Estimate for dismentalling of old gate, installation of new Gate and new Gearing arrangement with motorisation of HEAD- Regulator of GHUMMAN DISTY RD 267900/R (2 No. of Gate) of Kotla Branch

Project in-charge

Work Manager/Site Engineer

Engineering Graduate

Skilled employees

UnSkilled employees

Punjab Water Resources Department

SCHEDULE (C) (Summary of Experience of Agency/Contractor/L&C Society for similar nature of work)

Name of the Contractor / L&C Society

Name of the Work

Please fill information about the each relevant work completed during the last Five years for works Costing more than Rs._________________

Name of Employer

Punjab Water Resources Department

PRE-QUALIFACTION SCHEDULE (D) AFFIDAVIT

1. That I have submitted a bid for execution of work relating to"

in response to NIT issued by the

2. That all information given in the pre-qualification schedule forms and in the attachments are true and correct.

3. That the undersigned hereby authorize (s) and request (s) any bank/person/firm or corporation to furnish pertinent information required by the Deptt. deemed necessary regarding my (our) competence and general reputation

4. That the undersigned understands that if any further qualifying information shall be required I/We agree to furnish such information at the request of department/project/implementing agency.

Punjab Water Resources Department

SCHEDULE (E) ADDDITIONAL INFORMATION

Name of the Work

WATER RESOURCES DEPARTMENT, PUNJAB

MANSA DIVISION I.B. JAWAHARKE

Name of the work : Estimate for dismentalling of old gate & installation of new Gate and new Gearing arrangement with motorisation of HEAD- Regulator of GHUMMAN DISTY RD 267900/R (2 No. of Gate) of Kotla Branch

Name of Firm

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

SUPPLY OF BOLT WITH NUT AND WASHER AS PER REQMNT - IS-1364 LUMPSUM

SUPPLY OF CHEQUERED PLATE 6 MM - 1S-3502

SUPPLY OF CSK SCREW WITH NUT & WASHER - IS-1364 LUMPSUM

SUPPLY OF GI PIPE 50 NB - IS 1239

SUPPLY OF ISA 65 X 65 X 6 - IS-2062

SUPPLY OF J—ANCHOR BOLT 12/16/20 MM DIA - IS-1364

SUPPLY OF PLATE 10 MM - IS-2062

SUPPLY OF PLATE 12 MM SS - IS-1570 PART-V

SUPPLY OF PLATE 12 MM - IS-2062

SUPPLY OF PLATE 15 MM - IS-2062

SUPPLY OF PLATE 20 MM - IS-2062

SUPPLY OF PLATE 6 MM - IS-2062

SUPPLY OF PLATE 8 MM - IS 2062

SUPPLY OF PLATE 8 MM SS - IS- 1570 PORT-V

SUPPLY OF SHS 150 X 150 X6 - IS 4923

SUPPLY OF SHS 60X60 .L= 1000 - 1S4923

SUPPLY OF SHS40X40X2.6, L-1660 - IS4923

SUPPLY OF SIDE SEAL 44DIA - IS 11885

SUPPLY OF SQUARE BAR 25X25 - IS-2062

SUPPLY OF STRUCTURAL STEEL ISMC /ISMB/ISST - IS-2062

SUPPLY OF WEDGE TYPE BOTTOM SEAL 75X10 - IS 11885

Zigs and fixture, gas tools and plants, racking and haulage arrangements for replacing damaged and broken parts including carriage and other miscellaneous items complete in all respects to entire satisfaction of engineer-in-charge (Sr. No. 66 )

Supply of multipurpose synthetic Hetiv grease (Sr. No. 31 )

Supply of multi grade mobile oil. (Sr. No. 32 )

Scraping brushing to remove paint to base metal surface.

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades metallic surface to give an even shade.

Overhauling labour of gate mechanism and assembly including greasing, oiling and installation of mechanism complete in all aspects.

Commissioning and testing of gates at site complete in all respects and to entire satisfaction of engineer-in-charge.

Fillet welding with high strength steel rods, complete in all respects and to entire satisfaction of engineer-in-charge 6 mm wide

Fillet welding with high strength steel rods, complete in all respects and to entire satisfaction of engineer-in-charge 8 mm wide

Fillet welding with high strength steel rods, complete in all respects and to entire satisfaction of engineer-in-charge 10 mm wide

Fillet welding with high strength steel rods, complete in all respects and to entire satisfaction of engineer-in-charge 12 mm wide

Installation of GATE structure + embedded parts+gate leaf+ deck with the help of hydraulic mobile CRANE 35 TON CAPACITY( 12*3=36 Hrsx2=72)

Dismantling of spindle hoist, central drive unit, rope drum, rack and pinion and winch machine at site complete in all respects.

CI Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside for spindle including labour charge complete in all respects 1.5 Ton capacity

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 55-65 dia - 15 ft

Supply and Fixing of spindle cover

Supply and fixing of common shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge - 2.2 m per gate for motor

Fixing of coupling for Common Shaft with supply of spindle shaft coupling rods and cover complete in all respects.

Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. (ii) above 10 - 20 mm dia ( SUM OF ALL BOLTS, CSK SCREW QTY = 239*2)

SUPPLY OF SKIN PLATE

Dismentaling (embed-gate-superstructure )Gas Cutting of steel channels/beams/parts or Removing, damaged structural steel and stacking clear from working space by gas cutting complete in all respects and to entire satisfaction of engineer-in-charge (assuming 90 % weight of old gate same as new arrangement = 6065 kg )

Dismentaling of wire mesh covering - Gas Cutting of steel channels/beams/parts or Removing, damaged structural steel and stacking clear from working space by gas cutting complete in all respects and to entire satisfaction of engineer-in-charge (assuming 50 % damage in dismentaling the wire mesh and motorised assembly from current system= 50 % of (744 + 286 ) kg = 615 kg )

Overhauling dismantling of motor - mechanism already installed on gate safely and with minimum damage to the mechanism

Providing & Fixing of 10 gauge welded mesh of 25mm x 25mm size fixed on steel glazing with MS flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming Coat

Corrugated G.I. Sheet roofing 0.80 mm thick fixed with galvanized iron J or L hooks 10mm dia, G.I. Limpot and bitumen washers complete excluding the cost of purling rafters and trusses

Supply of ISA 50 X 50 X6 (Structural Steel) LINEAR DENSITY 4.47/M

Fillet welding with high strength steel rods complete in all repects and to entire satisfaction of engineer-in-charge

Providing and fixing Galvanized Nut and Bolts of all sizes & length required (LUMPSUM)

Paintng two coats with excluding priming coat with ready mix paint for mettalic surface in all shades on steel or iron work

Applying Priming Coats with metal primer on new steel or iron work i/c prepration of surface

Cutting and straightening charges complete in all repects and to entire satisfaction of engineer-in-charge

Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. (v) above 50 mm dia

Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. (ii) above 10 - 20 mm dia

Machining and Finishing of any part to desired shape and size , complete in all respects and to entire satisfaction of engineer incharge

Cutting and Straightening Charges complete in all respects and to entire satisfaction of engineer incharge

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of engineer incharge (ii) 8 mm wide

Providing and fixing galvanized nuts and bolts of all sizes and lengths required

Hiring charges of crane 35 tonne

Painting two or more coats excluding priming coat with synthetic enamel paint in all shadeson wood work, metallic or plastered, concrete surface to give an even shade.

Applying Priming Coat with Metal primer on New Steel or Iron work including preperation of surface ( with special quality paint )

Providing and fixing SS Nuts and bolts of all sizes and lengths required

Providing LED Light of standard reputed company with minimum 2 year warranty (20 watt)

Supply of ISMC 100

Supply of Plate 10 mm

Supply of Sheet 3.15 mm

Zigs and fixture, gas tools and plants, racking and haulage arrangements for replacing damaged and broken parts including carriage and other miscellaneous items complete in all respects to entire satisfaction of engineer-in-charge.

