REPAIR TO VARIOUS WOODEN FURNITURE AND POLISHING OF WOODEN FURNUTURE UNDER BSO(SOUTH) OF GE(SOUTH) MEERUT CANTT

Amount

Chair Wooden Bottom (Drg No FD-225). Supply and fix seat to be made of ply wood commercial 6mm thick BWR, grade ISI ply, shape and size as per Drg and to be fixed with 20mm long screw wood complete all as specified and directed.

Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No. 2.00 above but rear leg.

All as per item No 2.00 above but front rail.

All as per item No 2.00 above but back rail.

All as per item No 2.00 above but side rail.

All as per item No 2.00 above but back Rest.

All as per item No 2.00 above but stiffener.

All as per item No. 2.00 above but wooden cleat.

Polishing : Material and labour for Scrapping of old polish and dirt from the surfaces of wooden furniture by means of electric grinder using appropriate sand paper, preparation of surfaces as described in PS and applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge.

Chair Easy (Drg No FD-229, 17). Supply and fix front leg new made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 11.00 above but rear leg .

All as per item No 11.00 above but front rail .

All as per item No 11.00 above but back rail .

All as per item No 11.00 above but side rail .

All as per item No 11.00 above but arm rest .

All as per item No 11.00 above but batten rail under seal frame

All as per item No 11.00 above but fillets for caning seat and back .

Material and labour for canning for seat and back: Canning shall be done with plastic cane 2mm wide half round for seat and 3mm wide for border in white colour 0.4mm thick weighing not less than 6 gms per 10 running meter in true "godrej pattern" all as shown on drawings. Holes for caning shall be 12.5 mm centre to centre and complete all as specified and directed. (Make : Premier/Shah or as approved by GE only).

All as per item No. 11.00 above but wooden cleat.

Polishing : All as per item No 10.00 above but for chair easy.

Chair Dining (Drg No FD-229/228/FD/MAP-II/05). Supply and fix new front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 22.00 above but rear leg .

All as per item No 22.00 above but front rail .

All as per item No 22.00 above but back rail .

All as per item No 22.00 above but side rail .

All as per item No 22.00 above but back rest .

Removing of unserviceable PVC sheet from chair dining and making suitable for canning as per DRG FD-279 by making holes for canning complete all as specified and directed.

Canning for seat : All as per item No. 19 above but seat of chair dining.

All as per item No 22.00 above but stiffener .

All as per item No. 22.00 above but wooden cleat.

Polishing : All as per item No 10.00 above but for chair dining.

Chair Writing (Drg No FD-20/280). Supply and new fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 33.00 above but rear leg .

All as per item No 33.00 above but front rail .

All as per item No 33.00 above but side/back rail .

All as per item No 33.00 above but back rest .

All as per item No 33.00 above but stiffener .

All as per item No 33.00 above but arm rest .

All same as per item No. 33.00 above but wooden cleat.

Canning for seat : All as per item No. 19 above but seat of chair writing

Polishing : All as per item No 10.00 above but for chair writing.

Stool Dressing (Drg No FD-20/280). Supply and fix leg new made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 43.00 above but front rail.

All as per item No 43.00 above but side rail .

All as per item No 43.00 above but stiffener .

Polishing : All as per item No 10.00 above but stool dressing.

Table 3'x2' with/without Drawer (Drg No FD-41/42/231/224/283 & 284. Supply and fixing new top of required in repair of size 18-19 mm pre-laminated MDF board in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded complete all as specified and directed.

Supply and fix new leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 49.00above but long rail .

All as per item No 49.00 above but short rail .

All as per item No 49.00 above but long stiffener .

All as per item No 49.00 above but short stiffener .

Drawer : Drawer shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and provided with recessed handle of best quality as approved. Bottom of drawer shall be made of one side melamine faced pre-laminated MDF board 6mm thick complete all as specified and directed.

All as per item No. 49.00 above but wooden cleat.

Polishing : All as per item No 10.00 above but for table 3'x2' with drawer except top.

Polishing : All as per item No 10.00 above but for table 3'x2' without drawer except top.

Table 3'x3' (900x900x760mm) Drg No FD-88 & 291. Top: All as per ser item No. 48.00 above but for table 3'x3'.

Supply and fix leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 59.00 above but top rail.

All same as per item No. 59.00 above but wooden cleat.

Polishing : All as per item No 10.00 above but for table 3'x3'.

Table Writing( Drg No FD-33,249 & 275). Top : All as per ser item No. 48.00 above but top of table writing

Supply and fix leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 64.00 above but short rail .

All as per item No 64.00 above but leg .

All as per item No 64.00 above but stiffener .

All as per item No 64.00 above but bottom rail of table writing.

Supply and fixing of shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable stainless steel knob 40mm dia as approved with lock and suitable catcher complete all as specified and directed.

Supply and fixing of sides and bottom of cup board : It shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg complete all as specified and directed.

Supply and fixing of back of cup board : It shall be made out of 6mm thick plywood BWR grade confirming to IS as approved to be fixed as shown on drg complete all as specified and directed.

Supply and fixing of partition of the cup board made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg and as approved and complete all as specified and directed.

All as per item No 54.000 but Drawer of table writing

Polishing : All same as per item No 10.00 above but for table writing except top and laminated surfaces.

Hat Stand with mirror (Drg No FD-23 & 361). Supply and fix looking Mirror size 440x300x6mm duly fixed with beading size 35x6mm made out of well seasoned teak wood duly finished as shown on drg complete all as specified and directed.

Supply and fixing of aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long as shown on drg .

Supply and fix of rawl plug as per drg and approved sample shall be fixed to the back of the hat stand as shown on the drg complete all as specified and directed.

Supply and fix of beading made out of well seasoned teak wood size 35x6mm all around shall be provided to the frame of hat stand as shown on drg complete all as specified and directed.

Supply and fix of plywood 4mm thick commercial confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the back side of hat stand all as shown on drg and as directed by Engr-in-charge complete all as specified and directed.

Supply and fix of plywood one side teak face 4mm thick commercial confirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand all as shown on drg complete all as specified and directed.

Polishing : All as per item No 10.00 above but for hat stand with mirror (Except mirror).

Table Dining 6/8 pers (Drg No FD-30, 273 , 376 & FD/MAP-II/03). Top for table dining 6 pers : All as per ser item No 48.00 above but suitable for table dining 6 pers.

Top for table dining 8 pers : All as per ser item No 48.00 above but suitable for table dining 8 pers.

Supply and fix long rail for table dinng 8 Pers in repair made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

Long rail of table dining 6 pers : All as per ser item No. 84.00 above but suitable for table dining 6 pers..

Short rail of table dining 6 pers : All as per ser item No. 84.00 above but short rail.

Leg : All as per item No. 84.00 above but leg.

All as per item No. 84.00 above but wooden cleat.

Polishing : All as per item No 10.00 above but for table dining 6 pers.

Polishing : All as per item No 10.00 above but for table dining 8 pers.

Bed Plywood top (Drg No FD-21M/246). Supply and fixing of plywood : Top of the bed to be made of plywood commercial 12mm thick 5 ply MR grade conforming to IS 303-1989 in one piece after taking out the old one and to be fixed with 35mm long screw wood steel ISI marked all as specified in drg complete all as specified and directed.

Supply and fix legs made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg after removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 92.00 above but Long Rail.

All as per item No 92.00 above but Short Rail.

All as per item No 92.00 but stiffner ( center support) .

Supply and fix of head rest : Outer and inner side ply to be replaced by 4mm thick ply wood one side teak face confirming to IS: 303-1989 including teak wood beading all round and 1/2 cut 12 mm dia beading made to shape as shown on drg complete all as specified and directed..

All same as per item No 96.00 above but foot rest for bed ply wood top.

Supply and fix of head rest complete as per drg alongwith legs to the bed wherever required Specification for ply wood 4 mm thick one side teak face shall be provided complete all as specified and directed.

All as per item No 98.00 above but foot rest for bed ply wood top.

MS Clamp : Supply and fix MS Flat iron clamp size 150x30mm , 5mm thick made to shape as per drg to be fixed with 6 Nos of screw wood steel 35 mm long ISI marked duly painted with paint synthetic enamel black over a coat of primer complete all as specified and directed.

Polishing : All as per item No 10.00 above but for bed plywood top.

Almirah Mess Utensil (Drg No FD-93). Material and labour for fixing new top of required size made of 18-19mm thick prelaminated MDF board of approved colour/shade exterior grade duly post-formed (PFT) with 0.6mm thick laminates including 2mm thick PVC edging shall be fixed on sides with string bonded complete all as specified and directed.

All as per item No 102.00 above but for bottom .

All as per item No 102.00 above but for side of almirah mess utensil as per drg.

All as per item No 102.00 above but for back side of almirah mess utensil as per drg.

Supply and fix of door shutter : All as specified above item No 69.00 above but for door shutter of almirah mess utensil as per drg complete all as specified and directed.

All as per item No 102.00 above but shelf of almirah mess utensil as per drg.

Supply and fix of handle 100mm long aluminum 'D' type as approved shall be provided to the door shutter as shown on drg and complete all as specified and directed.

Hasp and stapple 100mm long aluminum of approved quality ISI marked shall be provided to the door shutter of the almirah all as shown on drg .complete all as specified and directed.

Catcher ball spring magnetic suitable for door superior quality as approved shall be fixed all as shown on drg complete all as specified and directed.

Supply and fix Aluminium tower bolt 50mm long inside one of the shutter complete all as specified and directed.

Side Board (Drg No FD-241/371). Removing of unserviceable top, making to size fixing new top of required size made of 18-19mm thick prelaminated MDF board in colour/shade as approved by GE including 2 mm thick PVC edging shall be fixed on sides with string bonded complete all as specified and directed.

All as specified above item No 112.00 above but for bottom of side board

All as per item No 112.00 done but sides for side board.

Supply and fix of door shutters as per item No 69.00 above but suitable for side board as per the drg complete all as specified and directed.

Supply and fix of drawer as per item No 54.00 above but suitable for side board as per the drg complete all as specified and directed.

Supply and fix of back made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece complete all as specified and directed.

Supply and fix Leg made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable groving with long/short frame complete all as specified and directed.

All as per item No 118.00 above but long stiffener .

All as per item No 118.00 above but Short stiffener .

Table Dressing Gents with mirror. Mirror : Supply and fix mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots duly french polished. Mirror shall be of electro copper plated polished sheet glass 6 mm thick suitable rawl plug heavy duty as per drg 2 Nos shall be provided to the back of the mirror for hanging. Back of the frame shall be of plywood commercial 6mm thick BWR grade confirming to IS as approved and as shown on drg complete all as specified and directed.

Drawer with knob : All as per item No 54.00 above but suitable for Table dressing gents with mirror as per the drg.

Supply and fix table top made of both side melamine faced pre-laminated MDF board 12mm thick confirming to IS in Baverian beach shade in one piece after removing the old one. Edging alround made of teak wood beading 4mm thick duly polished shall be provided all around complete all as specified and directed.

All as per item No 123.00 above but side of table dressing gents.

All as per item No 123.00 above but bottom of table dressing gents .

Back : Back shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece after removing the old one. suitable rawl plug as per drg 2 Nos shall provided to the back for hanging .

Table Dressing Ladies with mirror (Drg No FD-32(M)/251). Supply and fix of mirror : All as per item No 121.00 above but suitable for Table dressing ladies with mirror as per the drg complete all as specified and directed.

Drawer with knob : All as per item No 54.00 above but suitable for Table dressing ladies with mirror as per the drg.

Top : All as per item No 123.00 above but suitable for Table dressing ladies with mirror as per the drg.

Side : All as per item No 123.00 above but suitable for Table dressing ladies with mirror as per the drg.

Bottom : All as per item No 123.00 above but back of table dressing ladies.

Back : All as per item No 126.00 above but back of table dressing ladies.

Sliding glass shutter made of 5mm thick plain glass alongwith 2 nos runner of best quality shall be fixed in bottom side of each glass for smooth function. Standard aluminum channel having two U shaped for sliding of plain glass also shall be fixed alround wherever required as per drg and complete all as specified and directed.

Long stiffener made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable no of screw wood steel complete all as specified and directed.

Short Stiffener : All as per item no. 134.00 above but short stiffener of table dressing ladies.

Leg : All as per item no. 134.00 above but leg of table dressing ladies.

Table Centre (Drg No FD-274). Top : All as per item No. 48.00 above but top of table centre.

Supply and fix of leg made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one per drg without damaging the other parts complete all as specified and directed.

Long rail : All as per item No 138.00 above but long rail for table centre.

Short rail as per item No 138.00 above but short rail for table centre.

Polishing : All as per item No 10.00 above but for table centre.

Teapoy (Drg No FD-232/382/34M). Top : All as per item No 48.00 above but for teapoy.

Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts complete all as specified and directed.

All as per item No 143.00 above but long rail for teapoy.

All as per item No 143.00 above but short rail for teapoy.

: All as per item No 143.00 above but stiffener for teapoy.

Polishing : All as per item No 10.00 above but for teapoy.

Peg Table (Drg No FD-25M/277). Top : All as per item No 48.00 above but for Peg table.

Supply and fix of leg made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts complete all as specified and directed.

All as per item No 149.00 above but long rail for Peg table.

All as per item No 149.00 above but short rail for Peg table.

All as per item No 149.00 above but stiffener for Peg Table.

Polishing : All as per item No 10.00 above but for Peg table.

Book case Drg No FD - 45/237(M). Top : Top shall be made of both side melamine faced pre-laminated MDF board 18 mm thick confirming to IS in Baverian beach shade in one piece. Edging alround with 4 mm thick teak wood beading finished with french polish shall be provided complete all as specified and directed.

All as per item No 154.00 above but bottom for side board.

All as per item No 154.00 above but sides for side board.

Shutters complete with knob and lock : shutter shall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shade as per drg duly fixed with paino type hinges and suitable stainless steel knob 40mm dia as approved with lock and suitable catcher complete all as specified and directed.

Back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece complete all as specified and directed.

Supply and fix long stiffner made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts complete all as specified and directed.

All as per item No 159.00 above but short stiffener .

All as per item No 159.00 above but leg.

Chair Dining Offr (Drg No FD/MAP-II/04). Supply and fix new front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes , shape and size as per Drg including removing the old/broken one without damaging the other parts complete all as specified and directed.

All as per item No 162.00 above but rear leg .

All as per item No 162.00 above but front rail .

All as per item No 162.00 above but back rail .

All as per item No 162.00 above but side rail .

All as per item No 162.00 above but back rest .

Supply and fix ply wood commercial 8mm thick with cushion 75mm 40 density including tapestry cloth not less than Rs 250/RM complete all as specified and directed.

All as per item item No 162.00 above but stiffener .

All as per item No. 9.00 above but wooden cleat.

Polishing : All as per item No 10.00 above but for chair dining.

Chair Medium (APS) (Drg No CWE/MRT/wd/488 sheet 1/1). Supply and fix in repair seat made of ply wood commercial 12mm thick BWR, grade ISI marked ply and to be fixed with mica sheet 1mm thick colour as approved and 20mm long screw wood steel complete all as specified and directed.

Supply and fix front leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts complete all as specified and directed.

All as per item No 173.00 above but rear leg.

All as per item No 173.00 above but front rail.

All as per item No 173.00 above but back rail.

All as per item No 173.00 above but side rail.

All as per item No 173.00 above but back Rest.

All as per item item No 173.00 above but stiffener.

All as per item No. 173.00 above but wooden cleat.

Supply and fix of hard PVC shoes of approved quality shall be fixed to the various types of wooden chairs, peg table, ceter table and teapoy for the bottom of the legs with 20mm long screw wood steel ISI marked.

Polishing : All as per item No 10.00 above but for chair medium (APS)

Table Double Seater with Box (APS) (Drg No CWE/MRT/WD/487 sheet 1/1. Supply and fix of top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm plywood duly covered with 1mm thick mica side with laminates in colour/shade as approved by Engineer-in-Charge. 4-5mm half round teawood edging shall be fixed on sides with string bonded complete all as specified and directed.

Supplyl and fix new front leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing the old damaged/broken one as per drg without damaging the other parts complete all as specified and directed.

All as per item No 184.00 above but long rail .

All as per item No 184.00 above but short rail .

All as per item item No 184.00 above but stiffener .

Supply and fix of box made out of one side laminated 18mm thick plywood confirming to IS in baverian beach shade as per approved drg.

All as per item No. 173.00 above but wooden cleat.

Supply and fix of hard PVC shoes of approved quality shall be fixed to the various types of wooden tables for the bottom of the legs with 30mm long screw wood steel ISI marked complete all as specified and directed.

Polishing : All as per item No 10.00 above but for table except top.

Sunny Furniture Centre