REPAIR AND PAINTING ALL TYPE OF STEEL FURNITURE UNDER BSO NORTH MEERUT CANTT

Amount

Almirah large Steel :- FD-1031 (a) Taking down old damaged leg of almirah large steel and providing new leg of PBI Sheet 1mm thick of size 480 x 100 x 700mm made to shape including gas welding and painting two coats of synthetic enamel paint olive green paint over coat of primer rest all as shown on Drg and directed by Engr-in-Charge

(b) Replacement of UNSV shutter with new shutter made of 1mm thick MS sheet size as shown on Drg including Hinges mild steel light weight 75mm long (min 3 Nos of Each shutter) complete fixing only chromium plated handle with 3 way locking device having 125mm long grip and gas welding etc as specified (Note : Handle & 3 way lock device measured and paid separately).

(c) Re-setting of existing dislocated shelves of almirah large by providing with appropriate size of clamps nut and bolts to reset the shelves at their place rest all as shown on Drg and directed by Eng-in-Charge

Almirah Med Stee FD-350 / 1032 (a) Taking down old damaged leg of Almirah Med Steel and providing new leg of PBI sheet 1mm thick of size 450x100x700mm made to shape icluding gas welding and painting two coats of synthetic enamel paint olive green paint over coat of primer rest all as shown on Drg and directed by Enger-in-Charge

(b) Replacement of UNSV Shutter with new shutter made of 1mm thick MS Sheet size as shown on Drg including Hinges mild steel light weight 75mm long (min 3 Nos of Each shutter) Complete fixing only chromium plated handle with 3 way locking device having 125 mm long grip and gas welding etc a s specified (Note : Handle & 3 way device measured and paid separately)

Almirah large Steel :- FD-1031 (a) Taking down defective locking device and after doing necessary repairs providing check nut and washer if required for smooth functioning of the handle and brass lock three leavers (Make : Harison / Godrej/ Link) with duplicate key rest all as per directed by Engr-in-Charge

(b) Removing of old unserviceable CP Handles from almirah Large Steel / Almirah Med Steel and providing with CP Handle chromium plated (CP Handle best quality) as approved by GE (Make Harrison / Godrej / Link)

Table Office Officers Steel FD-1004 (a) Replacement of UNSV / Damage drawer from table with new drawer made of 1mm thick PBI sheet including painted with two coats of synthetic enamel olive green paint over a coat of red oxide and brass lock seven levers (Make : Harison / Godrej / link) with duplicate key rest all as per directed by Engr-in-Charge

(b) Replacement of unsv top with new top to be made out of a prelaminated MDF board 18mm thick exterior grade as per drg and edging around with 4mm thick wood beading complete as per drg rest as specified by Engr-in-Charge

Table Office Clerk steel :- FD-1003 (a) Replacement of unsv top with new top to be made out of a prelaminated MDF board 18mm thick exterior grade as per drg and edging around with 4mm thick wood beading complete as per deg rest as specified by Engr-in-Charge

(b) Replacement of UNSV / Damage drawer from table with new drawer made of 1mm thick PBI sheet including painted with two coats of synthetic enamel paints over a coat of red oxide and brass lock three leavers (Make : Harison / Godrej / Link) with duplicate key rest all as per directed by Engr-in-Charge.

Locker (Steel) :- FD-1029 (a) Replacement of UNSV / Broken leg with new leg made to shape out of 1mm MS Sheet as shown on Drg and incl painting with two coats of synthetic enamel paint (OG) complete all as specified and directed

(b) Replacement of UNSV Shutter with new shutter made of 1mm thick sheet size as shown on Drg, incl hinges of mild steel light weight 75mm long (Min 2 Nos of each shutter) chromium plated bow handle and gas welding painting the shutter, rest all as shown on Drg and directed by Eng-in-Charge

Almirah Med Steel :- FD-350/ 1032 (a) Replacement of UNSV CP handle from Almirah Med Steel with New CP Handle Chromium plated (Best Quality) as approved by GE.

(b) Taking down defective locking device and after doing necessary repairs provideing check nut and washer if required for smooth functioning of the handle and brass lock three leavers (Make : Harison / Godrej / Link) with duplicate key rest all as directed by Engineer-in-Charge

(c) Re-setting of existing dislocated shelves of Almirah Med steel by providing with appropriate size of clamps nut and bolts to reset the shelves at their place rest all as shown on Drg and directed by Engineer-in-Charge

Chair Varandah (a) M&L for painting of frame of chiar varandah with white synthetic enamel paint two coats with make approved by GE including preparation of surface after removing the cane and providing 04 Nos PVC shoes of black colour to legs of chair varandah complete all as specified and directed by Enger-in-Charge

(b) Removing of old unsv cane from holes and recanning the chairs etc with approved new plastic cane of 2mm wide and 0.4mm thick as per godrej pattern all as specified irest all as shown in drg and directed by Engineer-in-Charge

(c) M&L gas welding to frame of chair varandah and providing two stiffners at the seat including preparation of surfaces and removing the unwanted welding spots to give smooth surface complete all as specified and directed by Engr-in-Charge

Teapoy Varandah (a) Replacement of unsv top with new top to be made out of a prelaminated MDF board 18mm thick exterior grade as per drg and edging around with 4 mm thick wood beading completed as per drg rest as specified by Engr-in-Charge

(b) Replacement of old unsv frame with new frame out of angle iron size 20x20x3mm with legs 4 Nos 10mm dia MS bar made to shape along with centre support of size 25x3mm MS flat welded to angle iron frame as shown in drg welded to frame duly painted with paint synthetic enamel white over a coat of primer complete all as specified and directed

(c) Spray painting to steel frame of teapoy varandah externally after preparation of surface with paint synthetic enamel white primer shall be provided where welding has been done as well as new conduit MS is provided complete all as specified and directed

Painting to steel furniture (a) Painting to Almirah Large steel / Almirah large steel 1/2H, 1/2Sh will be applied two coats of synthetic enamel paint as approved by GE 1st calls paint out side of Almirah after removing dust and stains with sand paper and spray painting shall be done with standard workmanship by applying putty wherever required of surface over primer having same make of paint after approval of GE. Rest all as specified and directed by Enger-in-Charge

(b) Painting to Almirah Med Steel will be applied two coats of synthetic enamel paint as approved by GE. 1st Class paint out side of Almirah after removing dust and stains with sand paper and spray painting shall be done with standard workmanship by applying putty wherever required of surface over primer having same make of paint after approval of GE. Rest all as specified and directed by Enger-in-Charge

(c) Spray painting to steel frame of table office clerk steel externally after preparation of surface with two coats of synthetic enamel paint OG (primer shall be provided where welding has been done as well as new conduit MS is provideed) complete all as specified and directed by Engineer-in-Charge

(d) Spray painting to steel frame of table office officers steel externally after preparation of surface with two coats of synthetic enamel paint OG (primer shall be provided where welding has been done as well as new conduit MS is provideed) complete all as specified and directed by Engineer-in-Charge

(e) Painting to locker bed side steel will be applied two coats of synthetic enamel paint (1st class paint) out side of locker steel after removing dust and stains with sand paper and spray painting shall be done with standard workmanship by applying putty wherever required of surface over primer having same make of paint after approved of GE Rest all as specified and directed by Enger-in-Charge

Laxmi Furnitures & Engg

Garga Traders

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD