General repair with replacement of defective parts of Snow Clearance machine Guru-II

Amount

Periodic oil service of the machine by draining the old one and then P/F of new M.oil -15 litres, Engine oil filter-01 no., Diesel filter(Pry. And Sec. )-01set, Air filter- 01 set, Hydraulic oil filter-01 set, water separator-01 no. Complete job including cost of material, labour charges , tools and tackles required to execute the job.

Repairs to the electrical system by way of damaged wires with new ones, also replacement of damaged fuses, lights with new ones. The job also includes replacement of damaged wiper blades. Complete job including cost of material,labour charges, tools and tackles required to execute the job.

Replacement of damaged hydraulic pipes of the machine by way of removal of old damaged ones and then P/F of new hydraulic pipes -03 nos. of required length and specification with new ones. The job also includes topping up of hydraulic oil -05 litres and then testing the hydraulic system on load for any leakages. Comolete job including cost of material, labour charges, tools and tackles required to execute the job.

Repairs to the radiator by flushing upper and lower tanks with caustic soda, removal of any impurities. Also repairs to the fuel system by servicing of fuel tank by way of its cutting and then gas welding,replacement of fuel pipes with banjo bolts and washers with new ones

Repairs to the fuel system of the truck by way of washing its fuel tank after its complete dismantling, replacement of damaged fuel pipes/banjo bolts with banjo washers, also calliberation of injectors, setting of their pressure on machine, replacement of feed pump, complete job including cost of material and labour charges.

Repairs to the attachment of the blade of Machine by way of dismantling it from the machine, extraction of the frame of blade and its repairing by way of removal of the damaged/cracked metal supports of the frame making use of gas cutter and fitment of the new M.S. plates of the reqd. size using electric welding, to give additional strength to the frame / attachment so that it can withhold the weight of the blade easily during working in tough conditions. The job includes cost of material (M.S. Plates of assorted size), gas welding, electric welding, welding electrodes, and hire charges of the other tools & tackles reqd. to complete/finish the job. The job also includes p/f of nut-bolts of the assorted size. Complete job.

N B Engineering and Electric Works

M/S FASTTRACK ENGINEERS