SPL REPAIR TO CERTAIN BLDGS PROVN OF HIGH MAST LIGHT AND CERTAIN MINOR WORKS AT VARIOUS LOCATIONS UNDER AGE BR I AND AGE EM OF GE BENGDUBI

Amount

Providing and laying world squash federation (WSF) approved squash court hard plaster 12mm to 15mm thick in two layer fiber glass reinforced cement based for liveliest and rebound action due to superior rigidity and hardness alongo line surface toughness that resist wear, splintering, abrasion, chipping and stress, red game line with 5 year warranty for hard plaster against damage complete all as per manufacturer specification,specified and directed.

Providing and fixing wooden flooring system maple hardwood sports floor(BWF certified) EN north american talle hardwood maple size :20 mm thick x 57/83 mm width tounge & groove system 38 mmx63.5 mmx1.22 meter treated pine wood sleepers installed at 9" (23 cm) distance with 19 mm thick power pads sanded,klin& dried treated with vapour barrier of 6mil polythene laid on PS, including providing self levelling corse with ardex cl-I (self smoothening) cementitous underlay in avg 3-4 mm thickness with primer ardex P-51(for porous surface) for first coat diluted with water 1:1 or non porous surface use Ardex P-82 as primer in single coat after completion of surface preparation repair of pot holes/ crack/joint filling etc with repair mortar and complete as per ardex guideline complete in all respect as per manufacurer specification,specicified and directed.

S&F 10mm thick toughned glass pannel chamfered edge with necessary making hole for fixing with stainless steel frame and sealing the sides with silicon gel and stainless steel L- shaped fastners in ground for support complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Supply only integral water proofing compound liquid grade conforming to IS-2645 complete all as specified and directed. (Pidiproof of Dr.fixit or equivalent)

M&L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan to any radius as in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) area not exc. 1.5sqm each, including cutting holes for removing the hold fast,making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, including cutting holes for removing the hold fast, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and direcetd.

S&F 150mm size aluminium handle cast type complete all as specified and directed.

S&F mortice lock vertical type barss 100mm size 4 levers complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as secified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

M&L for MS framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe -410-W(Gde-E-250) quality-A. complete all as specified and directed.

S&F Welded steel wire fabric weight not exc. 4.0 Kg/Sqm to wood or steel members complete all as specified and directed.

S&F steel window with side hunge shutters including projecting type hinges with steel handle and steel peg stey, tower bolts etc. complete with glazing bars dovetailed or welded complete all as specified and directed.

M&L for 1.25mm thick pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed.

M&L for Non Skid ceramic tiles (coloured) 7 to 8 mm thick , (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm as in floor etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and directed

Dismantling of floor, hearth or wall tiling / Paving Blocks including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for sheet glass, 4mm thick, ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm each pane complete all as specified and directed.

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness size quality and discription) for metal frame exc 1.5 sqm including punching, drilling out old glazing pins / spring clips and providing new ones complete all as specified and directed.

M&L for preparation of untreated new wood/wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old treated steel surfaces of any description over 10cm in width or girth including preparation of surfaces complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling wall and ceiling board( fiber, pulp, insulation, etc.) or insulation board/slab/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for newly plastered surface of wall appying two coat of white or tinted oil bound distemper over one coat of alkali resistant priming paint including 02mm thick wall care putty etc complete all as specified and directed.

M&L for powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as speecified and directed. Note : (i) Weight of Aluminium sections as per actual or as per IS or as per Manufacturer which over is less, shall only be considered for payment. (ii) Cost of all the items/ accessories required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes and wirecloth shall be measured and paid separately under respective items. (iii) The accessories (Aluminium mongries etc) required to be provided for window, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered and no extra cost will be paid.

M&L for powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as speecified and directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. complete all as specified complete all as specified and directed.

M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of GE.

M&L for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement.Joints to be given at every 3m interval and corners of buildings and fitted with bituminious mastic or equivalent filler complete all as specified and directed.

M&L for pre polished cement concrete chequred tile with grey cement and no pigment of approved quality size 300X300X 25mm thick on floors over and including 20 mm thick screed bed cement mortar 1:6 set and jointed in neat cement slurry and pointed with colour to match the tiles complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in two layers 10mm +5mm in cement mortar 1:4 on external surfaces of brick work or concrete surfaces with using WPC finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- WPC will be measured and paid separately under respective item of this schedule.

