SPECIAL REPAIR TO ROAD AT B SECTOR PFFR UNDER STN HQ POKARAN

Amount

M&L for repair to pot holes of any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth and making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed by Engineer-in-Charge.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exceeding 50mm and not exceeding 100mm deep in area exc 400 sqm and removing all material complete all as specified and directed by Engineer-in-Charge.

M&L for laying and compacting 150mm thick (compacted thicness) WMM laid in two layers of 75mm each Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for road and bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete and the finish surface tolerances tobe as per Table 900-1 of MoRTH specifications for road and bridge works 2013 specification complete all as specified and directed by Engineer-in-Charge.

M&L for preparing of WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly tack coat of a hot paving bitumen of VG-10 grade @ 10 Kg/10 Sqm complete all as specified and directed by Engineer-in-Charge.

M&L for Premix bituminous macadam of paving bitumen of VG-30 grade with 4% binder content by weight of total mix, any penetration laid /rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) complete rolling to uniform smooth surface with 8 to 10 ton power road roller complete all as specified and directed by Engineer-in-Charge.

M&L for Bituminous premixed asphaltic semi-dense concrete 30mm thick (consolidated thickness) with 5.5% binder (Paving bituminous VG-30 Graded) content by weight of total mix including prepration of existing black top/ unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning and cleaning surface with gunny bags to remove all loose dirt etc and applying evenly a priming tack coat of bitumen VG-10 grade @ 2.5 Kg/10 Sqm by mechanical sprayer rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed by Engr-in-charge. Note :- Repair of road to be carried out in Patches.

M&L for marking 2.5 mm thick of 01 coat of painting lines, centre line, dashes, arrows, letters, zebra crossing, speed breakers etc on roads pavements and the like not exc 10 cm wide with road marking paint, white or golden yellow as per IRC pattern with thermo plastic paint of approved make and mix with 8% mica sign applicator machine, complete with traffic diversion arrangement complete all as specified and directed by Engineer-in-Charge.

M&L for providing 75 (compacted thickness) moorum / red bajri, spread, rolled and consolidated to gradient and camber required with power roller 8 to 12 Tonne required as in berms, footpath etc complete all as specified and directed by Engineer-in-Charge.

ABHOG INFRASTRUCTURE PRIVATE LIMITED (BID ID -3112571)

BHAWANI CONSTRUCTION COMPANY (BID ID -3131562)

M/S HARIOM CONSTRUCTION COMPANY (BID ID -3131705)