Mechanical coupling of Electric motor mechanism including reduction gear with existing gate mechanism complete in all aspects. (ii) Rack and pinion system

Removing ,Providing insatallation& fixing in position EM Brake (6.5 Kgm 150 MM dia) at site complete in all respects and to entire satisfaction of engineer-in-charge

Supply and installation of Three phase 2 HP motor set

Supply and Installation of Variable Frequency Drive -5HP for 220:2.2 Kw For 3HP Motor

Providing and assembling Manual shifting arrangement/jaw clutch assy with Hoist assembly for manual override

Overhauling of gate mechanism of all types including dismantling, greasing, oiling and re-installation of mechanism complete in all aspects.(Sr. No.69)

Supply and installation+ coupling of BEVEL GEARBOX

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1sq.mm (Un-sheathed)

Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

Overall size 6sq.mm (Un-sheathed)

Overall size 10 sq.mm (Un-sheathed)

Supply and erection of PVC insulated PVC sheathed FR (2Core) round flexible wire with copper conductor cable (ISI marked) confirm to IS:694/1990 left bare in pipe or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (48/0.20mm), 2Core

Overall size 2.5sq.mm (50/0.25mm), 2Core

Supply and erection of PVC insulated PVC sheathed (3 core) round flexible wire with copper conductor (FR) cable (ISI marked) confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 4.0sq.mm (84/0.3mm), 3Core

XLPE INSULATED ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

Overall size 10sq.mm (2Core) Armoured (Loose)

Overall size 25sq.mm (4Core) Armoured (Loose)

G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH):

Bonding to existing earth with 8 S.W.G. (4mm dia) G.I. wire fixed with stapples on wall.

SUPPLY AND ERECTION OF WIRING ACCESSORIES: Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc:-

Modular Motor Starter 25Amp. (Two Module)

BAKELITE SHEET: Supply and erection of brown bakelite sheet white glazed translucent backside painted 3mm thick (thickness not less than 3mm) on the existing metal box including cutting, fixing and connection of existing switches and sockets and other petty material etc.

MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 0.5-4amp. (10kA, CurveC)

MCB Double Pole 6-32amp. (10kA, Curve- C)

MCB Double Pole 50, 63amp. (10kA, Curve- C)

MCB Triple Pole 6-32amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

RCBO's: Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

RCBO Four Pole 16/25amp., Sensitivity 30mA

Supply and erection of heavy duty aluminium thimbles/lugs for cable end termination duly crimped including making necessary connections completely:-

Aluminium thimble cable Core size 4-6 sq.mm

Aluminium thimble cable Core size 25 - 35sq.mm

Supply and erection of heavy duty Copper thimbles/lugs for cable end termination duly crimped including making necessary connections etc. completely:-

Copper thimble cable Core size 25 - 35sq.mm

Nuts & Bolts of all sizes and length required

Providing, installation & fixing in position of Limit Switches 30 Amp capacity H.D. At site complete in all respects and to entire satisfaction of engineer-in-charge

Providing, installation & fixing in position of LC1D Contactor 32 Amp at site complete in all respects and to entire satisfaction of engineer-in-charge

Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:- TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto 125amp.)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (a) Heavy Gauge PVC Conduit Pipe 20mm dia. (On Surface)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (c) Heavy Gauge PVC Conduit Pipe 32mm dia.(On Surface)

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- (d) Heavy Gauge PVC Conduit Pipe 40mm dia. (On Surface) dia. (On Surface)

Painting of Galvanized iron pipe pole including bracket with two coats of aluminium paint (With brush):- (b) Overall Length 6.1 Metre

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (a) Painting of G.I. Pipe 15mm and Conduit Pipe 20mm dia.

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (c) Painting of G.I. Pipe 25mm and Conduit Pipe 32mm dia.

Painting of G.I./ Conduit pipes with two coats of approved paint (With brush) including cleaning the surface etc.:- (d) Painting of G.I. Pipe 32mm and Conduit Pipe 40mm dia.

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:- (a) PVC Flexible Pipe 20mm dia.

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- (i) Cable Tray Size 150mm x 50mm x 50mm (2mm thick)

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:- (ii) Cable Tray Size 300mm x 50mm x 50mm (2mm thick)

LAYING OF UNDER GROUND CABLES: Laying of under ground cable to be laid 1 metre below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc.