Repair and Renovation of Govt. Boys Middle School at Ramkote for running classes of Govt. Degree College Ramkot

Amount

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material, including all leads & lift.

Demolishing mud phaska in terracing and disposal of material, including all leads & lift.

Dismantling roofing including ridges, hips valleys and gutters etc.. G.S.Sheet.(including all leads and lifts carriages of material by MT/HL)

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height (including all leads and lifts carriages of material by MT/HL)

Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out the excavated earth and disposal of surplus excavated earth as directed including all leads & lift. a) All Kind of soil.

Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material as per direction of Engineer-in-charge. a) In cement mortar.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead: a) of area be yond 3 sqm.

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete. a) With residual type petroleum bitumen of grade VG-10.

10mm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar mixed with bhusa at 35 kg per cum of earth and gobri leaping with bhusa at 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay:1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 (1 cement:3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. a) With common burnt clay (non modular) brick tiles of class designation 10.0 (including all leads and lifts carriages of material by MT/HL)

Providing gola 75x75mm in cement concrete 1:2:4 (1 cement:2 coarse sand:4 stone aggregate 10mm and down gauge), including finishing with cement mortar 1:3 (1 cement:3 fine sand) as per standard design. In 75x75mm deep chase (including all leads and lifts carriages of material by MT/HL)

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20mm nominal size) over PVC sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete (including all leads and lifts carriages of material by MT/HL)

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes in the masonry surrounded with 12mm thick cement mortar of the same mix, as that of masonry (lead caulking with be paid for separately). a) 150mm diameter.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. a) Welded.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal / vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. a) 0.63mm thick with zinc coating not less than 275 gram/sqm.

Providing and laying cement concrete of specified grade indluding curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) with 20% boulders (including all leads and lifts carriages of material by MT/HL)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/HL)

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15˚, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately). a) Second class deodar wood.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). a) Sal wood.

Providing and fixing 30mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both directions with wire of dia. 0.63mm for doors, windows, and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw as per direction of Engineer-in-charge. a) Second class deodar wood.

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. a) With 2nd class teak wood beading 62x19 mm.

Providing 40x5mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix. (1 cement: 3 coarse sand :6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. a) Fixed to openings/wooden frames with rawl plugs screws etc.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screw etc. complete.a) 250x16mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screw etc. complete

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Dumping stones in horizontal i.e. on level including cost of stones (including all leads and lifts carriages of material by MT/HL)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidations each deposited layer by ramming and watering, lead upto 50m & lift upto 1.50m. (including all leads and lifts carriages of material by MT/HL)

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

20mm cement plaster of mix. 1:4 (1 cement : 4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

12mm cement plaster of mix. 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/HL)

15mm cement plaster on the rough side of single or half brick wall of mix. 1:4 (1 cement: 4 fine sand) (including all leads and lifts carriages of material by MT/HL)

6mm cement plaster to ceiling of mix. 1:3 (1 cement:3 fine sand) (including all leads and lifts carriages of material by MT/HL)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. a) 2mm thick.

Providing and laying vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. a) Size of tile 600x600mm (including all leads and lifts carriages of material by MT/HL)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete (including all leads and lifts carriages of material by MT/HL)

Centring and shuttering including strutting, propping etc.and removal of form work for :

a) Foundation, footings, bases of columns etc. for mass concrete

b) Suspended floors, roofs, landings, balconies and access platforms

c) Edges of slabs and breaks in floors and walls under 20cm wide.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg / 10 sqm).

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new steel work

Supply and fixing of following size of medium class PVC conduit pipes along with accessories in surface recess including cutting the wall complete.

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc

a) 15mm dia nominal bore

b) 20mm dia nominal bore

Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware / Hindware / Seabird/Orient (Coral)/ Hindustan/Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever require. a) White Vitreous china Orissa Pattern W.C.pan of size 580 x 440mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever)conforming to IS:7231, with all fitting and fixtures, complete including cutting and making good the walls and floors wherever required: W.C.pan of Hind ware / Cera make with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. a) White vitreous china wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps.

Providing and fixing 15mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931.

Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS:891.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waster fittings complete. a) Semi rigid pipe. 32mm dia.

Providing and fixing looking mirror of superior glass(of approved quality )and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm

Providing and fixing PTMT liquid soap dish container 109mm wide, 125mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.a) 450mm long towel rail with total length of 495 mm, 78mm wide and effective height of 88mm, weighing not less than 1700 gms.

Providing and fixing accessories for sanitary fittings

a) Door bend 110mm dia

b) Door Tea

c) Gas Coal.

d) Plane Tea 110mm

e) Reducer 75x110mm

Providing & fixing of 1 Horse Power Motor.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Tarnah for an average lead of 19.00 Km. by M.T. b) Stone aggregate 40mm nominal size & above from Chadwal for an average lead of 32.00 Km. by M.T. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Chadwal for an average lead of 32.00 Km. by M.T. d) Bricks from Hiranagar for an av. lead of 33.00 km. by M.T. e) Brick tile from Hiranagar for an av. lead of 33.00 km. by M.T. f) Stones from Ujh for an av. lead of 19.00 km. by M.T..L.

Virender Kumar

Raman Kuma

Hargovind

TIKKA SHARMA

Rajesh Kumar

KARAN SINGH