including testing with 20 mm dia PTMT float valve complete all as specified and directed.

Supply and fix PVC Grating of 150 mm size Make :Prayag/Shakthi Industries

Supply and fix in repair Harrison curtain rails , mild steel chromium plated with fixing brackets ,stops and rollers etc as approved by GE all as specified and as directed

Supply and fix in repairs Brass knob suitable for 35 to 40 mm dia for curtain rod all as specified and as directed

Supply and fix in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm, white, with integral foot rest (excluding flushing cistern) including 'P' or 'S' trap including provision of lime concrete bedding etc complete all as specified and directed.

Supply and fix in repairs vitreous china water closet ,Pedestal type ,white including flush pipe ,seat cover etc including connection to drain pipe (or outgoing pipe) and to flushing pipe ,anti syphonage pipe etc complete all as specified and directed.

Supply and fix in repairs low level PVC flushing cistern, 10 litres capacity, syphonic action type , white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and directed.

Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in any position and removal of debris off the premises and steel scrap taken as credit complete all as specified and directed.

Material and labour for Reinforced cement concrete 1:11/2:3, type A1, using 20mm graded stone aggregate as in slab supported on walls ,beams etc and shelves and similar works complete all as specified and directed.

Material and labour for use and waste of form work to to edges of rough finished concrete flats not exc 20 cm wide horizontal or sloping and similar works exc 10 cm and not exc 20 cm wide all as specified and directed.

Material and labour for use and waste of form work to soffits of suspended slabs such as roof slabs ,floor slabs ,landing and similar work not exc 200 mm thick and similar works for rough finished flat concrete surfaces all as specified and directed.

Material and labour for Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.

All as described in item No. 63 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

Taking down carefully existing point wiring of light/ fan/ bell/ 5 Amps socket/ 15 Amps socket/ 2 way light point, etc. complete of any description including fittings and fixtures such as switches, sockets, call bells, ceiling roses, pendants, holders, regulators, light fittings, etc. and making good the disturbed surfaces of walls, floors, etc and taken as credit complete all as specified and directed.

Taking down old unserviceable sub main wiring of aluminium conductor cable of sizes 2.50,4,6,10 sqmm and taken as credit complete all as specified and directed.

Taking down existing MCCB DB alongwith MCBs and old wooden boards and making good the disturbed surfaces of walls, floors, etc and taken as credit complete all as specified and directed.

Material and labour for Point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including ISI marked PVC casing capping of suitable size and all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular PVC surface box fixing on wall with and including white colour cover plates for mounting modular type switches ,sockets ,fan regulators ,bell pushes etc. for one light point controlled by one switch 1 way complete all as specified and directed. Note :(i) Make of PVC copper cable : Finolex/Polycab/RR Kabel (ii) Make of PVC Casing /capping : Avon Plast/Presto Plast/ Garware

All as described in item No. 150 here in before but for one fan/exhaust point controlled by one switch and regulator

All as described in item No. 150 here in before but one 3 pin 5 amps socket outlet on the same board with other switches

All as described in item No. 150 here in before but for one 05 Amps socket outlet on independent board.

All as described in item No. 150 here in before but complete with 2.5 Sq mm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including ISI marked medium grade PVC casing capping of size 20/25 mm etc fixed on wall/ceiling of suitable size and one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly for 15 amps socket outlet independent complete all as specified and directed.

Material and labour for Sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 6 sqmm drawn through and 1100 volt grade including PVC casing and capping of suitable size with all necessary fittings and provision of one run of 6 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly, including taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces complete all as specified and directed. Note: (i)Two runs of 6 sqmm cable, one run of 6 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length. (ii) Make of PVC copper cable : Finolex/Polycab/RR Kabel (iii) Make of PVC Casing /capping : Poly cab/Presto Plast/ Supreme

Supply and fix modular switch, 1 module, 1 way, 6 Amps, 230 volts, AC, all as specified and directed. Make : Anchor/Legrand /Crab Tree

Supply and fix modular socket outlet, 2 module, 6 Amps 2 / 3 pin combined ,multipurpose all as specified and directed. Make : Anchor/Legrand /Crab Tree

Supply and fix modular socket outlet, 2 module, 16 Amps 2 / 3 pin combined ,multipurpose all as specified and directed. Make : Anchor/Legrand /Crab Tree

Supply and fix modular switch, 1 module, 1 way, 16 Amps, 230 volts, AC, all as specified and directed. Make : Anchor/Legrand /Crab Tree

Supply and fix Ceiling rose ,surface bakelite of size 63.5 x20 mm , 3 terminal suitable for 230 volts AC supply all as specified and directed. Make : Anchor/Legrand /Crab Tree

Supply and fix LED light fitting, 1x 20W, 230V , AC ,decorative box type with driver ,holder including LED tube light connecting up with PVC flexible copper conductor three core cable of suitable length from ceiling complete all as specified and directed. Make: Wipro Garnet 20W or equivalent price and specification in CG/Philips

Supply and fix LED light fitting mirror type with high output diffuser 2 feet length 10 watt 220 v , AC ,decorative type with driver ,holder including LED tube light connecting up with PVC flexible copper conductor three core cable of suitable length from ceiling complete all as specified and directed. Make: Wipro Garnet 10W or equivalent price and specification in CG/Philips

Supply and fix in repairs energy saving surface mounted ,decorative Oval shaped bulk head edge-lit LED luminaire 10 W comprising of high brightness LEDs complete with all accessories internally prewired including provision of 10 watts high brightness LEDs 6000 K,suitable size board with sunmica top and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed. Make: Wipro Garnet 12W LED Bulkhead or equivalent price and specification in CG/Philips

Supply and fix in repair LED street light fitting 35 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 Protection complete all as specified and directed. Make: Wipro Skyline Plus or equivalent price and specification in CG/Philips

Supply and fix ceiling fan with blades ,down rods ,electronic modular regulator and accessories 230 volts, single phase, 1200mm sweep, Minimum air delivery 210CFM with service value 6.00 5 Star rating with brushless direct current motor (BLDC) including taking down existing unserviceable ceiling fan and connections and setting aside for depositing to mes store yard complete all as specified and as directed. Make: Orient /CG/ Bajaj

Supply and fix Exhaust fan, 250mm sweep, 230/240 Volts, 50 hZ , 1200 RPM, heavy duty, single phase, made of sturdy engineering plastic complete with louvers shutter body and fixing arrangements with fixing bolts and provision of 3 core flexible copper conductor cable of size 1.5sqmm size from ceiling rose to connector of exhaust fan and testing including making circular hole of suitable in brick masonry wall and making good disturbed surfaces to match with existing surfaces all as specified as directed. Make: CG /Bajaj.

Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB 20 Amps capacity including taking down existing old one and taken as credit complete all as specified and as directed . Make : Indo Asian/Legrand /L&T

Supply and fix Factory made Epoxy Powder coated Distribution Board Double door TPN 4 ways (VTPN MCB DB ) with metal door ,IP -43 Protection ,fabricated from minimum i.60 mm thick CRCA Sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar ,neutral bar ,standard Din rail ,earth bar and cable ties for cable management ,top and bottom removable gland plates with knockouts and suitable for one Four Pole MCCB/MCB 100/63 Amps as incomer and SP/TP MCBs outgoing complete all as specified and as directed . Make : Siemen/Legrand /L&T

Supply and fix Factory made Epoxy Powder coated Distribution Board Double door SPN 12 ways with acrylic top cover ,IP -43 Protection ,fabricated from minimum 1.60 mm thick CRCA Sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar ,neutral bar ,standard Din rail ,earth bar and cable ties for cable management ,top and bottom removable gland plates with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCB outgoing complete all as specified and as directed . Make : Siemen/Legrand /L&T

Supply and fix in repairs MCCB 4 pole ,125 Amps ,16 KA current rating conforming to IEC-609472 and IS-139473 to be fixed in distribution board complete all as specified and as directed. Make : Siemen/Schneider/ABB

Supply and fix in repairs C series 40 -63 Amps Double Pole MCB complete all as specified and as directed. Make : Siemen/Schneider/ABB

Material and labour for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI wire 4mm dia (7.5m long) by means of GI bolts nuts washers and GI wire protected by 15mm dia light grade GI pipe (7.5m long) and watering arrangements with 20mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

Supply and fix storage type water heater (Geyser), steel body with copper inner tank and heating element upto 2 KW ,vertical type, 25 litres capacity, 2000/1500 Watts, BEE 5 Star Rated including drilling holes into wall, provision of 4 Nos of suitable size anchor bolts, nuts and washers, connecting up electrical & water supply lines, testing complete all as specified and as directed. Make: RACOLD/ BAJAJ/VENUS

Supply and fix PVC Connection 15 mm dia with PTMT nuts of length 300 mm and suitable for hot/cold water supply complete all as specified and as directed.

M/s B C CHOUGULE

M/s. N D KALING

DHANSHRI ENTERPRISES

N K CONSTRUCTION