PROVISION OF WORK SERVICES FOR RENOVATION OF TOILET AT MANSA BLOCK ADDITION ALTERATION TO SECURITY WALL AT DHOBI GHAT AND SPECIAL REPAIR TO IN DOMESTIC AREA AT 4 AFSB VARANASI UNDER GE AF GORAKHPUR

Amount

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr depth and getting out complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing surplus excavated material not exc 50 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and pre-cast articles complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded aggregate as in mass concrete complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

All as per item No. 6 above but except bricks using old bricks as obtained.

M&L for RCC (Design mix) M-25 using 20mm graded stone aggregate as in foundations footings, rafts, beam, plinth beam etc complete all as specified and directed.

M&L for RCC (Design mix) M-25 using 20mm graded stone aggregate in columns, pillars, piers , posts and struts complete all as specified and directed.

M&L for RCC (Design mix) M-25 using 20mm graded stone aggregate in mid beam/ coping complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item No. 11 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for rough finished surfaces of concrete complete all as specified.

M&L for form work to sides and soffit of coping (projected) for rough finished surfaces of concrete complete all as specified.

M&L for form work to side sides of pillars, posts, struts, piers, columns for rough finished surfaces of concrete complete all as specified.

M&L for 15 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:6 finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:4 finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surface wall and applying two coat of cement base paint over one coat of primer complete all as specified and directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mess etc) including all necessary drilling, bolting or riveting etc and similar work including taking down existing mild steel work complete all as specified and directed.

S&F 610mm dia punched tape concertina coil (effective dia 550mm at stretch length of coil 6m) with two handle and spikes at both end of coil with dovetail clips 18 SWG, including razor wire 7 No, 6m length of each wire medium size, barbed length 20mm width 14mm, including 51 pins, 128 nos of clips in each coil including 230gm/Sqm zinc coating on core wire including taking down existing old conceetina coil complete all as specified and directed.

M&L for preparation of previously untreated steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking up cast iron water mains 80mm bore pipe (incl all fittings) with spigot socketed end and lead joints, incl burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron water mains 150mm bore pipe (incl all fittings) with spigot socketed end and lead joints, incl burning out joints and recovering lead complete all as specified and directed.

Supply & laying in trenches 80 mm bore cast iron pipe with spigot and socket ends centrifugally cast class "LA" in any length all as specified and directed. Note:- Earth work and run lead joints shall be measured and paid for separately.

Supply & laying in trenches cast iron pipe 150 mm bore with spigot and socket ends centrifugally cast class "LA" in any length all as specified and directed. Note:- Earth work and run lead joints shall be measured and paid for separately.

M&L in replacement of cast iron sluice valve 80mm dia with stainless steel spindles with flanged ends duly ISI marked confirming to IS 780 part 1, PN-1 type including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

M&L in replacement of cast iron sluice valve 150mm dia with stainless steel spindles with flanged ends duly ISI marked confirming to IS 780 part 1, PN-1 type including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed.

S&F in replacement CI NRV 150 mm bore ISI marked and including jointing materials, i.e. rubber gasket, nuts, bolts and washers etc including testing complete all as specified and directed.

S&F CI fittings for spigot and socket 150mm bore pipe such as bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

All as per item No. 29 above but for fixing only.

M&L for run lead joint to cast iron spigot and socket pipe 80mm bore and fittings including burning out of old lead complete all as specified and directed.

M&L for run lead joint to cast iron spigot and socket pipe 150mm bore and fittings including burning out of old lead complete all as specified and directed.

M&L for flanged joints with rubber fibre board gasket for cast iron pipes 150 mm bore complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connection for removal from site complete all as specified and directed.

All as per item No. 34 above but for 20mm bore pipe.

All as per item No. 34 above but for 25mm bore pipe.

All as per item No. 34 above but for 40mm bore pipe.

All as per item No. 34 above but for 50mm bore pipe.

S&F 15mm bore steel water tubing galvanized medium grade with all fittings of medium grade in (walls, trenches, ceiling and floors etc.) complete all as specified and directed

All as per item No. 39 above but for 20mm bore pipe.

All as per item No. 39 above but for 25mm bore pipe.

All as per item No. 39 above but for 40mm bore pipe.

All as per item No. 39 above but for 50mm bore pipe.

S&F in repair for 20mm bore gun metal, globe or gate valves, with iron wheel hand, screwed both ends for iron pipes complete all as specified directed.

All as per item No. 44 above but for 25mm bore.

All as per item No. 44 above but for 40mm bore.

