Providing Additional infrastructure Facilities In PDS Shop at Ward No. 05 Fathima Nagar in Zone-1 TCMC

Amount

Providing of Granular Sub base using Grade I materials of table 400 -1 of Morth with minimum CBR 30 spreading in uniform layers with motor grader on prepared surface, mix in by palce method at OMC and compacting with Vibratory Roller to achieve the desired density including all labourcharges etc, complete as per technical specification and as directed by the departmental officers. Morth - Rev V No. 111,112,401,900

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Supply anddelivery of 2 HP 20LPM x 90m clear water vertical wet type submersible pump conforming to IS 8034/2002 and as amended there after and BEE 3 Star Rated capable of discharging note LPM against head of water column due to all causes.The pump shall be with stainless steel shaft and dynamically balanced bronze or CastS Simpeller, brass screws and CIF G200 grade pump bowl/diffuser with ISI mark.The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor suitable for operation in AC single phase 230 V+/- 10 %,50 HZ +/-5 %

Supply and delivery of Single Phase 2Hp direct online starter confirming to IS13947, IEC60947-1andasamended thereafter with suitable KW rating for operation in AC/single Phase/50HZ(±5%) and 230 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16Amps 2pole Magnetic Contactor with under Voltage protection, Indication lamp,starting capacitor, running capacitor and On/Off Push button switches, 5way connector, wiring with 1sq.mm/1.5sq.mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

Charges for conducting Geophysical survey etc direction by the Departmental officers

Supply of 150 mm (Casing Shollow depth) 1.2 PVC Casing pipe with exces duty as per IS 12818/1992 (TWAD Rate 2012-14 Page No16)

Supply of 200/250 mm (Casing Shollow depth) 1.2 PVC Casing pipe with exces duty including labour charges for inserting of PVC casing pipe as per IS 12818/1992 (TWAD Rate 2012-14 Page No16)

Drilling of 150mm dia borewells in hard rock areas anywhere in Tamil Nadu including trasportion to the worksite in hard rock areas and developing the borewells

Supply of 32mm HDPE Pipe for Sub-Mersible pump in Bore well Class-5 (1 Mpa or 10 kg/cm2 pressure) (As per PWD year 2012-13 Sl.No 159 D C Page No.60)

Supply of 4.0Sqmm PVC insulated and Sheathed 3 core flat type copper cable confirming to IS 694/1990 rates are Including excies duty As per TWAD Sch.2012-13 Page No.100

Supply and delivery of Following PVC and GI Specials etc., complete as per standard specifications

25mm PVC Pipe

UPVC Tap

32mm GI Borewell Clamp

25 mm SS X Nipple

32 Amps Single Phase Main Box

Earth link SD-234

32mm Hose Coller

Nylon Rope

Wooden Board

25mm Flange

10Amps MCB

7/20 Wire (2x6sq.mm SD-66)

32x20mm GI Elbow

32mm PVC Pipe

32mm PVC Elbow

32mm PVC MTA

32mm PVC Tee

32mm Ball Valve

32mm PVC Coupling

32x20mm PVC Coupling

15mm GI Nipple

25x15mm PVC Elbow

25mm GI Pipe

Supply and fixing of GI Sheet EB Box

20mm PVC Tee

20mm PVC Elbow

20Amps Isolator

20Amps MCB

25mm PVC Bend

20mm PVC Pipe

32Amps Rewirable fuse Unit

20mm GI Pipe

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supply and Delivery and fixing 1.20 Diameter RCC Rings including Loading and unloading Charges etc complete

Supply and delivery and fixing of 1000 Litres HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

SIVTHANYA ASSOCIATES (BID ID -1205574)