M&L for preparing of old existing treament and stopping of distempered and painted surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over prepared surfaces complete all as specified and directed.

M&L for preparing of old existing treament and stopping of distempered and painted surfaces of wall and applying one coat of oli bound distemper (any tint) complete all as specified and directed.

M&L for preparation of new surfaces of wall with Chalk whiting, on plastered surfaces,prepara-tory to distempering with and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and directed

M&L for 5.5 mm thick sheet glass ordinary quality frosted on one side including glazing clips, rubber packing etc exc. 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel decorative curtain rod of 25mm bore complete all as specified and directed.

S&F finial fancy type for curtain rod in pair etc complete all as specified and as directed.

S&F bracket for curtain rod in pair etc complete all as specified and as directed.

M&L for providing and fixing PVC FALSE CEILING consisting of 600x600mm, 5mm (+0.25) thick plain ambossed PVC sheet of 600Kg/Cbm Density manufactured by ISO 9001-2008, certified company, used as panel insert in a frame work made using anodised aluminium T- section of sizes 1"x1" (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2'x2'(600x600mm). the aluminium frame work is supported from the ceiling with the help of "J" hook and GI wire/6mm MS rods of require sizes to maintain proper level etc. The aluminium framework is supported on side wall with the use of aluminium L-section of size 1"x1"(25x25mm) angles etc. complete as specified by manufacturer & drawing and directed by GE.

M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16Sqmm 04 core laid in trench/pole/on wall completer all as specified and directed.

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron earth strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

Supply and fixing LED flood light 200 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

Supply, laying and jointing double wall corrugated HDPE pipe 63mm outer dia as per IS 16205 with all necessary fittings complete all as specified and directed.

Supply, Errection, Installation, Commissioning & Testing of 16 Metre High Mast lightning System suitable for 08 Nos LED flood light symetrical. Material construction of high mast sheet shall be of BSEN 10025 / lS 5986 Gr Fe 510 or equivatent). Mast shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875 Part 3, three point suspention system. The foundation of the high mast shall be as per manufacturer drawing. The scope of work shall also be deemed to include of the followings:- (a) Galvanised Lantern carriage arrangement siutalbe for 8 luminaires symmetrically & its control gear boxs and lightning finial and with 03 point suspension system. (b) LED floodlight luminaire including all accesories, silicon filled driver IP-66 protection, driver must have BIS registered of cat part No LFLN-200-CDL/60M of CROMPTON or relevant cat No of other make of high mast as approved. (c) Double drum winch motor and manual method of operation tested load drum 500 Kgs. (d) Stainless steel wire rope 6 mm dia 7/19 construction conforming to AISI-316 grade. (e) The mast shall have an integral power tool 1.5 HP 1400 RPM single speed reversible 415 Volt, installed inside the base compartment for its operation. (f) 02 Nos LED type Aviation obstruction light. (g) Service Wiring feeder to flood light with multistranded copper conductor cable with double run for one standby cable. (h) Design, costing of suitable Design mix RCC foundation with Concrete grade for high mast considering SBC of soil as 10 T/Sqm (after cutting of concret & bituminus road and incl bolts manufactured from special steel along with nuts, washers, anchor plates and templates etc. and including PCC (1:2:4) for panel grounting, complete all as per manufacturer's instractions subject to approval of the GE.The design mix of concrete shall got done by the contractor from the approved lab at his cost and the cost shall deemed included in the quoted rates.

(j) Supply, installing, testing and commissioning, factory made and tested, LT feeder pillar box, outdoor type (CPRI approved) .The panel shall be dust and vermin proof, IP 65 class protection and made out of 3.15mm CRCA MS sheet and 40x40x4mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, double door openable type, with aprons for cable entry, internal wiring with PVC insulated, stranded copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 10 Sqmm. 02 Nos danger notice plate made of 1.6 mm thick mild steel sheet, vitreous enamelled white of size 25 x 20 cm with letters, figures and conventional skull bones in signal red colour shall be fixed to the pillar box with appropriate size nuts, bolts and washers etc indicating the voltage and danger in Hindi and English complete all as specified and directed. The following items/ accessories shall also be deemed to be incuded and accomdated in the above panel:- (i) Stag type,4 way terminal(I/P) 63 Amps - 01 No (PCB 150 ACBC) (ii) MCCB, 63 Amps, 4 pole, 25KA, 415V - 01No (iii) Contactor 3 pole, 63 Amps -01 No (iv) Toggle Switch 6 Amps - 01 No (v) Timer (analogue) (vi) Stag type, 4way terminal (O/P) 63 Amp - 01 No (PCB 150 ACBC) (vii) Over load relay 2/3.5A - 01 No (viii) Forward contactor 9A - 01No (ix) Reverse contactor 9A - 01No (x) Motor terminal 32Amps -01 No ((xi) Push switch terminal-01No (xii) Push switch (F/R) STD - 01 No.

Notes : - (aa) Work shall be executed as per standard engineering practice and as per manufacturers instructions. (ab) Before placing the order, the design/ drawing of high mast of the manufacturer shall be got approved from GE. (ac) The contractor shall get the work executed from the manufacturer or their authhorized rep. (ad) Size/type of RCC foundation Shall be carried out as per manufacturer's drawings subject to approval of GE. (ae) Unit rate inclusives of 16 mtrs. High Mast Tower suitable for 08 Luminaries, 16 mtrs. LED flood light luminaires, High Mast assecories, Mechanical Components including Head Frame & Pully Assay, Winch Bracket, Lantern Carriage Ring including control gear box Mtg arms for luminaires, Resting Bracket Guide Ring, Compensating Disc, Lightening Arrestor etc , Wire Rope , D Suckel clamps , Nuts and bolts , cable Foundation Accessories , Winch Assembly , Termination & distribution box, Power Tool, Feeder Pillar Box, Civil foundation with materials, excavation and erection, LED Aviation light (af) Any item missed out above but is technically required for safe and proper installation and operation of High Mast shall be deemed to be included in the quoted rate complete all as specified and directed.

Horizontal boring for laying up to 80mm bore of pipe using ultra sound technique/any other suitable mechanical means at approx 1 metre below the road pavement, hardstanding etc without damaging the existing surfaces getting out & disposal of soil to a distance not exceeding 50 metre from the site of work complete all as specified and directed.

S&F of wall panelling with high density fibre board slats of 16mm thick made of pine wood E1 gde fibre board, melamine/veneer laminated finish, groove perforated (2mm grooves), tongue groove edge for seamless look. The panels shall be mounted on special aluminium splines using clips provided by manufacturer and approved by GE

M&L for 18/19mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing fixed with screws to timber frame work complete all as specified and directed.

M&L for 75mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F 75 mm Butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F 75mm Extruded brass handles,fabricated type polished complete all as specified and directed.

M&L for IInd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered,put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

Supply, installation and testing of electric water heater storage vertical type, BEE 5 star rated, 25 ltr capacity 240 volts 50 Hz comprising of high wattage heating element of 2 KW for instant heating, extra Mild steel with Glass lined coated inner tank, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provn of 04 Nos grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/ flexible chord and one No 15 amps 3 pin plug top complete all as specified and as directed.

M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 6 Amp complete all as per specified and directed.

S&F Socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type complete all as per specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut easured) bore of pipe 15mm complete all as specified and directed.

S&F medium grade galvanized steel tubing (concealed) with all fittings & fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and directed.

S&F PVC connections pipe ,15mm dia size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Bib taps,15mm cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule or for CPVC pipes complete all as specified and directed.

S&F fancy type, chromium plated stop valve cast copper allow screw down high pressure with crutch or butterfly handle screwed both end form iron pipe or for union and fixed of size 15mm dia complete all as specified and directed.

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 73,450.00 (refer Tender Srl Page No 27). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

SRI A B SEN (BID ID -3320054)

UNIVERSAL CONSTRUCTION (BID ID -3321618)

MUKHERJEE ENTERPRISE (BID ID -3320846)

M/S UTTAM ENTERPRISES (BID ID -3320823)

M/S CONTRACTS (BID ID -3320859)