All as per item No. 44 above but for 50mm bore..

S&F for straight plain brass ferrules (or connecting screws) 20mm bore screwed both ends and fixed complete all as specified directed.

All as per item No. 48 above but for 25mm bore.

S&F in repair bib tap 15 mm bore brass, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Taking down existing UNSV wiring of aviation obstruction light complete from aviation obstruction light to MCB DB ( Approx 50 RM) complete all as specified and directed.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

S&F integral LED aviation light comprising of aluminium housing with polycarbonate enclosure including necessary electric connection with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Bajaj Cat part No. BGAV 302 LED or equivalent in CG/Havells.

Supply, installation/ lowering and commissioning submersible pump set with strove lined non return valve directly coupled with and including induction motor of 35 HP capacity for operation on 415 Volts +/- 10% , three phase , 50 Hz & pump having 5 stage complete with necessary accessories specified by manufacturer, suitable for 1450 LPM discharge of water at 75 meter head including taking up old UNSV submersible pump set all as specified and directed. Make-Penguin/KSB/CG/Kirloskar

M&L for painting of valve pit cover of MS sheet of size n.exc. 0.90MX0.90M with two coat of blue synthetic enameled paint internally & externally including preparation of surface complete all as specified and directed.

S&F in replacement rotational moulded polythylene water storage tanks 500 ltr capacity triple layered ISI marked white colour (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwed for iron pipe 20mm bore complete all as specified and directed.

All as per item No. 56 above but 1000 ltrs capacity.

M&L for demolition of old unserviceable valve chamber and construction of new valve chamber of size 1Mx1Mx1M with brick work comprising the following items complete all as specified and directed. (a) 150 MM thick PCC foundation (1:2:4) type B-2 40mm graded aggregate. (b) Brick work with 1:6 cement mortar and rendering 15 mm thick externally and internally complete fair face of brick works surface in cement mortar 1:4. (c) MS cover of thickness 4 mm double door type welded to angle of size 40x40x5 mm embedded in cement coping in PCC (1:2:4) type B-0 with anchor fastener including locking arrangement complete with two coat of highly corrosive resistant epoxy point over one coat of red oxide primer.

M&L earthing complete with galvanised steel earth plate 600X600X6.3 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth strip of 32X6 mm as earthing leads by means of bolts, nuts, check nuts and washers beside welding/ brazing at all joints as shown on drawings and including excavation, earth work, GI pipe light grade 40 mm bore for protection of GI earth strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B-1 chamber and MS angle iron frame of 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing complete all as specified and directed.

S&F in replacement MS coloumn pipe 150mm bore flange type and 7.1 mm thickness ERW steel pipe including jointing material i.e. rubber packing nuts/ bolts washers etc. complete all as specified and directed.

Supplying, installation, testing, commissioning of LT panel board 3 phase 4 wire system indoor type factory made wall mounting with suitable clamp dust and vermin proof cubical type interlocking arrangement (IP- 55 protection) fabricated with 2 mm thick CRCA sheet with anti corrosion coating & finally polyester powder coated of finite green fully compartment with providing with suitable size of aluminum strip complete all as specified and directed for the following:- (a) Incoming:- (i) On load Change Over Switch 200 Amp, 4 pole-01 No. (ii) MCCB 200 Amp, 4 pole, 415 Volt, 35 KA-01 No. (iii) Digital type Amp Meter 0-200 Amp with CT's- 03 Nos. (iv) Digital type voltmeter 0-500 Volts -01 No. (v) Indicating lamps (RYBG) 01 set of 4. (vi) Aluminium bus bar rating 300 Amps TPN-01 set (vii) Chamber for incoming & outgoing cable. (b) Outgoing:- (i) MCCB, 125 Amp, 4 pole, 415 volt, 35 KA -01 No. (ii) MCCB, 100 Amp, 4 pole, 415 volt, 35 KA -01 No. (iii ) MCB, SPN 32 Amp, 10 KA -03 No. (iv) In built automatic star- Delta starter suitable for submersible Pump upto capacity 50 HP complete with all accessories and wiring complete.

Demolition of cement concrete un-reinforced in ground floors and paving not exc 15 cm thickness below or above ground level complete all as specified and as directed.

M&L for 25mm thick PCC type B-0 1:2:4 using 12.5 mm graded aggregate as in floor complete all as specified and directed.

S&F non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm and n.exc. 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

S&F Glazed ceramic coloured tiles in vertical surface 450x350x7mm thick including highlighter/pattern set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:6 finished surface even and fair complete all as specified and directed.

