8257 REPAIRS TO ROOF, PLUMBING, JOINERY, FLOORING, PLASTERING, PATH AND CONNECTED ITEMS TO CERTAIN BLDGS AT CHSC, CMDC, SHO, GE OFFICE, BSO, AGE EM UNDER AGE BR II SOUTH PUNE

Amount

Demolition of PCC of any description and in any position not other wise specifically provided for.

Dismantling wall and ceiling boards, any thickness, including cover fillets complete all as specified and directed.

S&F for Gypsum ceiling board for ceiling of approved pattern finish 595x595x9 to 9.5mm thick in size of approved brand/make, laid over and including grid work of size 600x600mm, made out of 0.5mm thick GI tee 32x24mm for main, 25x24mm for cross tee and 20x20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle, hung from ceiling using 2mm thick GI suspension wires spaced at 1200mm on main runners including making nitches for fans/light at as specified and directed

S&F in repairs 4mm thick plain AC sheet in ceiling including three coats of white wash complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

S&F 0.60 mm thick grade 'O', GI corrugated mild steel sheeting with grade 'B' corrugation, zink coating @ 120 GSM inclusive of both side, laid with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook in roof all as specified.

S&F 0.80mm thick PGI mild steel sheets with zinc coating @ 120 gm/sqm inclusive of both side as in ridge, hips, valley, gutters and straight flashings complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of AC sheet corrugated or semi corrugated in roof covering complete all as specified and directed.

M&L for 6mm thick asbestos cement corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washers etc complete all as specified and directed.

Fixing only asbestos cement corrugated or semi corrugated sheets in roof walls fixed with 'L' type or 'J' type or cranked hook bolts, washer etc complete all as specified and directed.

M&L for asbestos cement two piece adjustable ridge 6mm thick fixed with 'L' or 'J' bolts with washer etc complete all as specified and directed.

All as per Item No 13 here in above but except AC ridges complete all as specified and directed.

M&L for filleting in any position and to any shape in CM 1:3 sectional area exc 25 sqcm but not exc 50 sqcm complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates complete all as specified and directed.

Preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) with two coats creosote complete all as specified and directed.

S&F steel windows double shutters, one glazed and other fly proof shutter side hung including projecting type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete including 12mm square guard bars as specified in relevent IS complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified and directed.

S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified and as directed.

S&F Aluminium single leaf door on pivots including hydraulic door closer (Aluminium Extruded Section), door lock, handles 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder coated sections as given in 'JINDAL' Catalogue complete all as directed by Engineer-in-Charge. (a) Rectangular tube - 14005 (b) Shutter vertical - 18501 (c) Shutter top rail - 19503 (d) Shutter middle rail - 20060 (e) Shutter bottom rail - 19511 (f) Glazing clips - 19352.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F Aluminium doule leaf door on pivots including hydraulic door closer (Aluminium Extruded Section), door lock, handles 5mm thick plain glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and using powder coated sections as given in 'JINDAL' Catalogue complete all as directed by Engineer-in-Charge. (a) Rectangular tube - 14005 (b) Shutter vertical - 18501 (c) Shutter top rail - 19503 (d) Shutter middle rail - 20060 (e) Shutter bottom rail - 19511 (f) Glazing clips - 19352.

S&F aluminium powder coated sliding door shutter using following sections as given in 'JINDAL' catalogue and fixed on top hung incl roller etc complete all as directed by Engineer-in-Charge. (a) Rectanguler tube - 14005 (b) Vertical Rail - 19502 (c) Top rail - 19503 (d) Middle rail - 20060 (e) Bottom rail - 19501 (f) Glazing clips - 19352.

S&F in repairs double action floor spring hydraulically regulated made of minimum 1.25mm thick alloy sheet foundation box, with stailess steel cover, governing pivot made of brass, other parts made of mild steel heavy duty of approved make as per sample approved and directed.

S&F in repairs aluminium partition with 12mm thick prelaminated particle board of choice colour in bottom panel and 5mm thick plain glass in top panel fixed with clips aluminium beads, rubber gaskets etc, centre to centre distance of vertical member shall n. exc 1mtr and horizontal member shall n. exc 1.10mtr using following aluminium powder coated section as specified in JINDAL Catalogue complete as directred. (a) SP - 20048 (b) DP - 20047 (c) Glazing clips - 19352.

S & F ventilators/louvers using 4mm thick x 10cm wide froasted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed :- (a) SP : 20048 (b) Glazing clips : 19352

Taking down existing aluminium shutters cleaning, repairing easing, making good by changing stiles, lock rails,top & bottom rail with cleats, rubber, beading, floor spring etc and refixing in the same position after repairing and making good distrubed area complete all as specified and directed (Note :- Replaced aluminium section will be measured seperately as supply only).

Supply only powder coated aluminium section of stiles top, bottom, locking rails for doors, windows, ventilators, partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F in repairs Mortice lock, vertical type size 100mm of brass body, 4 lever complete all as specified and as directed.

S&F in repairs 5mm thick plane or frosted glass in panels of aluminium doors and partitions etc complete all as specified and as directed.

S&F in repairs 4mm thick plane or frosted glass in panels of aluminium doors, windows and partitions etc complete all as specified and as directed.

S&F in repairs MS pivots top of approved make complete all as specified and directed.

S&F in repair hydraulic door closer aluminium body suitable for door shutter of 850 to 1000mm in width and of weight between 61 to 80 Kg of approved make of ISI marked complete all as specified and as directed.

S&F in repairs "L" clamps with necessary nut & bolts for door frame complete all as specified and directed.

S&F in repairs MS pivots bottom of approved make complete all as specified and directed.

S&F in repairs slider assembly for sliding aluminium doors with "G" section and including necessary nut and bolts fittings clamps wheel tracks etc complete all as directed.

S&F aluminium powder coated fancy type curtain rod 20mm bore all as specified and directed.

S & F aluminium powder coated brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty of fixed with beads as specified and directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or wooden beads in square n exc 0.50 sqm in each pane complete all as specified and directed.

S&F figured glass pin head type, 3mm thick and glazing with oil putty in square n. exc 0.50Sqcm in each pane complete all as specified and directed.

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m complete all as specified and as directed.

M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channels, chajja coving and base slab for tank complete all as specified and directed.

Rendering 10mm thick in CM (1:4) on brick / concrete surfaces using water proofing compound as per manufacturers instruction finished with sponge finish complete all as specified and directed (NOTE : WPC shall be measured and paid seperately)

Removing of existing water tank of capacity 1000 or 2000 Ltr setting aside (or lowering if required) for repair, cleaning etc and reconnecting & refixing in position after carrying out necessary roof treatment including necessary fittings and GI Pipes if required. (NOTE : Necessary by pass arrangements for water supply is to be done by the contractor till completion of roof work.)

Disconnecting existing tank of following capacity setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting & refixing in position (cleaning, repairing etc measured separately) complete all as specified and directed. (Note :- The rates shall deemed to be inclusive of necessary temporary arrangements for un interrupted water supply to users)

Exceeding 500 ltr and Not exceeding 1000 ltr

Exceeding 1000 ltr and Not exceeding 2000 ltr

S&F of rotational moulded polythene water storage tanks of double layers (cylindrical vertical with closed top) hoisted and fixed in position including locking arrangement device complete all as specified and directed for the following capacity :-

500 litres

1000 litres

M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and as directed.

M&L water proofing treatment to RCC roof slabs, walls, chajjas etc shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10mm thick plaster screed bed layer in CM 1:3 on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc by brooming with broom sweeping free from dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane non woven, polyster weighing not less than 3.5 Kg/Sqm with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed

Taking down chowkats or frames of wooden or steel not exc 1.5 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down chowkats or frames of wooden or steel exc 1.5 sqm and not exc 4 sqm (without taking off shutters from frames) complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed

Taking down shutters of any description exc 2 sqm and not exc 4 sqm each complete all as specified and directed

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 125x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F pressed steel frames for doors with one or more rebates incl necessary hold fasts, hinges, lock strike plate etc complete as specified size of frame 105x60mm filled with PCC 1:3:6 type C-0 complete all as specified and as directed.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F rolled mild steel section conforming to grade E-165(Fe-290) framed work as in door or gates of angle or other section with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either and hinges or steel hanging door fittings and hanging, fastening etc complete all as directed.

S&F 30mm thick flush shutters, solid core construction with block board core construction with block board core and plywood face panells commercial type on both faces incl 6mm thick 1st class HW (Teak wood) beading all around on edges complete all as specified and directed.

M&L Preparatioin of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions and as directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed.

S&F butt hinges 100mm size stainless steel medium weight complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts or extruded etc length of bolt 300mm complete all as specified and directed.

S&F aluminium handles, anodised, cast type, of size 150mm complete all as specified and directed.

S & F MS 300mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F floor door stopper, aluminium alloy body and tongue anodised with hard drawn steel spring of 140mm size overall complete all as specified and directed

S&F in repairs 18mm thick MDF board exterior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cabinets/cupboard shutters etc fixed with screw including 3mm thick, ist class HW(TW) beading all around on edging to timber frame work all as specified and directed.

S&F continuous (Piano) hinges mild steel bright finished or electro galvanised width of flap 30mm complete all as specified and directed.

S&F 125mm dia cupboard handles fixed with nuts screws and washer of brass polished complete all as specified and directed.

S&F Hasp and staples safety type aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

S&F Hasp and staples 100mm size mild steel wire type stove enamelled black including bolt to hinges plate complete all as specified and directed.

Demolition of brick/PCC block/stone masonary built in cement mortar complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone agg as in coping on top of wall, bed blocks and the like inculding weathering , slightly rounded or chamfered angles and throating as directed by Engr-in-Charge including use of necessary form work complete all as specified and directed.

Taking down cement plaster on brick/ block walling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for ready mix plaster 15mm thick in CM (1:4) on fair faces of brick/PCC block walling using water proofing compound as per manufacturers instructions surface finished with sponge finish complete all as specified and as directed. (Note : WPC shall be measured and paid separately)

M&L for ready mix plaster 10mm thick in CM (1:6) on brick/concrete surfaces finished even & smooth with a thin layer of sagol finish complete all as specified and directed

Supply only integral water proofing compound complete all as specified and directed.

Preparation of new plastered surfaces and applying two coats of cement base paint complete all as specified and as directed.

Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290.Gde-E-165 for MS framed work as in trusses, purlins, rafters, post etc conforming to grade E-250 (Fe 410W, quality 'A') including shaped washers, including necessary cutting required length, notching, drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plate, gusset plate and also erecting in true position complete all as specified and directed.

S&F in repairs collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runnners brass handles etc as specified in SSR Part-I , erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

S&F in repairs steel rolling shutters made out of 1.25mm thick laths/sheets without ball bearing as specified including top cover, anchoring rod, hasp & staples & one shop coat of primer and erected in position as indicated, manual type complete all as specified

Taking down & refixing steel rolling shutters with out ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type all as specified and directed

S&F in repairs safety lever locks mild steel with 4 levers for rolling shutters all as specified and directed

S&F in repairs ball bearing for rolling shutters complete all as specified and directed

Taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified and directed of following sizes :-

15mm bore

20mm bore

25mm bore

Refixing of old unserviceable steel tubing and connections in new or old unserviceable position (wall/floor/ceiling etc) complete all as specified & directed of sizes :-

15mm bore

20mm bore

25mm bore

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc complete all as specified and directed of the following sizes :-

15mm bore

20mm bore

25mm bore

S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :-

15mm bore

20mm bore

25mm bore

S&F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified & directed with following bore of pipe :-

15mm bore

20mm bore

25mm bore

Dismantling of drain pipes AC /CI/PVC pipes of various dia jointed in CM or adhesive 75 to 110mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 110mm dia complete all as specified and as directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall/ceiling or laid in trenches of size 75mm dia complete all as specified and as directed.

S&F in repairs bib cock 15mm bore standard of PTMT screwed down high pressure handle screwed for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm bore bib taps, elbow operated brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and as directed.

S & F in repairs vitreous china wash hand basin, white flat back of size 550x400mm including 15mm dia CP pillar tap, PVC waste coupling 32mm, chain and plug and PVC waste pipe, PVC connection 45cm long including CI brackets/fixing with fasteners etc complete all as specified and directed.

S & F in repairs, vitreous china wash down water closet pan "Pedestal" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc complete all as specified and direcrted.

S&F in repairs PVC low level flushing cistern 10 litres capacity make ISI or equivalent including all internal fitting in repairs, pair of brackets, including inlet/ outlet PVC pipe connections etc complete all as specified and directed.

S & F in repairs stop valves 15mm bore of PTMT screwed down of any colour high pressure screwed both ends for iron pipe or for unions complete all as specified and as directed.

M&L for Cutting holes in brick walls built in cement mortar for bolts, joist, pipes, air flues, ventilators and cast iron boxes superficial area exc 150 sqcm but n exc 400 sqcm and making good in CM (1:3) or PCC (1:2:4) type B-1 as required

S&F in repairs Wall mixer 3-in-1 including telephone shower for 15mm bore of pipe conforming to CAT No CON-CHR-281KN of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs Bib taps CP 15mm bore fancy type conforming to CAT No ARI-CHR-39037 of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No ACN-CHR-1111N of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs CP toilet paper holder confirming to CAT No ACN-CHR-1151N of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs CP Soap dish confirming to CAT No ACN-CHR-1131N of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs Corner glass shelves with brackets CAT No ACN-CHR-1173 of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs CP shower rose 125mm dia with arms for 15mm bore of pipe conforming to CAT No OHS-489 of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs Two way Bib taps CP 15mm borefancy type conforming to CAT No. ARI-CHR-39041 of "Jaquar" or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs CP towel ring square conforming to CAT No. ARI-CHR-1121 N of "Jaquar" or of or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs CP 15mm bore concealed stop cock with long neck conforming to CAT No. ARI-CHR-39089 of "Jaquar" or of or Equivalent make of MARC complete all as specified and as directed.

S&F in repairs CP health faucet (ABS body) with 1 mtr long PVC type & wall hook conforming to CAT No. ALD-CHR-565GA of "Jaquar" or of or Equivalent make of MARC complete all as specified and as directed.

Dismantling stone slabs/tiles of any description or thickness laid bedded & pointed in cement mortar in floors, hard standing, Apron etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, 25mm average thickness leveling course as in padding concrete complete all as specified and directed.

M&L hand cut Kota stone flooring 20 to 25 mm thick laid, jointed with grey cement slurry and pointed with coloured cement to match the shade of Kota stone as in floor, treads etc including rubbing and mirror polishing laid over and including screed bed 20mm thick in CM 1:4 complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base/flooring complete all as specified and as directed.

M & L for 300x300mmx6 to 7mm thick, non skid ceramic coloured tiles in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete over and including 20mm thick screed bed in CM (1:4) etc complete all as specified and directed.

M & L for 300x200mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed.

M & L for 300x600mmx5.5 to 6mm thick coloured glazed ceramic tiles in dado/skirting , laid and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10 mm thick CM (1:3) backing coat including triangular filleting on top in CM 1:4 complete all as specified and directed.

M&L for coloured vitrified tiles 600x600x8mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for coloured vitrified tiles 800x800x8-10mm thick as in flooring, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 20mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for matt finished coloured ceramic tiles 7 to 8mm thick joint free, 400x400mm size of approved colour, set jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in CM 1:4 etc complete as in flooring all as specified and directed.

S & F for Granite 18 to 20mm thick, machine cut (of any type) work (table rubbed and polished) in steps, kambs, pillars, window cills, cooking platforms and like in 10mm thick screed bed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L for Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for precast chequered cement concrete titles, glossy finish of size 305x305x25mm thick, conforming to IS-1237 (2006) set jointed and pointed in neat cement slurry in floor laid over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for precast inerlocking paver blocks glossy finish with any shape and size conforming to 15658-2006, 60mm thick M-35 grade with grey cement and pigment laid over & including 75mm thick stone dust/grit complete all as specified and as directed

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75mm thick laid in alternate bays including finishing the surfaces even and sooth using extra cement complete all as specified and directed.

Easing of wooden doors and windows by means of plaining, adjusting refixing of panels/single leaf/double leaf including necessary screws nails etc complete all as specified and directed. (Note :- One set of window of single/double/triple leaf and one door shutter of sinlge/double leaf shall be measured as one job)

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern roofing tiles complete all as specified and directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified and as directed.

M&L for IInd class HW clean sawn battens exceeding 5 sqcm and not exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed.

Fixing only IInd class HW clean sawn battens at 30cm centres exc 5 and n exc 15 sqcm (Except batten) complete all as specified and directed.

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

S&F in repairs IInd class hard wood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section complete all as specified

M&L for plain fillets of IInd class hard wood exc 13 but not exc 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.

Gauri Associates

Anand Trading Co

Raj Construction Company

S G Engineers

L.K.R.TIWARI CONSTRUCTION

Parhar Enterprise

TRINITY ENGINEERS