Special Repair to toilet in building no. P-1 to P-4 of Demo Coy, Special Repair to roof treatment of Bld No NC - 77 of Adjt Branch office complex and Provn of Septic Tank and Soakage Pit in Academy HQ at Mil Stn Gaya

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing from the site.

M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry sand 1 : 1 (by weight) complete.

Roughening surfaces of old concrete flooor by picking, sweeping clean and washing down with water to remove dust etc.

M&L Providing water proofing treatment over cleaned roof surfaces with super thermo APP modified water froofing membran comprssing of following for non -approachable roof: (i) Cleaning sweeping and washing and down with water to remove all dust etc from plastred roof surfaces/wall and filling of crack with sealing compound etc. (ii) Bitumen based primer conforming to IS 3384-1965 at 0.30 kg per sqm. (iii) One layer of super thermo APP modified water proofing membran with non polyster reinforcement of Make (M/S STP texsa Ltd/hyperplus membrane of M/S IWL India Ltd. M/S STP and Tikki Tar Ltd ) 3mm thick and minimum weight @ 3.50 Kg/sqm laid with gas torch and fasted on roof surfaces with roller. The over laps shall be sealed by flame including vertical surfaces after cutting necessary grooving and making good with PCC gola 1:2:4 type B1 etc adhere to bitumen all as per manufacturer instructions. (iv) Applying two coat of aluminium paint @ 0.20 kg/sqm per coat over bitumen layers as per manufacturer instruction (application including sider lap overlaps shall be provided not less than 10cm and jointed sealed with torch as per manufacturer instruction specification including taking down existing APP membrane and removing upto 500 mtr away from working site complete.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.

M&L Rendering 15mm thick internal surfaces on brick work in cm 1:6 and finishing surfaces evev and fair without using extra cement complete.

M&L Rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC as per manufacturer instructions. Note :- WPC shall be measured and paid separately

M&L Rendering 10 mm thick on fair faces on concrete surfaces (Roof slab) in CM 1 :4 with water proofing compound as per manufacturer insruction and plastered surfaces finished fair and even complete all as specified and directed. Note :- WPC shall be measured and paid separately

M&L Rendering 5mm thick on ceiling surfaces in CM 1:3 finished even and fair without using extra cement.

Supply only liquid water proofing compound

M&L for (a) Surface Preparation :- Remove all loose gravel, dirt, oil, grease and foreign matter by jet of dry air and clean the existing surface mechanically or by grinding to make it smooth before application. Repair all cracks in the surface by cutting "V" groove and fill with Plastiseal (crack sealer) of STP Make. Provide 50mm x 50mm coving made out of PMC mortar as above. Sealing all joints of stones placed at the terrance/vertical surfaces. Plantation presentation at existing surface to be removed completely. (b) Prime the surface with a Shaliprime WP WB (Water based Anti Root Primer) @ 400 gsm/sqm (c) Supply and apply 1st coat @ 1kg per sqm of single component elastomeric modified polyurethane of STP make ShaliUertane BTD having an Elongation, % ASTM D 2370, 400 (+/-) 50, Tensile strenth,(MPa) ASTM D 2370,0.2, Adhesion to primed concrete, Pull of strength, (MPa) ASTM D 4541, 0.40, Extension after heat aging, mm, ASTM C 836, 6, crack bridging at low temperature, ASTM C 836, No cracking. Water Absorption % ASTM D 471, < 5 over the primed surface. (d) Supply and apply shaliGeo fibre textile of 40 GSM/ Glass Fiber cloth with an overlap of 50 mm on both sides over first coat when the surface is tacky. (e) Supply and apply 2nd coat @ 1kg per sqm of single component elastomeric modified polyurethane of STP make ShaliUertane BTD having an Elongation, % ASTM D 2370, 400 (+/-) 50, Tensile strenth,(MPa) ASTM D 2370,0.2, Adhesion to primed concrete, Pull of strength, (MPa) ASTM D 4541, 0.40, Extension after heat aging, mm, ASTM C 836, 6, crack bridging at low temperature, ASTM C 836, No cracking. Water Absorption % ASTM D 471, < 5 over the DTP make ShaliGeo textile of 40-50 gsm/ Glass Fiber Cloth.

M&L Preparation of surfaces and applying two coats of acrylic distemper on new walls complete all as specified and as directed.

M&L 1 mm thick of Birla white putty/JK white wall care putty on new plastered surfaces and making the surface uniform & smooth.

M&L Preparation of old plastered surfaces and applying one coat of acrylic distemper on walls complete all as specified and as directed.

M&L Two coats of exterior acrylic (100%) emulsion paint tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg all as specified & directed. Make :Asian Paints (Apex Ultima)/ Berger paint (All Guard)/Nerolac (Excel Total)

M&L One coat of exterior acrylic (100%) emulsion paint tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg all as specified & directed.Make :Asian Paints (Apex Ultima)/ Berger paint (All Guard) / Nerolac (Excel Total)

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as directed.

S&F Powder coated aluminium partition, frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

Supply only 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixing with rubber gasket with aluminium frame not exc 0.5 sqm in each pane.

Supply only Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples

S&F 5.5 mm thick sheet glass tinted single reflective quality and glazing with oil putty or fixing rubber gasket with aluminium frame in each pane

M&L 9mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work.

M&L Applying two coats of acrylic emulsion paint on cement/concrete surfaces over a coat of priming paint of plaster surfaces including preparation new or previously untreated surfaces.

Dismantling floor, hearth or wall tilling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises.

M&L Providing 75 mm thick,cement concrete1:3:6 type C-2 (using 40mm graded crushed stone agg) as in sub base of floor.

S&F Vitrified tiles of size 600x600x10 mm thick of double charged (square/ rectangular) area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1 : 6 complete all as specified and directed.

S&F Vitrified tiles of size 600x600x10 mm thick of double charged (square/ rectangular) area of each tiles not exceeding 0.36 sqm, in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1 : 4 complete all as specified and directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed in CM 1 : 6 complete all as specified and directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1 : 4 complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15 mm thick cement mortar in CM 1:4

M&L Providing 75 mm thick,cement concrete1:3:6 type C-2(using 40mm graded crushed stone agg) as in plinth protection and simillar works finished even and smooth without using extra cement. Note: Joints 12 mm wide to the full depth of PCC shall be provided at every 3 m and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provn shall be deemed to be included in the quoted rate

Cuttting holes superfacial area exc 150 sq cm but not exc 400 sq cm into or through brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar and making good in cement concrete 1 : 2 : 4 type B1 as required complete all as specified.

M&L Precast cement concrete block masonry type B-1, 1:2:4 (Using 20 mm graded stone aggregate) set in CM 1:4 complete all as specified and as directed.

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips

S & F Chicken wire mesh made out of low carbon wire 0.36mm thick, annealed, mesh size ( dist between the faces of hexagon) 13mm fixed with nails complete all as specified and as directed.

M&L Providing precast PCC type C-1, 1 : 3 : 6 (using 20 mm graded aggregate) as in kerbs, rounded or chamfered on edges complete as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Fixing only Mild steel galvanised tubing of 15mm dia bore with all fittings and fixed complete to walls and ceilings or laid in floors

Fixing only Mild steel galvanised tubing of 20 mm dia bore with all fittings and fixed complete to walls and ceilings or laid in floors

S&F Mild steel medium grade galvanised tubing of 15mm dia bore with all fittings and fixed complete to walls and ceilings or laid in floors

S&F Mild steel medium grade galvanised tubing of 20 mm dia bore with all fittings and fixed complete to walls and ceilings or laid in floors

Disconnecting existing water storage tank of capacity exc 1000 ltr & not exc 2000 ltr, setting aside (for lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position.

S&F 1000 Lrts capacity Rotational Moulded ploythene water storage tank (cylinderical vertical with closed top ) hoisted and fixed in position incl dismantling of existing tanks all as specified in directed by Engr-in-charge.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place Make- Reliance,fnolex,Supreme, Kisan, Prince all as specified and as directed.

S&F 110mm dia bore PVC ( SWR )bends Make-Reliance,finolex,Supreme, Kisan, Prince all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls. Make- Reliance, fnolex,Supreme, Kisan, Prince all as specified and as directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil etc complete.

Excavation in trenches not exc 1.5m wide and exc 1.5m and n.exc. 3.0 m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil etc complete.

Excavation in trenches not exc 1.5m wide and exc 3.0m and n. exc 4.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil etc complete.

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete.

Removal of excavated materials to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 100 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate complete

M&L Cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate complete

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete.

S&F PVC (SWR) junction double, (double T) equal or un equal of 110 mm bore of pipe complete.

S&F PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

M&L RCC NP-3 drain pipes laid and jointed complete with collars in trenches of 150 mm internal diameter of pipe complete.

M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work using old size with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete all as specified and directed.

M&L Rendering on brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and fair with out using extra cement complete.

M&L Rendering of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth with using extra cement complete.

Supply only integral water proofing compound

M&L PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, drains and channels etc and similar work incl form work.

M&L Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab (for manholes etc) and similar work incl form work and set in CM 1:6 complete

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick for rough finished flat surface of concrete complete

M&L Mild Steel TMT bar 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with & incl Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings and similar work complete.

M & L Plain Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in mass concrete or filling in foundations.

M & L Plain Cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete.

M & L Cutting into existing manholes for connecting new drains for 150 mm bore pipe, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Taking up or down 15 mm bore steel tubing and connections,including cleaning for refixing or removal from the site.

Taking up or down 20 mm bore steel tubing and connections,including cleaning for refixing or removal from the site.

Demolition of RCC roof , floors (other than ground floors) beams, staircases, landing, chajjas ,RCC tank over roof and similar works

Cutting & screwing existing steel tubing of 25 or 32 mm dia without taking down for addition or alteration complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick walls built in CM (1:4) all as spfd.

S&F 1000 Ltr Rotational moulded polythylene water storage tank (multi layers cylinderical vertical with closed top) hoisted and fixed in position including 20mm dia PTMT float valve & ball complete all as specified and as directed. Make- rotex/sintex/ Polywell/Polycon

S&F 20mm dia PTMT float valve & ball complete all as specified and as directed. Make- rotex/sintex/ Polywell/Polycon

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in any position of capacity exc 500 ltr & not exc 1000 ltr complete all as specified and directed.

S & F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests Water closet (Squatt pattern) complete including provision of lime concrete bedding

Taking down chowkhats or frames not exc 1.5 Sqm (without taking shutters from the frame).

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.00 Sqm (without taking shutters from the frame).

Taking down of shutters exc 1 sqm and not exc 2 sqm each shutters and refixing in same opening.

Taking down of shutters exc 1 sqm and not exc 2 sqm each shutters and refixing in other opening.

Demolition and breaking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortor any size internal dia of pipe complete all as specified and directed.

M&L Rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge.

M & L 1 mm thick birla white putty/JK white wall care putty and making the surfaces smooth & uniform including removing existing treatment or preparation of new plastered surfaces all as specified and as directed.

M&L One coat of cement base paint white or tinted on walls or fascia of roof or chajjas on including complete removal of existing treatment on old decorated prepared plastered/painted surfaces of bldg all as specified & directed.

M&L Two coats of cement base paint white or tinted on walls or fascia of roof or chajjas on new plastered of wall all as specified & directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame

M&L 25 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of floor complete

M&L10 mm thick rendering/backing coat on other than fair faces of brick wall in CM 1:4 to receive wall tiles on risers of steps, columns, dado/skirting , pillar etc complete.

S & F Glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match .

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make-SEIKO/Plumber/Parryware/Essco)

S & F in repair 15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms)

S&F Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F Gun-metal, globe or gate valves 25mm, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair 15 mm dia stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. (Make-SEIKO/Plumber/ Parryware/ Essco)

S&F in repair 15 mm dia stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions. (Make-SEIKO/Plumber/ Parryware/ Essco)

S&F in repair PVC flushing cistern syphonic action type, 10 liters capacity, low level white with inlet ball valve, float and handle including bracket including PVC flush pipe, 32mm dia as fixed in repairs complete all as specified and directed. (Make : Hindware (Sleek)/Commander (Slim)/Parryware)

S&F 15mm dia PVC connection 45cm long with brass check nuts fixed as in repairs.

S &F in repair swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) all as specified and directed by Engr-in-charge. (Make-Prayag /Pollytuff)

S&F Brass chromium plated soap tray/dish with CP screws etc complete all as spd (Make-SEIKO/ Plumber/parryware/Essco)

S & F Vitreous Cliina wash basin, wliile, flat back, 550x400mm including CP waste coupling 32 mm and PVC waste pipe and brackets complete as in repair. Make : Hindware/Parryware

S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. (Make-SEIKO/Plumber/Parryware/Essco)

S& F Sheet glass shelf 5.5mm thick and 120mm wide with chromium plated bracket guard and railing 60 cm long all as specified and as directed.

S&F PVC ( SWR ) nahani ntrap / floor trap 75 mm dia all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince

S&F Grating steel chromium plated 125 mm dia fixed on floor trap/Nahani trap in cement mortar 1:4 as specified and as directed. Make -Seiko, plumber, prayag, parryware

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place Make- Reliance,fnolex,Supreme, Kisan, Prince all as specified and as directed.

S & F 75mm dia bore PVC ( SWR ) bends Make-Reliance, Finolex, Supreme, Kisan,Prince all as specified and as directed.

S&F PVC(SWR) 110 (T) with access door Make-Reliance/finolex/ Supreme/Kisan/Prince all as specified and as directed

S&F PVC(SWR) 75 (T) with access door Make-Reliance/finolex/Supreme/Kisan/Prince all as specified and as directed

S&F 75mm dia bore (SWR) branch piece, single (singleY) equal or unequal Make-Reliance,finolex,Supreme,Kisan,Prince all as specified and as directed.

S&F 110mm dia bore (SWR) branch piece, single (singleY) equal or unequal Make-Reliance,finolex,Supreme,Kisan,Prince all as specified and as directed.

S&F 75mm dia bore PVC (SWR) vent cowl

S& F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified (ISI marked)

S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified. (ISI marked).

S&F 150mm long size extruded aluminium alloy handles, cast type anodised complete as specified (ISI Marked).

S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fix complete all as specified and directed.

M&L Preparation of old painted surfaces of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified and direcetd.

S&F Powder coated Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised and fixed 100 mm long type C-21

M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in 75mm PCC Sub base

Taking down carefully copper/aluminum point wiring (light/fan/socket power) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfases of walls, floors, etc.

Taking down main switches/DBs along with existing board incl removing the same from site and makinf the good to the disturbed surface completeexisting sub main wiring of any size & type and description including removal of teak wood batten/pipe etc complete.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit 20 mm dia and all accessories Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for the following: -

One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way

One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board.

M&L Switch socket combination multipurpose 2 in 1,5 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

M&L Switch socket combination multipurpose 2 in 1, 5& 15 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

S&F 3 pin socket outlet point 15 Amps independent, with cables of size 2.5 sq mm multistranded, PVC insulated unseathed FR copper conductor cable, and 1.5 sq mm PVC insulated unseathed copper conductor cable as earth continuity conductor connected to common earth dolly all are in separate PVC conduit med grade not less than 20mm dia ISI marked ivory colour, incl. provn of sunken galvanised not less than 1.12 mm thick MS sheet pressed terminal boxes of suitable size & 3 mm thick laminated hylem sheet top cover of required size all as specified and directed by Engr-in-charge.

S &F Switch Piano Flush button single pole one way 5 Amp complete all as specified and directed. Make: Anchor/ Havells/ SSK

M&L Scket outlet 3/5 pin 5Amp flush type complete all as specified and directed. Make: Anchor/ Havells/ SSK

M&L Switch Socket combination 2 in 1 , 5 pin, 6 Amps flush type.

M&L Switch socket comination 3 Pin 16 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

S&F in replacement of batten suitable for T8 retofit LED tube 18/20 watt with alluminium excusion in 'D' shaped having large diameter all as directed and specified by Engr-in-charge. Product code- DMLNILT816 of Crompton Greaves or equivalent Havells/Bajaj/HPL

S&F Tube in replacemet of its existing ballast with LED tube 20 watt (T-8) with aluminium excusion in 'D' shaped having larger diameter and including single core copper solid wire internally all as directed and specified by Engr-in-charge. Product code- LT8-20-865-2 of Crompton Greaves or equivalent Havells/Bajaj/HPL

S&F in replacement of sheet metal enclousure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type complete all as specified and directed. Make : Legrand/ Havells/L&T

S&F in replacement of MCB SPN capacity upto 40 to 60 Amps DP 240V complete all as specified and directed. Make : Legrand/ Havells/ L&T

S&F in replacement of MCB SP up to 40 Amps 240 volts complete all as specified and directed. Make-Havells/legrand/ L&T

S &F in existing Aluminium bus bar chamber for wall mounted type (3 Phase & Neutral) with busbar rating capacity 100 Amp (04 Nos of strip) with 4 way type fixing in wall including enclosure complete all as specified and directed by the Engr-in-charge.

M&L Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete. (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively)

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16sqmm 4 core Make-Polycab/Havells/KEI

M&L in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area16sqmm 2 core Make-Polycab/Havells/KEI

S&F Metal Exhaust Fans 300 mm sweep, Energy saving fans, 230 v, 50 HZ Complete

M&L Ceiling rose , 3 terminal polycarbonate complete all as specified and directed. Make: Anchor/ Havells/ Philips

Excavation in trenches n exc 1.5 m wide & n exc 1.5 mtr deep in soft/lose soil for taking out pipe & laying of pipe & getting out for diverting of CI pipe line complete all as directed.

M&L Bricks common burnt sub class B designation for protection of cable complete all as specified and directed.

M&L Natural local river sand for cable protection .

M &L GI tubing40mm dia light grade with all fittings laid in trench/making GI bracket of security lights/provn for ceiling fan point including bending of suitable size/support of UG cable as required at site as directed by Engineer-in- Charge.

M&L Switch socket comination multipurpose 2 in 1,5 and 15 Amp Flush type ISI Marked complete all as specified and directed. Make: Anchor/ Havells/ SSK

M&L in replacement of sub main wiring with two single core pvc insulated unsheathed FR copper conductor 1100 volt grade multistandard of size 2.5 sqmm and incl drawn through and including non metalic rigid pvc conduit and couduit accesssories of 25 mm external dia and conduit accessories of ISI marks medium grade including 1.5 sqmm copper wire for earth continuity wire and connected of common earth dolly. Make of Wire : polycab/Havells/ Plaza . Note:- One run of conduit two run of 2.5 sq mm copper conductor & one run of 1.5 sq mm copper conductor is measured as one unit.

M/S SANJAY KUMAR YADAV

RAMRAS BUILDERS

M/s Vinay Kumar

UMESH SINGH

SHAILENDRA KUMAR