Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹2.4 LAccepted-AOC WARD NO 5 BIRSINGHPUR PALI DISTT UMARIA M P | BIRSINGHPUR PALI | UMARIA | MADHYA PRADESH | 484555 | L-1 | Accepted-AOC Rama Shankar Pandey is L1 BIDDER | |
| 2 | L-2₹2.1 L+₹8,726.36 (4.33%)Rejected-Finance WARD NO 2 MUNDI KHOLI DISTRICT UMARIA M P 484555 | MUNDI KHOLI | UMARIA | MADHYA PRADESH | 484555 | L-2 | Rejected-Finance Rama Shankar Pandey IS L-1 BIDDER | |
| 3 | L-3₹2.1 L+₹11,255.34 (5.58%)Rejected-Finance AT BONGA ITKHORI CHATRA | CHATRA | JHARKHAND | 825103 | L-3 | Rejected-Finance Rama Shankar Pandey IS L-1 BIDDER | |
| 4 | L-4₹2.1 L+₹11,905.73 (5.91%)Rejected-Finance BIRSINGHPUR PALI DISTT UMARIA MADHYA PRADESH 484551 | BIRSINGHPUR PALI | UMARIA | MADHYA PRADESH | 484551 | L-4 | Rejected-Finance Rama Shankar Pandey IS L-1 BIDDER | |
| 5 | L-5₹2.3 L+₹28,924.01 (14.3%)Rejected-Finance ADARSH NAGAR PO ORIENT COLLIERY BRAJRAJNAGAR JHARSUGUDA ODISHA 768233 | BRAJRAJNAGAR | JHARSUGUDA | ODISHA | 768233 | L-5 | Rejected-Finance Rama Shankar Pandey IS L-1 BIDDER |
Tender Value
₹4.3 L
EMD Value
₹5,400
Closing Date
1 Oct 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
STAFF OFFICER (CIVIL)
OFFICE OF THE STAFF OFFICER (C) SECL JOHILLA AREA NOWROZABAD DISTRICT UMARIA
Repair and maintenance of main Magazine at Birsinghpur of Pali Sub Area of Johilla Area
2022_SECL_256681_1
SECL/JHL/S.O.(C)/ eNIT-39/22-23/451 dtd. 17.09.22
Open Tender
Civil Works - Others
Item Rate
60 days
JOHILLA AREA
3 documents required · 3 mandatory
₹5,400
3 Nov 2022
19 Sept 2022
3 Oct 2022
20 Sept 2022
1 Oct 2022
20 Sept 2022
20 Sept 2022 - 27 Sept 2022
120 days
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.
Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treated hollock wood 30 mm thick shutters
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Kiln seasoned and chemically treated hollock wood
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378)100x10 mm
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378) 100 mm
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
Lettering with black Japan paint of approved brand and manufacture
White washing with lime to give an even shade :Old work (one or more coats)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 15 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore
Providing and fixing brass bib cock of approved quality :15 mm nominal bore
Providing and fixing brass stop cock of approved quality :15 mm nominal bore
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
Total impact of GST for the purpose of CTC
SANJAY KUMAR MALLICK
SUNIL KUMAR SINGH
K M SHARMA CONTRACTOR CIVIL AND SUPPLY
MANOJ KUMAR SINGH
MECH TECH ENGINEERING
Shri Bhupendra Singh
stage.html
html • 0.05 MB
techsummary_265393.pdf
PDF • 0.28 MB
finsummary_265393.pdf
PDF • 0.69 MB
LOA571.pdf
PDF • 2.96 MB
finance_265393.pdf
PDF • 0.25 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .