REPAIR/MAINTENANCE OF STREET/BUILDING SECURITY LIGHT AND OTHER CONNECTED WORKS AT METCALFE HOUSE, ZONE A N B UNDER GE (I) RND DELHI

Amount

Supply and erection Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 09 Mtr metres long. Poles shall be painted with two coats of black bituminous paint throughout internally, and externally up to the planting depth. The remaining portion of the exterior shall be painted with one coat of red oxide primer including taking down old unserviceable pole complete all as specified and directed . Note - Necessary excavation, earthwork & PCC foundation will be measured & paid separately.

Shifting of poles 09 mtr long including all accessories (junction box, street light, service connection cable, clamp ) without any damage from one place to another place not exceeding 200 mtr and errection at new place. Poles shall be painted with two coats of black bituminous paint throughout internally, and externally up to the planting depth complete all as specified and directed. Note - Necessary excavation, earthwork & PCC foundation will be measured & paid separately.

M&L for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth wire 4.00 mm dia by means of Copper nuts, bolts and washers. GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI wire of 4 mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.

M&L for earth continuity conductor passing through & including PVC Conduit of size 25 mm main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or any other indicated situation for loop earthing etc as required 4.00 mm dia galvanised iron wire complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5m depth & not exceeding 1.5m in width over energised LT cables for carrying out brick work for protection of cable duct including for taking out and relaying of LT Cables complete all as specified and directed.

All as per item No. 06 but in hard / dense soil.

Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick as in soft/loose soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply & laying dry fine sand for cushioning of underground cable laid in trenches/duct complete all as specified and directed. Note - Punned thickness shall be measured.

M&L for sub class 'B' burnt brick flat across the cable, for protection of cable laid in trenches complete all as specified and directed

Supply and laying in replacement of old unserviceable GI pipe medium grade of 50mm dia including GI fittings laid in trenches for protection of UG cable complete all as specified and directed

All as per item No.11 above but 40 mm dia.

Supply and laying in trenches, fixed to wall / pole/ tray etc UG cable XLPE insulated armoured heavy duty electric UG cable with aluminium conductor 1100 volts grade of cross sectional area of following size complete all as specified and directed.

16 Sqmm 4 Core

25 Sqmm 3.5 Core

35 Sqmm 3.5 Core

10 Sqmm 2 Core

Supply and fix in replacement old unserviceable burnt MCCB 400 Amps four pole 415 volts 50 Hz ,breaking capacity 36 KA fixed type complete all as specified and directed.

All as per item Ser No 14 above but of capacity 250Amps.

All as per item Ser No 14 above but of capacity 200Amps.

All as per item Ser No 14 above but of capacity 350Amps, 25 KA

All as per item Ser No 14 above but of capacity 160Amps, 25 KA

M&L for GI bracket made of 40 mm medium grade GI pipe bend to shape approx 1.2 mtr length incl mild steel flat iron Clamps with nut bolts etc complete for fixing of street light including taking out old unserviceable GI brackets complete all as specified and directed.

S&F Junction box SMC KIOSK box water proof IP-54 of size 225x29x122 mm including fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole making hole on pole as per site complete all as specified and directed.

M&L for Copper conductor cable 2.5 Sqmm 3 core PVC sheathed multi core for connection of street light fittings inserting from top in side the pole and connecting in junction box complete including making Hole in Pole as per Site, complete all as specified and directed

M & L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for coping of pole and filling in road cuts/ hard standing complete all as specified and directed

M & L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate for base of foundation of pole complete all as specified and directed.

M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for foundation of pole around pole complete all as specified and directed.

S&F LED Post Top Lantern 25 watt luminaire with diffuser and painted spun aluminium deflector including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and including taking down old unserviceable complete all as specified and directed.

S&F in Replacement LED Post Top Bolard light 10 W, UFO shape IP-65 including nesessory excavation and PCC work for fixing including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and taking down old unserviceable Complete all as specified and directed.

S&F in replacement New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 90 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and taking down old unserviceable. complete all as specified and directed.

S&F in replacement New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source with toughened glass top cover. TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. of capacity 120 Watt including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate including taking down old unserviceable complete all as specified and directed.

S&F in replacement Energy saving, environment friendly, long life, exclusive innovative die-cast aluminium flood light with highly efficient IP- 66 LEDs as light source, suitable for highlighting architectural features or retail spaces of capacity 180 Watt complete with connection including 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate and taking down old unserviceable complete all as specified and directed.

S&F in replacement Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light,suitable for highlighting architectural facade and general purpose lighting of capacity LED 120Watt completed with connection including taking down old unserviceable complete all as specified and directed.

S&F in replacement of old unserviceable driver for 90W LED street light fitting complete all as speciified and directed.

S&F in replacement of old unserviceable driver for 120W LED street light fitting complete all as specified and directed.

S&F in replacement service cable 1100 volts grade heavy duty PVC insulated copper multistranded conductor served with inner sheathing of size 1.5 Sqmm 3 Core complete including taking down of old burnt cable complete all as specified and directed.

M&L pole painting 9.0 mtr long with a coat of aluminium paint after preparation of old painting surface by scrappining including marking of black and yellow strip not less than 30 cm width with sythethic enamelled paint from coping upto height 1.5 mtr of pole alternative way including necessary `MES & Pole number to be written in the circular yello batch on the pole complete all as specified and directed.

Supply and fixed in replacement IP 67 rated flexible LED strip light 36 watt including driver 5.0 mtr length to add great color & dramatic effects with extensive pallet of colors including DMX controller with accessories 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate including taking down old unserviceable fitting complete all as specifed and directed.

Supply and fixed in replacement Environmental friendly, new generation, energy saving, decorative spike light using COB LED 09 watt as light source 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate including taking down old unservicable light fittings complete all as specifed and directed.

Supply and fixed in replacement High light intensity empowered colour changing & monochromatic LED under water fountain light with polarized light design & intelligent logarithmic control technology of capacity watt 3 core 1.5 sqmm multistranded flexible copper conductor cable from connection junction box to light fittings deemed to be included in the quoted rate including taking down old unservicable light fittings complete all as specifed and directed.

M&L in replacement Decorative Pole Crown GI with PI Painted 3.5 Mtr Long with single side bracket Base Shape 300X300X12mm including necessary excavation and PCC work as per OEM and including taking down old unserviceable pole complete all as specified and directed.

S&F Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22, 8.5 metres long poles shall be coated with two coats of black bituminus paint through out internally and externally upto plinth depth. The remaning portion of the exterior shall be painted with one coat of red oxide primer complete all as specified and directed. Note PCC earth work shall be measured and paid separately.

S&F in replacement Timer switch Astronomical type ,415 Volt three Phase of 63 Amps rating with Three Pole ML-4 contactor incl one Toggle switch for Auto, off and Manual function and incomming MCB TP internally pre wired and Fitted inside steel enclosure complete all as specified and directed

S&F LED Post Top Lantern 40 watt luminaire with diffuser and painted spun aluminium deflector including taking down old unserviceable complete all as specifed and directed.

S&F in replacement Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 45 Watt including taking down old unserviceable complete all as specifed and directed.

S&F Powder coated pressure die cast aluminium SMD LED street light wirh heat resistant toughened glass of capacity 70 Watt including taking down old unserviceable complete all as specified and directed

S&F LED flood light with pressure die cast aluminium housing 80 Watt with connection including taking down old unserviceable complete all as specified and directed

Supply and laying of 50 mm dia GI tubes, 'light grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.

Supply and laying of 80 mm dia GI tubes, 'light grade', galvanised, with all fitting; laid in trenches complete all as specified and directed.

S&F in replacement of Junction box SMC KIOSK box water proof of size 340x280x130 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specifed and directed.

M&L for boring of holes under road , pavement , hard standing by trenches techonology using ultra sound technology/ mannualy mechanically and necessary machine for 100 mm dia GI pipe complete all as specifed and directed.

S&F in replacement of Junction box SMC KIOSK box water proof of size 140x140x95 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specifed and directed.

S&F in replacement of Junction box SMC KIOSK box water proof of size 300x200x125 mm incl fixing of terminal connector 100A 4 pole suitable for in and out connection of 4 core cable fixed on pole complete all as specifed and directed.

S&F in replacement of LED flood light with pressure die cast aluminium housing 100 Watt Orion 3.0 Seris completed with connection including taking down old unserviceable complete all as specifed and directed.

S&F in replacement of LED flood light with pressure die cast aluminium housing 150 Watt Orion 3.0 Seris completed with connection including taking down old unserviceable complete all as specifed and directed.

S&F in replacement of LED flood light with pressure die cast aluminium housing 200 Watt Orion 3.0 Seris completed with connection including taking down old unserviceable complete all as specifed and directed.

S&F in replacement of driver for 45 W LED street light fitting complete all as specifed and directed.

S&F in replacement of driver for 75 W LED street light fitting complete all as specifed and directed.

S&F in replacement of driver for 100W LED street light fitting complete all as specifed and directed.

S&F in replacement of driver for 150W LED street light fitting complete all as specifed and directed.

S&F in replacement service cable 1100 volts grade heavy duty PVC insulated aluminium multistranded conductor served with inner sheathing of size 10 Sqmm 2 Core complete including taking down of old burnt cable complete all as specifed and directed.

dee een enterprises

M/s Wazer Enterprises

Pradeep Bros

PARADISE INFRA POWER COMPANY

Leo Air and Power Solution pvt Ltd.

Flint India

M/S GUPTA ENTERPRISES

A.R.P. ENGINEERING SERVICES