864/WS-59/2022-23

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch socket outlets, light fittings etc and making good disturbed surfaces of walls with cement mortar and white/colour wash to match with existing surfaces etc complete all as directed by Engineer -in -Charge .

M&L for point wiring with single runs PVC insulated FRLS grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sq. mm (Nominal area) (ISI Marked) drawn in and including PVC casing capping of suitable size with all fittings and accessories including PVC flush box/ Metal flush box/ sunken box of suitable size and drawing continuous earth wire of PVC insulated FRLS grade, unsheathed stranded copper conductor of size 1.5 Sqmm(ISI Marked) terminated the box for following type of point wiring including making good disturbed of wall completed all as directed by Engineer-in- Charge.

For one light ,fan,3 pin socket outlet 5/6 Amps and bell point independent controlled by one, one way normal/modular Switch.

For one 3 pin socket outlet 5/6 Amps point on same board.

For one 3 pin socket outlet 5/6 Amps independent point but below the switch board on same board.

All as per Item No. 2 here-in-before but with FRLS grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 2.5 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLS grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

Bell push, flush type, 5/6 Amps, single pole, 230 V completed all as specified and directed.(ISI mark)

Buzzer, ding dong, AC, 230 V, Single pole completed all as specified and directed.(ISI marked)

Switch piano Single pole 240 volts, flush type, one way 5Amps complete all as specified and directed. (ISI marked)

Socket outlet 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed.(ISI marked)

Switch socket combination 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. (ISI marked)

Stepped type fan regulator flush type complete all as specified and directed.

Modular fan regulator electronmic rotary , 0-4 steps stepped type 100 watt 240 volts 50Hz hum free 2 module with modular plate and frame complete all as directed.

S&F Modular switch one way 6 Amps, one module with modular plate and frame complete all as directed.

S&F Modular switch one way 16 Amps, one module with modular plate and frame complete all as directed.

S&F Modular bell push with modular plate and frame complete all as directed.

S&F Modular socket 6A/16A 2/3 pin combined 2 module with modular plate and frame complete all as specified and directed.

S&F modular socket 6 Amps-2/3 pin combined two modules with moduler plate complete all as directed.

S&F LED light fitting fixture 20W, decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly energy efficient ready to use complete all as specified and directed.

S&F lamp holder, insulated body, with back plate for batten fitting with LED 7 to 9 lamp complete.

M&L for ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed.

S&F in repair/replacement of surface/Recess mounted LED luminaire with complete diffuser 34/36W , 2'x2', Flat Panel powder coated CRCA housing, heat sink complete all as specified and directed.

S&F in repair/replacement of surface/Recess mounted LED luminaire with complete diffuser 34/36W , 1'x4', Flat Panel powder coated CRCA housing, heat sink complete all as specified and directed.

S&F in repair/replacement of 10/13.5 Watt 6000K LED Bulk head luminaries with premium quality diffuserfor glarefree light , etc complete with accessories complete all as specified and directed.

S&F in repair/replacement of round/square surface/recess mounted LED downlighter panel with complete diffuser 15/18W complete all as specified directed.

S&F in repair/replacement of round/square surface/recess mounted LED downlighter panel with complete diffuser 9/12W complete all as specified directed.

S&F LED Mirror light fitting 1 x10 W 6500K decorative ultra slim linear LED lighting fixture with extruded AL. heat sink, environmental friendly, energy efficient, complete all as specified and directed.

S&F in repair/replacement of LED Driver suitable for 40/36 watts LED 2' x 2' panel suitable for any type any make of 230 volts domestic use complete all as specified and directed.

S&F LED Driver suitable for 9/15/18 watts LED down light suitable for any type any Make LED fitting of 230 volts domestic use complete all as specified and directed.

Supply only LED bulb 7 watt, B22/E27 including taking out old unserviceable one complete all as directed by Engineer -in- Charge.

S&F in repairs Candle lamp energy saving LED type 5/7 watt E27(warm type). Make : Philips/wipro/Bajaj

S&F in repairs Candle lamp energy saving LED type 3/5 watt E14(Warm type) . Make : Philips/wipro/Bajaj

S&F in repair /replacement of LED light of capacity 20 Watt 6000K flood light with IP 65 protection complete all as specified and directed.

S&F in repair /replacement of LED security light of capacity 35/40 Watt 6000K with IP 65 protection complete all as specified and directed.

Taking down old UNSV ventilating fan re-fixing the same after repair / replacement of burn out fan motor for 150mm to 250mm sweep 230 Volt, 50Hz AC supply complete all as specified and directed by Engr-in –Charge.

Supply & fix in repair / replacement of PVC fan blade of size 150mm to 250mm sweep suitable for ventilating fan, complete all as specified & directed by Engr-in-Charge.

Taking down old unsv/burn out wall mounted fan and re-fixing the same after repair/replacement of burn out fan motor with pull cord control suitable for 400mm sweep 230 Volt, 50Hz suitable for wall mounted fan, complete all as specified and directed by Engr-in-Charge.

Taking down old unsv / rusted storage water heater and refixing the same after repair/ replacement of outer body with in built siphon assy inner tank filled with insulating material complete all as specified and directed by Engr - in-Charge.

S&F in repair/replacement of distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 100 Amps rating with rupturing cap 16 KA and 12 Nos of MCB SP 63 Amps of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer -in- Charge including taking down old unserviceable MCB distribution board.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engineer -in- Charge including taking down old unserviceable MCB distribution board.

Supply and fix MCCB four pole , 415 Volt, 125 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed as in repairs.

