PROVISION OF SOUND PROOFING OF COMMUNITY HALL AND STAINLESS STEEL LADDERS FOR ROOF TOP AT CERTAIN PLACES AT CGRA PARADIP UNDER GE (I) (CG) BHUBANESWAR)

Amount

Supply and fixing Acoustical Wall Panelling’ with square edges made of fibre glass substance 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class A as per ASTM E-84, fabric with an option of colors – Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut & Shell as per the choice of the GE of size 600X1200 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers and construction adhesives as per the instructions laid down by the manufacturer. INSTALLATION: 4Nos. wall GI panel Impalers shall be fixed to the wall surface using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained.Installation to be carried out by manufacturers Trained Installation team & Installation should be carried out as per recommended procedure of manufacturers complete all as specified and directed. Make : Armstrong/Diamond/Saint Gobain

Supply and fixing vertical roller wooden blind of any colour complete with all its accessories fixed to wall with screws complete all as specified and directed.

S & F stainless steel (Grade 304) section for ladder made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (wherever required) and fixing the same with necessary stainless steel nuts, bolts etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L PCC type B-1, (1:2:4) using 20mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L Rendering 10mm thick on fair faces of of brick work or concrete surfaces in CM (1:6) finished fair & even without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Taking down chowkats or frame exceeding 1.50 Sq.m but n.exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Supply and fixing factory made uPVC white colour Casement door /cupboards 30/35mm thick with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking best quality sliding bole 250mm dia having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing UPVC glazed door made out of hollow chambered UPVC sections having isolated drainage and reinforced throughout with galvanised steel the corners shall be mitre cut and fusion welded and grooved for aesthetic finish. the outer frame of the bug mesh system shall be made out of UPVC sections having an overall size of 60 mm x48 mm (only on hinge side) and must have wall thickness of 2.2 mm. They shall be provided with "C" type section, galvnised steel throughout the sections (except corners) of minimum 2mm thickness and having the dimensions 25mm x 14mm. Two humbers horizontal T-mullion of size 76mm x 60 mm shall be provided to add strength. The glazing provided shall be of an epoxy coated SS mesh. The but mesh system shall be complete with all necessary hardware like C handle alongwith aldrop the fixing of bug mesh on the putty/plastered wall shall be with the help of nylon fasteners having size of 8 mm x 100mm (brick wall only). All gaps on the sides of window after fixing shall be closed with the help of weather sealants/silicones/gap fillers (cannot be done where excessive tapering is found). The brand of UPVC shall be Plastone (T-60 series) of equivalent as approved by GE complete all as specified and directed.

Material and labour for Cutting holes in brick walls exc. half brick thick but not exc.one brick thick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Material & labour for applying two coat of oil bound distemper on new plastered surface of wall complete incl filling putty/filler work where ever depression found in wall complete all as specified and directed.

Supply and fix Track mounted LED Light with modern design, compact size with high power COB LED to provide focussed light, track light is a method of lighting where light fixtures are attached anywahere on a continuous track rail which is electrically charged as compared to the need of routing electrical wiring to individual light position complete allas specified and directed. Make: Havells cat Part No UNECOTRACKLIGHTTS30WLED857S60BLK or equivalent in Philips/Crompton

Supply and fix Track based Spot light with high efficiency reflector makes it ideal for lighting - up retail spaces with bright and crisp light throw suitable for 3 circuit -4 wire universal tracks. complete all as specified and directed. Make: Havells cat Part No SCUBA35W865S55DWHT or equivalent in Philips/Crompton

Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size FRLS PVC insulated unsheathed cable 1100 Volt grade, conforming to IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed coduit, including cutting chases and making good disturbed surface complete, including single core solid FRLS conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified and directed.

(a) One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No 15 here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

S&F Modular Type 240V, 450W, one module dimmer complete all as specified and as directed.

S&F Modular White Cover Plate with Frame including metal flush box, 4 Module complete all as specified and as directed.

Taking Down Modular type Switch Socket 6A/16A Amps & AC Sswitch Socket and refixing after complete of Wall Panneling complete all as specified and as directed.

Taking Down Modular type Switch 6 Amps and refixing after complete of Wall Panneling complete all as specified and as directed.

Taking Down White Modular Cover Plate of 6/8/10 Module and refixing after complete of Wall Panneling complete all as specified and as directed.

Talking down Split Air conditioning 1.5 TR indoor Unit and after compete the civil work refixing the same air conditioning on same place including connected acessories complete all as specified and directed .

SMART ENERGY SOLUTIONS

ANAND CHANDRA DAS

M/s RABINDRA KUMAR MALLICK

RANA ENTERPRISES

boon construction company