REPAIR/MAINT OF INTERNAL WIRING AND CONNECTED WORKS FOR

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling rose, pendent holder, sketch fitting, sockets, regulator etc and making good distrubed surfaces of walls and floors etc to match with the existing all as specifided and directed.

Taking down carefully submain wiring/ service connection of any type complete with casing caping / conduit etc complete all as specified and directed.

Taking down sheet metal enclosure, main switch, DB, etc and making good disturbed surfaces to match with existing surfaces.

M&L point wiring for one light point controlled by one switch with 1.5 Sqmm (nominal cross section area) PVC insulated unsheathed multistranded copper conduct cable in and including medium grade rigid PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3 mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core PVC insulated unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly and making good diturbed surfaces in cement motar 1:3 complete all as specified and directed.

,---ditto--- all as per srl item No 4 above, but for one ceiling/exhaust fan point controlled by one, one way switch and regulator complete all as specified and directed.

,---ditto--- all as per srl item No 4 above, but for one bell/buzzer point controlled by one bell push complete all as specified and directed.

,---ditto--- all as per srl item No 4 above but for one three pin 5 Amps socket outlet with 2 pin out let of 5 Amps on same board all as specified and directed.

,---ditto--- all as per srl item No 4 above but for one three pin 5 Amps socket outlet with 2 pin out let of 5 Amps on independent board all as specified and directed.

,---ditto--- all as per srl item No 4 above but controlled with two No. two way switches complete all as specified and as directed.

M&L point wiring for one light point controlled by one switch with 1.5 Sqmm (nominal cross section area) PVC insulated unsheathed multistranded copper conduct cable drawn in existing steel/PVC conduit/casing capping in existing sunken pressed steel terminal boxes, covered with and including 3 mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and 1.5 Sqmm single core PVC insulated unsheathed copper conductor wire as earth continuity to common earth and connecting to earth dolly and making good diturbed surfaces in cement motar 1:3 complete all as specified and directed.

,---ditto--- all as per srl item No 10 above but for one ceiling/exhaust fan point controlled by one, one way switch and regulatorcomplete all as specified & directed

,---ditto--- all as per srl item No 10 above, but for for bell point controlled by one bell push complete all as specified & directed

,---ditto--- all as per srl item No 10 above, but for 3 pin 5 Amp socket outlet on the same board with other switch, sockets complete all as specified and as directed.

,---ditto--- all as per srl item No 10 above, but for one 3 pin 5 Amp socket outlet on independent board complete all as specified & directed

,---ditto--- all as per srl item No 10 above but point wiring with 4 sqmm multi stranded conductor cable and 4.0 sqmm unsheathed copper conductor earth wire for two in one 6 pin 15 Amps socket outlet on independent board complete all as specified and directed.

Supply & fixing switch piano type flush button single pole one way 5/6 Amps, 230 volts all as specified & directed.

S & F in repair switch piano type flush button single pole one way 5/6 Amps, 230 volts inc taking down old one all as specified & directed .

Supply & fixing switch piano type flush button double pole two way 15 Amps, 230 volts inc taking down old one all as specified & directed.

Supply & fixing socket outlet 2 in 1, 3 pin 5 Amp,flush type inc taking down old one all as specified & directed.

M& L in repair socket outlet 2 in 1, 3 pin 5 Amp, flush type inc taking down old one all as specified & directed.

Supply & fixing bell push flush button 5/6 Amps, 230 volts all as specified & directed.

Supply & fixing switch piano type flush button single pole one way 15/16 Amps 230 volts all as specified & directed

M&L in repair switch piano type flush button single pole one way 15/16 Amps 230 volts all as specified & directed

Supply & fixing socket outlet two in one, 6 pin 5 Amp and 15 Amp flush type all as specified & directed

M & L in reapir socket outlet two in one, 6 pin 5 Amp and 15 Amp flush type all as specified & directed

S & F in repair sheet metal single pole and neutral enclosure 240 volts with a two pin and earth plug and socket complete with 20 Amp single pole MCB complete all as specified and as directed by Engr-in-charge.

S & F Lamp holder incl LED lamp 9 watt, insulated body with back plate etc all as specified and as directed.

Supply & fixing ceiling rose surface bakelite 65 mm x 50 mm size, 3 terminals complete all as specified and directed.

S & F fan regulator electronic socket type 80/100 watt all as specified and as directed by Engr-in-charge.

M & L in repair fan regulator electronic socket type 80/100 watt including taking down old one complete all as specified and as directed by Engr-in-charge.

Supply & fixing electric bell ding dong 230 volts AC supply all as specified and directed

Supply & fix in replair batton integrated LED light fitting 1x18/20 PVC composit type T-5 tube pre wired for LED tube fixed to roof/ceiling /wall with necessary wooden/PVC blocks etc and connecting with 2 core flexible PVC insulated multistranded copper conductor from ceiling rose to fitting complete all as specified and directed including taking down old one. make HPL cat Pt No HLPT51520/Polycab Cat Pt No LD00103017 or equivalent of /Bajaj/Crompton /Havells

Supply and fix in repair bulk head fitting with LED of 10 watt complete all as specified and as directed.

Supply and fix switch socket outlet 3 pin 5 amp' flush type all as specified and directed .

Supply and fix in repair Switch socket combination 2 in 1, 5 A flush type inc taking down old onecomplete all as specified and as directed.