M&L for 10 mm thick rendering on ceiling surface in CM 1:3 finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surface of wall and applying three coats of white wash as directed.

M&L for preparing new plastered surface of ceiling and applying three coats of white wash as directed.

M&L preparation of old plastered/unplastered surface of wall and applying one coat of white wash complete all as specified and directed.

M&L preparation of old plastered/unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.

S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part-II (2010) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 150 mm long Aluminium anodized barrel tower bolt, complete all as specified and directed.

S&F Aluminium anodized pressed handle, fabricated type of size 150mm, complete all as specified and directed.

S&F single seat WC with PP soft seat cover, hinges, fixing accessories, accessories set and cistern fittings of size 370x685x675mm, P trap-180mm complete all as specified and directed. Make: Jaguar cat No. CNS-WHT851P180SPP or equivalent of specified makes.

S&F toilet paper holder flap recessed type stainless steel complete all as specified and directed. Make: Jaguar cat No. AHS-1553 or equivalent of specified makes.

S&F chromium plated Jet spray health faucet with 1.8 Meter PVC Tube and hook complete all as specified and directed. Make: Jaguar Cat No. ALD-577 or equivalent of specified makes.

S&F urinal with fixing accessories of size 340x320x 650mm complete all as specified and directed. Make: Jaguar Cat No. URS-WHT-13263 or equivalent of specified makes.

S&F thin rim table top basin oval shape of size 500x380x 650mm complete all as specified and directed. Make: Jaguar Cat No. JDS-WHT-25937 or equivalent of specified makes.

S&F pillar Cock 15mm complete all as specified and directed. Make:Jaguar Cat No. VGP-81421 or equivalent of specified makes.

S&F bib cock (straight line model) with wall flange complete all as specified and directed. Make: Jaguar Cat No. FLR-5047 N or equivalent of specified makes.

S&F soap dispenser with glass bottle complete all as specified and directed. Make: Jaguar Cat No. CAN-1135N or equivalent of specified makes.

S&F towel ring square with round flange complete all as specified and directed. Make: Jaguar Cat No. CAN-1121N or equivalent of specified makes.

S&F waste coupling 32mm size half thread with 80mm height complete all as specified and directed. Make: Jaguar Cat No. ALD-709 or equivalent of specified makes.

S&F Urinal wall partition of toughened glass frosted 12mm thick with stainless steel fittings complete all as specified and directed.

S&F CP bottle trap 32mm dia for WHB having minimum water seal 25mm complete all as specified and as directed.

M&L for powder coated anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X44.45X1.50mm and style 47.5x44.5x1.5 mm, lock rail 83.50X44.45X1.50mm and bottom rail 150.00X44.50X2.50mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01 No. mortise lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing, anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.

S&F powder coated anodized aluminium sliding type glazed window shutters with 5mm thick plain sheet glass fixed open track section 100x38x1.5mm having three track (two of glass & one of stainless steel wire cloth) with members of window shutter of section 38x12x1.5mm and other standard Bombay sliding sections including necessary fiber wheel rollers suitable handles to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading etc all as specified and directed at site.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, galvanised wire staples fixed in wooden/steel frame complete all as specified and directed.

S&F 5.5mm thick sheet glass, and glazing oil putty/ beads in square, area n.exc 0.5 sqm in each pane complete all as specified and directed.

Taking down eaves gutter and rain water pipe any size and pattern including all fitting complete all as specified and directed.

S&F cast Iron soil waste & vent pipes 75mm bore, in any length with or without ears, with cement joints , fixed to walls with & including fixing arrangements complete all as specified and as directed.

All as per item No. 98 above but of 100mm dia.

S&F cast Iron soil waste & vent pipes 75 mm bore, in any length with or without ears , with cement joints , fixed to walls with & including fixing arrangements complete all as specified and as directed.

All as per item No. 100 above but of 100mm dia.

S&F 75mm dia cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

S&F cast iron bends (any radius) with duck's foot or heel rest, for 75mm bore of pipe complete all as specified and directed.

S&F cast iron bends (any radius) with duck's foot or heel rest, with oval access doors for 75mm bore of pipe complete all as specified and directed.

S&F cast iron bends (any radius) with duck's foot or heel rest, for 100mm bore of pipe complete all as specified and directed.

S&F cast iron bends (any radius) with duck's foot or heel rest, with oval access doors for 100mm bore of pipe complete all as specified and directed.

S&F cast iron cowl 100mm bore of pipe complete all as specified and directed.

S&F 75mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 100mm dia CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75 mm dia CI junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 75 mm dia CI junction single, (Single T) equal or unequal with oval access doors complete all as specified and directed.

S&F 110 mm dia CI junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm dia CI junction single, (Single T) equal or unequal with oval access doors complete all as specified and directed.

S&F stack clamps made out from 50 x5mm size flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore of pipe etc complete all as specified and directed.

S&F stack clamps made out from 50 x5mm size flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore of pipe etc complete all as specified and directed.

M&L for PCC, type E-2, 1:5:10 using 40 mm graded aggregate as in sunken portion, mass filling concrete complete all as specified and directed.

S&F bitumen for water proof and damp proof treatments any grade 1.20 Kg per sqm complete all as specified and directed.

S&F bitumen primer for use in water proofing and damp proofing treatments @ 0.20 ltr per sqm complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on any face of brick walls/ concrete surfaces finished even and smooth without using extra cement mixed with liquid WPC @ 3% by weight of cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately

Supply only liquid water proofing compound.

M&L for 25mm thick PCC type B-0 1:2:4 using 12.5 mm graded aggregate as in floor concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F 25 micron black polythelene paper laying on sunken portion area complete all as specified and directed.

S&F 40mm bore steel water tubing galvanized light grade to be fitted in sunken portion complete all as specified and directed.

M&L for 18-20mm thick machine cut pre-polished granite stone slab of approved shade and colour as in wash basin platform, or on vertical surfaces including vertical projection, rounding or chamfering the edge laid over screed bed 15mm thick in CM 1:4 jointing , pointing and rubbing polish to achieve mirror finish complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light/fan/bell/socket or power complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceilings complete all as specified and directed.

M&L for one light/fan point controlled by one switch point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete all as specified and directed.

All as per item No. 128 above but for one socket outlet 3/5 pin 5/6 amps independent controlled by one switch.

All as per item No. 128 above but for one socket outlet 3/5 pin 5/6 amps independent controlled by one switch on same board.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken modular type pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 128 to 131 :- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

S&F modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular switch single pole 1 way, 1 module, 16 Amp complete all as specified and directed.

S&F ceiling rose surface polycarbonate 65X50mm three terminals complete all as specified and directed.

S&F lamp holder polycarbonate insulated body with back plate suitable for batten fittings complete all as specified and directed.

M&L for replacement sub main wiring with 4 Nos single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable and 2 Nos single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 4 No 6.0 sqmm conductor cable, 2 No 4.0 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

M&L for replacement sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

S&F in replacement sheet metal enclosure (MCCB DBs) three phase and neutral with 200 Amps rated bus bar 4 way double door type complete all as specified and directed.

S&F in replacement sheet metal enclosure (MCB DBs) three phase and neutral with 200 Amps rated bus bar 4 way double door type complete all as specified and directed.

S&F in replacement sheet metal enclosure (MCB DBs) single phase and neutral with 200 Amps rated bus bar 8 way double door type complete all as specified and directed.

S&F in replacement MCCB, 4 pole, 125 Amp 415 volts 16KA breaking capacity complete all as specified and directed .

S&F in replacement MCB TP 63 Amp 415 volts 10KA breaking capacity 'C' curve complete all as specified and directed .

S&F in replacement MCB TPN 63 Amp 415 volts 10KA breaking capacity 'C' curve complete all as specified and directed .

S&F in replacement MCB, SPN, 32 to 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement MCB, SP, 10 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

M&L for earthing complete as in replacement with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.

S&F in replacement 9 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No.LHEXBXPNIN1W009 or equivalent in Bajaj /CG.

S&F in replacement LED lamps 9 watts complete all as specified and directed. Make:- Havells Cat part No. LHLDEUEEMC8R009 or equivalent in Bajaj /CG.

S&F exhaust fan single phase 230/240 volt AC 300mm sweep, 1400 RPM, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making good to match the existing surface and making connation with twisted copper flexible wire 23/0.0076mm and writing MES No with black paint complete all as directed. Make: Model No. Trans Air 9" of CG or equivalent in Havells/Bajaj/ Almonard

S&F wall mounted fan complete AC 240 volts 50 Hz single phase of size 400mm sweep including making connection from ceiling rose to fan connector complete all as specified and directed. Make : Model Flatina HS of Havells of equivalent in Crompton / Usha/ Bajaj

M/S Rajeev Kumar

M/S Satyam Associates

RVRconstructon

HARI OM CONSTRUCTION

Saraswati Constructions

PANDEY TRADERS