Supply and fix in repair /replacement of MCCB four pole , 415 Volt, 160 Amps,16 kA , adjustable thermal & fixed magnetic setting complete all as specified and directed as in repairs .

Supply and fix MCB SPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity, 'C' series complete all as specified and directed including taking down old unserviceable one.

Supply and fix MCB SPN, 240 Volts, 32 Amps, 10 kA rupturing capacity, 'C' series complete all as specified and directed including taking down old unserviceable one.

Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed.

Supply and fix MCB SP, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed.

Supply and fix MCB SP, 240 Volt, 63 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed.

M & L for sub main wiring with two runs of 6.0 Sqmm FRLS grade (ISI mark) PVC insulated, multi stranded, unsheathed copper conductor and one run of , PVC insulated ,multistranded FRLS grade (ISI mark) unsheathed copper conductor of size 6.0 Sqmm green colour as earth lead including PVC casing caping of suitable size complete all as specified and directed, including taking down old unservicable sub main wiring .

M & L Sub main wiring with two runs of 10 Sqmm FRLS grade, (ISI mark) PVC insulated, multi stranded, unsheathed, copper conductor and two runs of, PVC insulated multistranded FRLS, grade (ISI mark) unsheathed copper conductor of size 10.0 Sqmm green colour as earth lead including PVC casing capping of suitable size, complete all as specified and directed, including taking down old unservicable one.

S&F Wall bracket decorative SS finish with opal PC diffuser suitable for 7/9 watt LED bulb of B22 base complete all as directed. Make: Havells/ wipro/ Philips.

S&F Wall/Bed light LED light fitting of capacity 2.5watt complete all as directed.

M&L Earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm and 6 mm thick buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:2:4) type B1, with 50mm thick RCC cover and handle for lifting of cover, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Taking down carefully storage type water heater (geyser) of any capacity/make/model from its existing position after disconnecting electric and water supply connections, dismantling various parts and refixing in the same position after cleaning the inner tank including testing complete all as directed by Engineer-in-Charge.

S&F the following new spare parts of various type/make of geysers of ISI marked components complete all as directed by the Engr-in-charge. :-

Heating element, any type 1.5/2.0KW rating capacity, with rubber washer.

Thermostat switch automatic, of 50/25 litres capacity Geyser.

PVC connection pipe, heat resistive type, 15mm bore (internal) fixed with adopters both ends complete.

Neon lamp /indicator lamp complete with holder.

Apparatus plate/syphone assy with rubber gasket including nuts, bolts and washers any type match to existing 25/50 ltrs geyser one complete.

S&F in rapair of Insulating material (Glass wool) suitable for storage type water heater of any capacity.

Spring loaded air release valve .

S&F in rapair of Stop cock,15mm bore, chromium plated complete all as directed by the Engr-in-charge.

M&L Wall fastner of size 100mm long, 8mm dia with double washers grouting making good in walls with cement mortar 1:4 for fixing water heater after removing the existing unserviceable wall fastner including nuts /bolts and washers complete all as directed by the Engr-in –Charge.

M&L Repair of leakage/cracked inner copper/steel container of water heater by means of brazing/soldering with copper brass alloy & testing of inner shell up to the entire satisfaction of the Engr-in-Charge complete all as directed by Engr-in-Charge.

S&F Plug top, 3 pin , 15 Amps, (ISI marked) as in repairs complete all as specified and as directed.

Dismantling and taking out burnt out winding by cutting, cleaning slouts and re-winding of exhaust fan motor 200mm/350 mm of any make of fan with super enameled copper winding wire of existing gauge including, sleeve work, varnishing with E class insulation varnish, threading complete all as specified and directed (Note :- (i) Doctor brand or equivalent ISI brand varnish shall only be used) (ii) Motor shall be wound with machine only. (iii) BIC/HTP or DEVIDYAL, make super enameled copper winding wire shall only be used.

Supply only socket (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed.

Dismantling and taking out burnt winding by cutting, cleaning slouts and re-winding of AC ceiling fan motor1200mm/1400mm of any make of fan with super enameled copper winding wire of existing gauge including, sleeve work, varnishing with E class insulation varnish, threading complete all as specified and directed (Note :- (i) Doctor brand or equivalent ISI brand varnish shall only be used) (ii) Motor shall be wound with machine only. (iii) BIC/HTP or DEVIDYAL, make super enameled copper winding wire shall only be used.

M&L for gun metal bush of ceiling/exhaust fan complete all as specified and directed.

M&L for capacitor AC 230/240 volts 2.5/3.15 mfd oil filed ISI markedcomplete all as specified and directed. Make: L&T/Havells/Epcos.

S&F in repair/replacement of PLC 9/10W LED with high efficacy suitable for existing G24 lamp holders complete all as specified and directed.

S&F in repair/replacement of PL-L 18W LED with high efficacy suitable for existing 2G11 lamp holders complete all as specified and directed.

M&L for 6.0 Sqmm 1100 Volts grade, heavy duty PVC insulated multistranded solid aluminium conductor cable and overall PVC sheathed in service connection including taking down old, complete all as specified and directed by Engineer-in-Charge.

M&L for 10.0 Sqmm 1100 Volts grade, heavy duty PVC insulated multistranded solid aluminium conductor cable and overall PVC sheathed in service connection including taking down old, complete all as specified and directed by Engineer-in-Charge.

Top Mind Industries Pvt Limited

M/S Vijay Constructions

YATTOO ENTERPRISES

M/S FAISAL TRADING CO.

Alishan Builders