REPAIR REPL OF ROOF TREATMENT FALSE CEILING BLOCK WALLING JOINERY PLUMBING SANITORY FITTINGS AND OTHER MISC WORKS AT OFFRs MD OTM ACCNS OF BEG AND CENTRE UNDER AGE BR II IN GE CENTRAL KIRKEE

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc fixed with L-type or J- type or cranked hook bolts complete.

As per item No 2 above but except AC sheet

M&L for Asbestos cement two- piece adjustable plain wing ridge 6mm thick fixed with L-type or J- type or cranked hook bolts complete.

Dismantling of single layer Mangalore pattern or similar tiles in roof coverings

S & F roof tiles, Mangalore pattern, inter locking at side joints laid dry

Ditto as per ser No 06 above except tiles

S & F ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM 1 : 6

Dismantling battens for tiles singles etc of any size including tiling fillets spaced exc 15 cm complete

S&F second class hard wood clean sawn battens at 30 cm centre to centre and section area exceeding 15 and not exceeding 25 sqcm

As per item No 10 but except battens complete

Taking down steel tubing and connection 15mm bore.

-Ditto.- but 20mm bore.

S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

S&F tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete.

Complete removal of existing treatment of wall and applying two coat of distemper oil emulsion(OBD) over a coat of primer on wall surfaces complete.

Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position.

S&F for 2nd class soft wood timber framed and fixed clean sawn in scantling all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth.

Dismantling of wall and ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete.

S&F interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc.

M&L for 8-9 mm thick Gypsum board/tiles for insulation and acoustic purposes, 60cmx60cm in size , fixed with nails to timber frame work or with staples on snap grid in ceiling.

Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed.

M & L for Granite slab machine cut for 20 mm thick bedded and jointed with colour cement to match cut to shape required all as specified and directed.

Ditto as per ser No 25 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including M&L for screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes. complete

Ditto as per ser No 27 but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

Dismantling cast iron (grill/gratings) work of any description

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces including all necessary preparation over 10 cms width or girth.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames metal frames or stone concrete or brick surrounds, glazing with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing fixed with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and completed.

S & F in repairs Sinks made of stainless steel 1 mm thick in kitchen with plugs, washers and wastes incl bedding in cement mortar on wall or incl fixing cantilever brackets and connecting union to pipes overall size 495 x 420 mm bowl size 410 mm x 330 x 160 mm all as specified

S&F PVC waste pipe for 40 mm dia

S&F PVC waste pipe for 32 mm dia

Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete

Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level all as specified.

M&L for vitrified ceramic tiles 10 mm thick light shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified.

M&L for Vitrified coloured tiles in vertical/skirting surface 10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar 1:6 complete.

M&L for Glazed ceramic coloured tiles in vertical surface 450 X300 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete

M&L for Glazed ceramic coloured tiles in vertical/skirting surface 300 X200X 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete

M&L for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete.

S & F in repairs Aluminium body, door closer hydraulically regulated designation N0. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for

Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate ) as in cover slabs for drains set in cement Mortar 1:4 and fixing in position incl necessary form work complete all as specified and directed

M&L TMT bars 6 to 8mm dia and over cut to length bend to shape required incl cranking, hooking ends and binding with and incl MS wire (annealed) not Less than 0.9 mm dia complete all as specified and directed

S & F in repairs wash down water closet (cascade pattern) Ivory coloured complete (Including flushing cistern upto 10 ltr capacity flush pipe ) and trap including plastic water closet seat cover (colour and pattern as approved) with flat bottom and cover with Stain less steel hinges. Chromium plated including connection to drain (or out going pipes) and flushing pipe, anti syphonage pipe etc complete all as spd and directed. Catlogue No- S1013103, Make- CERA

S & F in repair CP health faucet for EWC 15mm dia all as specified and directed by EIC

S&F for powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm , aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified

S & F in repair Wash Hand Basin vitreous China (Oval) size 550X400mm including bracket, 15mm Swan pillar tap, 15mm dia PVC connection 600mm long and waste pipe of 32mm dia all as specified and directed (Make of WHB : HINDWARE/CERA) waste coupling 32mm size Catlogue No- S2030103

S & F in repair Ivory colour wall hung Wash Hand Basin(Cat No.S2040113) with Pedestal (Cat No.S2090106) vitreous China size 580X440mm with and including waste coupling 32mm size, bracket, 15mm pillar tap, 15mm dia PVC connection 600mm long and waste pipe of 32mm dia all as specified and directed (Make of WHB and Pedestal : CERA) (Make of Pillar tap: Jaguar)

S & F in repair Vitreous China white colour urinal Bowl type including connection of flushing pipe and outgoing pipe.