Supply and fix in repair Switch socket combination 5A/16A, 5 in 1inc taking down old one complete all as specified and as directed.

Supply and fix in repair modular Socket, 6A - 2/3 pin combined 2 module inc taking down old one complete all as specified and as directed.

Supply and fix in repair modular Socket, 6A/16A - 2/3 pin combined 2 module inc taking down old one complete all as specified and as directed.

Supply and fix in repair modular Modular switch 1 way 6 A, 1 module inc taking down old one complete all as specified and as directed.

Supply and fix in repair modular Modular switch 1 way 16 A, 1 module inc taking down old one complete all as specified and as directed.

Supply and fix in repair modular Fan step regulator, 120W - 2 module inc taking down old one complete all as specified and as directed.

S & F in repair factory made sheet metal distribution boards, SPN, 12 way double door; protection class IP-30 suitable for mounting MCB/ conforming to IS- 8623 with 200 Amps rated copper bus bar suitable for working on 240 volts AC supply complete all as specified & directed.

S & F in repair factory made sheet metal distribution boards, SPN, 8 way; double door; protection class IP-30 suitable for mounting MCB/ MCCB, conforming to IS- 8623 with 200 Amps rated copper bus bar suitable for working on 240 volts AC supply complete all as specified & directed.

S & F in repair factory made sheet metal distribution boards, SPN, 4 way; double door, protection class IP-30 suitable for mounting MCB, conforming to IS- 8623 with 200 Amps rated copper bus bar suitable for working on 240 volts AC supply complete all as specified & directed.

S & F in repair factory made sheet metal distribution boards, double door TPN, 4 way; protection class IP-30 suitable for mounting MCB conforming to IS- 8623 with 63Amps rated copper bus bar suitable for working on 415 volts AC supply complete all as specified & directed.

S & F in repair MCB tripple pole 63 Amp, 415 Volts, rupturing capacity 9 KA confirm to IS- 8828-1996, IEC - 60898 complete all as specified and directed.

S & F in repair MCB SPN 63 Amp, 240 Volts, rupturing capacity 10 KA confirm to IS- 8828- 1996, IEC - 60898 complete all as specified & directed.

S & F in repair MCB SPN 32 Amp, 240 Volts, rupturing capacity 9 KA confirm to IS- 8828-1996, IEC - 60898 complete all as specified and directed

S & F in repair MCB SP 6 to 32 Amp, 240 Volts, rupturing capacity 9 KA confirm to IS- 8828- 1996, IEC - 60898 complete all as specified & directed.

S & F in repair MCB tripple pole & Nuetral 63 Amp, 415 Volts, rupturing capacity 9 KA complete all as specified and directed.

Sub main wiring with two single core PVC sheathed insulated cable of 6 sqmm size copper multi stranded conductor 1100 volts grade drawn-through and including 25 mm dia stove enamelled rigid steel conduit of adequate size of conduit and junction boxes,terminal boxs,terminal 6 sqmm copper conductor unsheathed multi stranded earth wire earth continuty conductor. (Two run of single core cable and one run of 4 sqmm copper wire earth continuty conductor and conduit with accessories shall be measured as one length) complete all as specified and directed.

Sub main wiring with Four single core PVC sheathed insulated cable of 10 sqmm size copper multi stranded conductor 1100 volts grade drawn-through and including 32 mm dia stove enamelled rigid steel conduit of adequate size of conduit and junction boxes,terminal boxs,terminal boxes and accessories such as tees, bend elbows, reducers, bell mouth tube ends fixed concealed in wall including one run of 6 sqmm copper conductor unsheathed multi stranded earth wire earth continuty conductor. (four run of 10 Sqmm single core cable and one run of 6 sqmm copper wire earth continuty conductor and conduit with accessories shall be measured as one length) complete all as specified and directed.

S & F 1100 volts grade heavy duty PVC insulated aluminium stranded conductor cable served with inner sheathing twin core flat or circular of size 10 sqmm in service connection & suspended by insulating hangers not more than 1 metre apart including 4 mm dia GI suspension wire all as specified & directed.

S & F LED building security light fitting 25 watt with epoxy powder coated sheet aluminium housing, with epoxy powder coated CRCA sheet steel grey tray, clear acrylic cover and accessories complete incl street light bracket made out of 25 mm dia GI medium grade pipe 0.6 mtr long complete with 2 sets of FI clamps made out of 30x5 MS flat & nuts, bolts & washer including painting to clamp with two coats of aluminium silver paint over a coat of primer after taking down old u/s one complete all as specified and directed

M&L for painting the sheet metal cabinetl of size 660 mm x 660 mm x 200 mm with two coat of synthatic enamelled paint over a coat of red oxide primer after repair to door hinges of cabinet including necessary welding and rearanging all elctrical connection in the box complete all as specified and as directed.

Supply and fixing MS sunken box 1.2 mm thick and min 60 mm deep including making good the disturbed surfaces with cement mortar as per existing sizes complete all as specified and directed.

Supply and fixing bakelite hylem sheet of size as per existing switch board and tightening with brass screw and cup washers complete all as specified and directed

S& F fresh air fan 230 mm sweep, plastic body single phase 230 volts 50 Hz including grouting with fasteners, nuts/bolts etc complete all as specified and directed

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

HARSH CONSTRUCTION CO.

AYUSH BUILDERS

Singla Electricals

Soma Enterprises

THAKURJI ENTERPRISES

SWARN SINGH AND CO.