Tender for the work of providing and laying 230mm dia SW line linking to 300mm dia RCC pipeline with construction of new machine holes at LR Nagar I main road CS lane coming under Johnson Market Service Station of AEE SE-1 Sub Division

Tender for the work of providing and laying 230mm dia SW line linking to 300mm dia RCC pipeline with construction of new machine holes at LR Nagar I main road CS lane coming under Johnson Market Service Station of AEE SE-1 Sub Division

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3 in volume and stock piling at designated locations and disposal of dismantle...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm (Depth upto 1.50m not exceeding 1.5m in width ) trench width as per drawing and technical...

b) Depth exceeding 1.5 m, but not exceeding 3 m

Providing lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber ...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and constructing "WIRE CUT BRICK MACHINEHOLE CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved qu...

b) Above 1.0 mtr depth mh interms of 0.1 mtr additional depth( between 1.0 to 2.0 mtr depth)

Dismantling the damaged or collapsed Machinehole ,conical in shape, and reconstructing the same for the same dimensions, with machine made wire cut brick in CM 1:4 with ordinary portland cement etc. a...