S & F in repair Vitreous China Ivory colour urinal Half stall type (excluding flushing cistern, flush pipe and waste pipe).including connection of flushing pipe and outgoing pipe.

S & F in repair laminated flooring wooden shade-1440 on EPE foam with properly fix to the grooves given in the laminated sheets.

S & F in repair wooden battens for laminated flooring properly fix complete all as specified and directed.

Dismantling water tanks AC/PVC of any type and any position from site of capacity 500 litres complete all as specified and directed

Dismantling water tanks AC/PVC of any type and any position from site of capacity exc 500 litres n.exc 1000 ltrs complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Supply and fixed in repair provision of Ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20 mmdia of the pipe

Demolition of precast concrete block /brick work walling built in cement mortar

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed

M&L for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete

M&L for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete

M & L preparation of newly plastered surface and applying two coat of cement base paint on wall etc complete all as specified and directed

M & L for rendering 15mm thick on fair faces brick work /PCC block masonry or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete

M & L preparation of newly plastered surface and applying two coat of oil bound Distember over a coat of primer on wall etc complete all as specified and directed

S & F in repairs Soap dish brass CP fixed complete.

S & F in repair Chromium plated towel ring all as specified and directed

Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including all as specified and directed

Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each all as specified and directed

Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixindg in the frame at site as per specification & drawing.

S & F 35mm thick 2nd class HW glazed or skeleton shutter open rebated divided into square with plainchamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1

S&F for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth.

S&F 100 mm but hinges, medium weight,stainless steel.

S&F for aluminium handles 150 mm cast type anodised

S&F for aluminium anodised barrel tower bolt 200mm long of

S&F for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long

S&F flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in holdfasts.

M&L 40mm thick PCC type B1 (1:2:4) 20 mm graded stone agg in floor finished fair, even and smooth without using extra cement.

S & F in repair bib taps cast copper alloy with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore all as specified.

S & F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore.

S & F in repairs water closet (Squatt Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor.

S & F in repair CP brass shower rose 125 mm dia all as specified.

S & F in repairs 20 mm size gun - metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repairs for Vitreous China wash down water closet pan (EWC) (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to down or out going pipe and to flushing pipe and syphonage pipe etc. of approved quality complete.

S&F water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e. float valve, syphon, flushpipe,brackets all as specified and directed by Engr-in-Charge.

S & F in repairs vitreous china wash hand basin white flat back size 550x 400 excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP brass wastes coupling and other fittings all as specified.

S & F PVC connections 15 mm dia with brass nut on both ends and washers 450 mm long all as specified and directed.

S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ( Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia all as specified.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading all as directed by Engr - in - Charge.

Removing of old water proofing treatment and cleaning the surface of slab and clearing with wire brushes, removing dust, foreign material, rubbish off the site to a distance n.exc. 100m complete all as specified and directed

M&L for 10 mm thick rendering in cement mortar 1:3 on RCC roof slabs mixed with water proofing compound @ 3% mixed with by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engineer-in-Charge. Note : WPC shall be measured and paid separately.

M&L for water proofing treatment over RCC slab by applying oil based bituminous primer surface @0.25 Kg/sqm and laying 3mm thik APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.50 kg/ sqm , reinforced with with non-woven polyster reinforced matt weighing not less than 160 gms/sqm polyster core having soften point not less than 1500C, longitudinal tensile strength not less than 650 N/5cm, by torching method and applying a coat of solar reflective aluminium paint @ 0.15 Kg/Sqm on membrance surface including 24 hrs ponding test complete all as specified and as directed by the Engr-in Charge.complete all as specified and as directed by the Engr-in Charge.

Supply only integral water proofing compound

JP ENTERPRISES