Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC HIMACHAL BUILDING SHOP NO 10 CD BARFYWALA ROAD JUHU LANE ANDHERI W MUMBAI 400058 | MUMBAI SUBURBAN | MAHARASHTRA | 400058 | L1 | Accepted-AOC AOC | |
| 2 | L2₹36.3 L+₹2.6 L (7.63%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹37.4 L+₹3.7 L (11.1%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹41.3 L+₹7.6 L (22.6%)Rejected-Finance FLAT NO 404 A WING HILL SIDE RESIDENCY BEHIND KIRTI POLICE SOCIETY KATRAP BADLAPUR EAST DIST THANE MAHARASHTRA 451503 | 451503 | L4 | Rejected-Finance BEING NOT L1 | |
| 5 | L5₹44.3 L+₹10.6 L (31.3%)Rejected-Finance | L5 | Rejected-Finance BEING NOT L1 |
Tender Value
₹40.2 L
EMD Value
₹80,300
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (I) (CG) Goa
Garrison Engineer (I) (CG) Goa HQ Coast Guard DHQ-11 Chicolna PO- Bogmalo Goa 403806
REPAIR AND REPLACEMENT OF BER EQUIPMENT AT VARIOUS LOCATIONS UNDER CGDHQ 3 NEW MANGALORE UNDER GE(I)(CG) GOA
2023_MES_590190_1
8373/GOA/E8
Open Tender
Miscellaneous Works
Item Rate
210 days
CGDHQ 3 NEW MANGALORE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Garrison Engineer (I) (CG) Goa
₹80,300
Yes
5 Jul 2023
19 Apr 2023
30 May 2023
19 Apr 2023
27 May 2023
4 May 2023
19 Apr 2023 - 27 Apr 2023
Amount
Supply and installed, testing complete air cooled Split unit Air conditioners Inverter type units indoor/outdoor complete cordless remote control unit with inbuilt air ionizer and plazma filter dust filter for better indoor air quality electric driven single phase of capacity 1.5 Ton ( 5 star rated copper condensor coil EER 3.2) including indoor unit, outdoor unit, remote, battery, manual installator unit, wire, Dehumichifier ISEFR value - 4.73 including 10 years warranty of compressor, refrigarator gas - F- 32 including necessary opening of brick wall (required necessary civil works) for connection of pipe line between indoor and outdoor unit and fixing the indoor/out door unit on wall/ roof with necessary fixing arrangement by providing angle iron bracket etcand finishing good the disturbed surface match with the existing surface including taking down of old unserviceable AC and deposite to MES store complete all as specified and directed. [Note : (a) Cost of copper tubing suction & discharge, control cable in between indoor and outdoor unit upto 3.0 mtrs is deemed to be included in unit rate). (b) Warranty card to be submitted by contractor to Engr -in- Charge for payment.
Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 80/60 with inbuilt UV+RO water purifier including taking down the old unserviceable Water cooler and deposit to MES Store complete all as specified and directed. Note:- Warranty card to be submitted by contractor to Engr -in- Charge for payment.
Supply, installation, testing and commissioning of HT 11 KVoutdoor type oil immersed naturally cooled (ONAN) transformer step down copper wound type of capacity 160 KVA 3 phase, LT -433 Volts, 50 Hz, 4 wire, Level 2 vector group DYN 11 as per IS -1180 LEVEL -2 amendment 4 BIS 1180 / Earlier level 3 with off load changer on primary side to vary secondary voltage with in limit ( +) 5 % to (-) 7.5 % in step o f 2.5 % with cable entry box for HT and LT side all as perIS 1180 Part -1: 2014 with latest amendments including HV & LV cable terminal box with terminals for three phase and neutral on LT side with first fill of transformer oil etc mounted on raised PCC platform all as per OEM specifications including taking down the old unserviceable Transformer and deposit to MES Store. The transformer shall be provided with cable termination box to terminate outdoor type termination of suitable size on HT side 11 KV & LT side 1100 volts. Transformer step down ratio 11000 volts / 433 volts 3 phase 4 wire , impedance as per IS. Oil type ONAN cooled suitable for outdoor installation and double laminations and clamped to minimize vibrations and noise. The winding shall be copper and shall be designed for full load current and withstand the thermal and electro -magnetic stresses arising due to the through fault current vector group shall be DY n 11 including supply of all standard fittings / fixtures and comprising of the followings complete all as specified and directed. (a) HT cable termination box (b) LT cable termination box (c) Rating & Diagram plate (d) Earthing terminal (e) Lifting lugs (f) Oil level indicator with minimum level marking (g) Thermometer Pockets (h) Conventional conservator with oil filling hole with cap and drain plug (j) Air release plug (k) Silica Gel breather (l) Off circuit tap changer (m) Bi - directional Rollers (n) JAcing Pads (o) Radiators / Fins ( epoxy painted)
Supply, installation, testing and commissioning of HT 11 KVoutdoor type oil immersed naturally cooled (ONAN) transformer step down copper wound type of capacity 250 KVA 3 phase, LT -433 Volts, 50 Hz, 4 wire, Level 2 vector group DYN 11 as per IS -1180 LEVEL -2 amendment 4 BIS 1180 / Earlier level 3 with off load changer on primary side to vary secondary voltage with in limit ( +) 5 % to (-) 7.5 % in step o f 2.5 % with cable entry box for HT and LT side all as perIS 1180 Part -1: 2014 with latest amendments including HV & LV cable terminal box with terminals for three phase and neutral on LT side with first fill of transformer oil etc mounted on raised PCC platform all as per OEM specifications including taking down the old unserviceable Transformer and deposit to MES Store. The transformer shall be provided with cable termination box to terminate outdoor type termination of suitable size on HT side 11 KV & LT side 1100 volts. Transformer step down ratio 11000 volts / 433 volts 3 phase 4 wire , impedance as per IS. Oil type ONAN cooled suitable for outdoor installation and double laminations and clamped to minimize vibrations and noise. The winding shall be copper and shall be designed for full load current and withstand the thermal and electro -magnetic stresses arising due to the through fault current vector group shall be DY n 11 including supply of all standard fittings / fixtures and comprising of the followings complete all as specified and directed. (a) HT cable termination box (b) LT cable termination box (c) Rating & Diagram plate (d) Earthing terminal (e) Lifting lugs (f) Oil level indicator with minimum level marking (g) Thermometer Pockets (h) Conventional conservator with oil filling hole with cap and drain plug (j) Air release plug (k) Silica Gel breather (l) Off circuit tap changer (m) Bi - directional Rollers (n) JAcing Pads (o) Radiators / Fins ( epoxy painted)
Supply, Lay, Testing and commissioning UG cable XLPE insulated screened armoured PVC bedded galvanized flat steel strip (A2XFY/2XFY) electric power cable 6.35 KV (UE) /11 KV (E) 11000 volts grade (Earthed) conform to IS 7098 Part - 2 with stranded aluminium conductor of size 3 core 95 Sqmm including taking down the unserviceable cable complete all as specified and directed.
Supply, lay, testing and commissioning UG cable 3.5 core 240 SQMM XLPE insulated, armored heavy duty electric cable, 1100 volts grade with stranded aluminium conductor in trenches including suitable size of double grip cable gland and joiinting etc including taking down the unserviceable cable complete all as specified and directed.
Excavation in trenches not exc 1.5m in wide and not exc 1.5 m in depth and getting out in hard/dense soil for laying of cables complete all as specified and directed.
Returning, filling in, including spreading , levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.
Supply and lay fine sand cushion in trenches for cable protection, spreading, levelling, Punning and consolidating complete all as specified and directed. [Note:- Only Punned hence shall be considered for measurement]
Supply and laying un re-inforced precast concrete cable cover, class LV, type-I flat, size 250 mm x 150mm x 40mm / Factory made in trenches over and across the cable complete all as specified and directed.
Supply and laying un re-inforced precast concrete cable cover, class HV, type-I, flat size 300mm x 180mm x 40mm factory made in trenches over and across the cable complete all as specified and directed.
S & F cable jointing kit for 11 KV grade cable for in door termination, heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 to 120 Sqmm complete all as specified and directed.
S & F cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 95 to 120 Sqmm complete all as specified and directed.
Supply & install fixing & testing complete Wall mounting Voltage stabilizer 1 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stablized at 230 V with accuracy of +/- 2.5% and of suitable capacity for up to 1.5 Ton ACs with digital voltmeter, time delay relay including fixing/hanging on wall (required necessary civil works) with necessary fixing arrangement and finishing good the disturbed surface including taking out old unserviceable stabilizer and deposite to MES store complete all as specified and directed [Notes : Warranty card to be submitted by contractor to Engr -in- Charge for payment.]
Supply & install fixing & testing complete Wall mounting Voltage stabilizer 5 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stablized at 230 V with accuracy of +/- 2.5% and of suitable capacity for up to 1.5 Ton ACs with digital voltmeter, time delay relay including fixing/hanging on wall (required necessary civil works) with necessary fixing arrangement and finishing good the disturbed surface including taking out old unserviceable stabilizer and deposite to MES store complete all as specified and directed [Notes : Warranty card to be submitted by contractor to Engr -in- Charge for payment.]
Supply, install, test and commissioining pump set centrifugal monoblock three phase electric driven motor on AC 415 Volts of capacity 8.3 LPS at 24 Meter head, bronze impeller complete ,"B" class insulation including PCC foundation, GI suction pipe of suitable size and foot valves, priming arrangement, pressure gauges etc complete including taking down the old unsv AC Motor and deposit to MES Store complete all as specified and directed. Notes : Warranty card to be submitted by contractor to Engr -in- Charge for payment.] [Make : Kirloskar Model No KDS 538+ or similar make mentioned in Particular specifications]
S & F in repairs Corrosion resistant copper DOL Starter suitable for 5 HP, 3 Phase monoblock pump with inbuild thermal load preventor, power rating 3.7 KW, power supply 7A, 10A & motor power 5 HP centrifugal, adjustable type complete all as specified and directed. [Notes : Warranty card to be submitted by contractor to Engr -in- Charge for payment.]
M & L Earthing complete with galvanized iron earth plate electrode 600 x 600 x 6.0mm thick buried directly in ground( earth pit not less than2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level ,connected to galvanized iron strip of size 32x6mm as earthing lead by means of nuts and bolts check nuts and washers of galvanized iron connected to test point, GI tubing 40mm bore medium grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt,Ci cover with suitable handle, PCC pit 1:2:4 including earth work in any type of soil and connecting to earthing test point/panel and testig on completion all as shown on electrical plate No -3 of SSR 2009- Part 1 complete all as specified and directed.
S & F Electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including taking down the old unserviceable water heater and deposit to MES Store complete all as specified and directed. [Notes : Warranty card to be submitted by contractor to Engr -in- Charge for payment.]
S & F Ceiling Fan complete accessories 230 V,1200 mm sweep. BEE 5 star rated including provision of cable from ceiling rose or connector to ceiling fan including taking down old one and deposting old fan to MES store etc complete all as specified and directed. Note : (a) Old unserviceable ceiling fan shall be deposited to MES store yard (b) Warranty card to be submitted by contractor to Engr -in- Charge for payment.
Supply, Install, testing and commisioning outdoor floor mounted thermoplastic polycarbonate feeder pillar panel Size- 2300x1650x795mm including taking down the unserviceable panel Bus Bar rating 400A complete all as specified and directed. INCOMING:- (a) 400Amps FP 36KA MCCB[O/L , S/C] - 1 Nos (b) R/Y/B indicating Lamp 230V AC - 1 No (Incoming) (c) VAF Meter- 1 Nos (d) Control Fuse with Base 32/2A - 3 Nos (e) 400/5A Current Transformer - 3 Nos OUTGOINGS:- (a) 100A FP 36KA MCCB[O/L, S/C] - 2 Nos
Supply, Install, testing and commisioning outdoor floor mounted thermoplastic polycarbonate feeder pillar panel Size 1100x1950x690mm including taking down the unserviceable panel . Bus Bar rating 250A complete all as specified and directed. INCOMING:- (a) 160Amps FP 36KA MCCB - 1 Nos (b) R/Y/B indicating Lamp 230V AC - 1 No (c) Digital MFM Current Transformer/ Control Fuse with base OUTGOINGS:- (a) 100A FP 25KA MCCB - 4 Nos (b) 63A FP 25KA MCCB - 2 Nos (c) 100A FP Change Over Switch(COS) - 1 Nos
S & F HT 11 KV, triple pole out door type gang operated air-break switch suitable for horizontal or vertical mounting fixed type complete with 9 insulators of rating upto 200 Amps complete all as specified and directed.
Supply and lay GI pipe light grade as cable protection laid on trench/floor, fixed on pole/wall etc of following sizes complete all as specified and directed.
(a) 100 mm dia
VITTAL P NAYAK
KDR CONSTRUCTION
M/S SOMANATH ENTERPRISES
SIRI SALES AND SERVICES
Gee Kay Projects
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .