SPECIAL REPAIRS TO BLDG NO P 08 UNDER AGE I DARJEELING

Amount

Dismantling Plain or Corrugated steel and FRP Sheeting of any gauge and thickness as in Roofing including Ridge, Nainital or Similar Pattern Roof Coverings, complete all as specified and as directed.

Dismantling boarding of any description, fixed in any position with nails, complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre, Pulp, Insulation etc.) or Insulation Board/Slab/Blankets of any thickness, etc. including Cover Fillets of any description, complete all as specified and as directed.

Dismantling Timber Scantlings 40 Sq Cm and Over in Section as in Unframed work, in any position, complete all as specified and as directed

Dismantling Timber Fillet, Rails, Posts, Rafter, Purlin Etc., under 40 Sq Cm in Section as in Unframed work, complete all as specified and as directed

Demolition of Brick Work/ Stone masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed.

Demolition of Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

Demolition of Cement Concrete (un-reinforced) of any description in any position not otherwise specifically provided for, complete all as specified and as directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove Dust, debries/ rubbish etc., complete all as specified and as directed.

Taking down old steel tubing 15mm bore (dia) and connections, including cleaning and removing from site of work complete all as specified and as directed.

Taking down old steel tubing 20mm bore (dia) and connections, including cleaning and removing from site of work complete all as specified and as directed.

Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

M&L Brick Work with Fly Ash Bricks, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws as specified, complete all as specified and as directed.

All as per Item No.-15 here in above, but Plain sheeting, complete all as specified and as directed.

M&L for 40mm thick second class hardwood Boarding, Planed one side, with butt joints and fixed with nails, as in floors, complete all as specified and as directed.

M&L for 20mm thick 2nd class hardwood boarding work fixed with nails planed one side with butt joint as in Shelves, Cupboards, racks, Palmet Box, Skirting etc., complete all as specified and as directed.

M&L for 15mm thick 2nd class softwood boarding work planed one side and edges tounged and grooved or ribeted with butt joints as in wall panelling and similar work fixed with nails, complete all as specified and as directed.

M&L Second Class Hardwood Plain Fillets, square, rectangular or triangular in Section Clean swan, fixed with Nails, sectional area exc. 13.0 Sq Cm but not exc. 25.0 Sq Cm, complete all as specified and as directed

M&L for providing 600x600mm aluminium snap grid framed work for false ceiling, comprising of 600x600x5mm thick plain embossed PVC sheet of density 600kg/cum, used as panel insert in a frame work using powder coated aluminium T-section of sizes 25x25mm, 19gauge or 1mm thick. The aluminium frame work is supported from the ceiling by means of 'J' hook and GI Suspended hanger of 4mm dia of required length to maintain proper level. The aluminium framework is supported on side walls by means of Powder coated aluminium 'L' section of size 25x25mm, 19gauge or 1mm thick, complete all as specified and as directed.

M&L second class hard Wood as in scantlings, timber fixed work clean swan complete all as specified and as directed.

S&F in-repair Curtain rails,mild steel,chromium plated with fixing brackets,stops,rollers etc complete all specified and as directed..

M&L Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Fair face of Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L Rendering (Externally) 15mm thick in Cement Mortar 1:4 in two layers on Brick Walls/Concrete Surfaces, 5mm thick top layer mixed with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid as ‘Supply only’ under relevant Item.

Supply only Integral Water Proofing Compound(WPC), conforming to IS-2465:1975 and as approved, complete all as specified and directed.

M&L Formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation, drains and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Surface Channels and Drains, Manholes etc. including use and waste Formwork as ordered, complete all as specified and as directed.

M&L Extra forming Fair Finished to Drains or Channels 30Cm inner girth in Cement Concrete surfaces using Extra Cement including Forms Moulds Mitred/ Stopped Ends, etc., complete all as specified and as directed.

Add to or Deduct from Item No. 29 here-in-before for Every 25mm Girth or Part thereof Over or Under 30 Cm, complete all as specified and as directed. NOTE: Final quantity of this item will be changed as per site requirement.

M&L for Screed Bed or Bedding Layer 20mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.

M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.

M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

M&L for Granite (of any type) tiles 20mm thick machine cut, as in flooring, coocking platform, etc., bedded andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.

Labour only for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed.

M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate), 75mm thick as in Plinth protection, Floor, Path, etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.

M&L preparing Old Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.

M&L preparing old untreated/rusted Steel and Iron surfaces (CGI & PGI Sheets on Walls and Roofings) by scrapping and applying Two Coats of Anti-corrosive Coptic Red/Green Synthetic Enamel Paint (as approved), complete all as specified and as directed.

M&L preparing new Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a coat of pink primer, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Oil Bound Distemper over a coat of Chalk Whitening, complete all as specified and as directed.

M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Exterior Weather coat paint over a coat of Cement primer, complete all as specified and as directed.

M&L for preparation of wood and wood based materials, new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

M&L for applying five coat of melamine polishing to existing wooden surfaces including preparation of surfaces and complete removal of existing treatment as per manufacture's instructions and as directed.

M&L Complete removal of existing Surface Treatment by washing rubbing down and stopping of old decorated/treated surfaces of Walls and applying Two Coats of oil bound distemper, complete all as specified and as directed.

M&L Complete removal of existing Surface Treatment by washing rubbing down and stopping of old decorated/treated surfaces of Walls and applying Two Coats of Exterior Weather coat paint over a coat of Cement primer, complete all as specified and as directed.

M&L Reinforced Cement Concrete (Nominal Mix) 1:1½:3 (20mm graded stone aggregate) as in Slab supported on walls, cantilevers, Kitchen Shelves, etc., complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Formwork to Sides and Soffits of Floor or Roof Beams, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., rough finished surfaces of Concrete, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L TMT Bars 6mm to 8mm dia in Nibs, Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

M&L Mild Steel Flat Iron 25x3 mm as in wind tie, straps, suppots or stays for rainwater pipes etc., cut to length or drilled hole and fixed with screw, etc. grade of Steel conforming to Fe-290 Gde E-165, complete all as specified and as directed.

Supply and fix in-repair Bib Tap 15mm bore (dia), Cast Copper Alloy with Crutch or Butter-fly Handle, Fancy type, chromium plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

Supply and fix in-repair Single lever Basin Mixer w/o popup mixer, 15mm bore (dia), Cast Copper Alloy with Crutch or Butter-fly Handle, Fancy type, chromium plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

Supply and fix in-repair Stop Valve 15mm bore (dia), Cast Copper Alloy, Chromium Plated, (Consealed Type), screwed down, high pressure, with Crutch or Butter-fly Handle, screwed both Ends for Iron Pipe or for Unions and fixed, complete all as specified and as directed.

Supply and fix in-repair Pillar Tap 15mm bore (dia), Cast Copper Alloy, Fancy type, Chromium Plated with Capstan Heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe and fixed, complete all as specified and as directed.

Supply and fix in-repair of Brass Chromium Plated Tubular Towel Rail, 20mm dia, 'D' Type, 60 cm long between flanges with bracket and fixed to Walls with Chromium plated Brass Screws, complete all as specified and as directed.

S&F in repair cast iron floor trap 100mm dia with grating incl jointing to waste pipe in cement concrete 1:2:4 type B-1 complete all as specified and as directed.

S&F in repair, Vitreous China Wash Hand Basin 550x 400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair Vitreous China White Squatting Pan (Orissa Pattern) of size 580x440 mm with integral foot rests, 'P' or 'S' Trap and (excluding Flushing Cistern and Flush Pipe) including connection to drain (or outgoing pipe) and to Flushing Pipe, Anti-syphonage Pipe, etc. and Making Good to Floor /distrubed surfaces and fixed-in-repair, complete all as specified and as directed.

Supply and fix in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic Action type with Inlet, Ball Valve, Float and Handle, a pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, making good disturbed surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in repair, Stainless Steel Sink with Drainage Board l.0mm thick Over-all size 915x460mm and Bowl size 410x330x160mm for Kitchen or Laboratory with Plugs, Washers, Waste Fitting 32mm bore (dia) of Brass Chromium Plated, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.

S&F in-repair of Flexible Waste Pipe 32 mm bore dia (bore) 1150 Cm long for Wash Hand Basin, Sink, etc., complete all as specified and as directed.

S&F in-repair of PVC Connection Pipe 15mm size with PTMT Nuts of length 450mm, complete all as specified and as directed.

Supply & laying Steel Water Tubing 15mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

Supply & laying Steel Water Tubing 20mm bore (dia), Galvanised, ‘medium grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other situation, complete as all specified and as directed.

M&L for Cutting chases in brick wall not exc 10 cm girth for concealed water tubing or concealed conduit wiring, etc. and making good to facings where required and pointing in cement mortar 1:3 to walls, complete all as specified aand as directed.

S&F PVC (SWR) half round gutters drain pipe 180mm bore , fixed to eave board with necessary fixing arrangement , complete all as specified and as directed.

S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe complete all as specified and as directed.

S&F 180mm PVC (SWR) pipe clamp as in gutter drain pipe complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length fixed to wall 110mm bore with rubber ring joint complete all as specified as directed.

S&F PVC (SWR) bends 110mm bore (any radious), jointing with solvat cement, complete all as specified.

RAI CONSTRUCTION

Damdoo Bhutia

HIRA SINGH