SPECIAL REPAIR TO BLDG NO P 2 (03 JCOS QTRS) AT SUKHJIT SINGH COMPLEX AND OTHER SANCTIONED WORKS UNDER GE (WEST) MATHURA

Amount

Excavation over areas not exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Excavation over areas exc 1.5m but not exc 3m deep and getting out in soft/loose soil complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for shafts, wells, cesspits, main holes, pier holes, laying of cable etc complete in hard/dense soil complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and exceeding 1.50 mtr not exceeding 3.00m depth for foundation etc or for shafts, wells, cesspits, main holes, pier holes, laying of cable etc complete in hard/dense soil complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.

Removing excavated soil not exc 50 mtr and deposited where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2, using 40mm graded stone aggregate in foundation , filing and mass concrete complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation of poles, filling & mass concrete complete all as specified and directed by Engineer-in-charge .

Taking down chowkhats with shutter (without taking off shutters from the frame) area not exc. 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.

S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F Pressed steel frame for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

M&L for cement concrete type C-1, (1:3:6) using 20mm graded aggregate as in bed block or filling of chowkhats including necessary form work complete all as specified and directed.

S&F 35 mm thick factory made plain framed, panelled shutter (any number of panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood (Hollock or Bonsum) complete all as specified and directed by Engineer-in-charge.

S&F 35mm thick factory made glazed and skeleton shutters made of second class hard wood (Bonsum/Hollock), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Part I Section 8 Clause 8.24 (a) kiln seasoned and chemically pressure treated fixed to chowkat complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified & shown in relevant drawing of item No. 08095 in MES Schedule (Part-II) and directed by Engineer-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed.

S&F 150mm long stainless steel handles, oval type complete all as specified and directed.

S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F stainless steel butt hinges 100mm complete all as specified and directed.

S&F 200mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, cooler stand 12mm sq guard bar, framework of water tanks and similar works of quality Fe 290 (Gde E-165) etc complete all as specified and directed by Engineer-in-charge.

S&F 70-80mm thick factory made precast RCC manhole / drain covers including frame made up of 40x40x6mm angle, of any size & shape (Squre /rectangular /circuler), heavy duty, out side, fixed at site etc complete all as specified and as directed.

M&L for salt glazed stone ware drain pipe 150mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.

M&L for salt glazed stone ware drain pipe 200mm grade 'A' laid in trenches and jointed in CM (1:1) complete all as specified and directed.

M&L cement concrete 1:3:6 mix type C2 (using 40mm graded stone aggregate) as in bed to drain pipe including packing under and hunching against the sides of pipes after laying in trenches to required slope and tested complete all as specified for 150 mm bore pipe complete all as specified and directed by Engineer-in-Charge.

All as per Item No 28.00 above but for 200 mm bore pipe.

M&L for Construction of soakage wells of size 2.4M dia x 3.0M deep including excavation in any type of soil complete all as specified and shown on drawings. Note :- (i) Effective depth should be measured from inlet of pipe. (ii) HQ CEJZ Drawing No TD/2004/S-35 Sheet 1/1.)

M&L for cement concrete (1:3:6) type C-1, using 20 mm graded stone aggregate as in surface channels or drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitered/stopped end etc. complete all as specified and directed.

S&F 100mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears fixed with cement joints, laid in trenches or in floor complete all as specified & directed by Engineer-in-charge. Note :- Cost of Excavation & earthwork, if required is deemed to included to in the unit rate of this items nothing extra shall be paid on this account.

S & F for cast iron vent cowl for 100 mm dia pipe complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge.

S&F in repairs for stainless steel 25mm dia as in curtain rod including brackets and side holders complete all as specified and as directed.

S&F 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off premises complete all as specified and directed.

M&L for non skid joint free ceramic white coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar (1:6) complete all as specified and directed by Engineer-in-charge.

M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering in cement & sand mortar (1:4) complete all as specified and directed by Engineer-in-charge.

M&L for Non skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles exc0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Coloured Glazed ceramic tiles in vertical surface 450x300x7 mm with highlighter thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B1 using 20mm graded crushed stone aggregate as in flooring finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded, jointed and pointed in any mortar complete all as specified and directed by Engineer-in-charge.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm screed bedding in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for machine cut Kota stone slab flooring 20 to 25mm thick (minimum size 550mm x 550mm or size as directed) laid over & including screed bed or bedding layer of 20mm thick in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-charge.

M&L for machine cut Kota stone slab 18 to 20mm thick (minimum size 550mm x 100mm or size as directed), on vertical surfaces such as dado, skirting, raiser of steps etc. laid over & including rendering 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, grinding, rubbing and polishing complete all as specified and directed by Engineer-in-charge.

M&L 50mm thick red sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep for fixing joist, angle, channel section and sand stone slab in chajjas upto G+2 floor and finishin face of groove with cement mortar 1:3 complete all as specified and directed by Engineer-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-charge.

M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 including water proofing compound on fair face of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and directed.

Supply Integral water proofing compound complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:4) as on ceiling complete all as specified and directed.

M&L for applying rust remover @ 5-6 Sqm/ ltr, after cleaning to remove loose rust/scales/corrosion from reinforcement bars having specific Gravity 1.2-1.22. The material to be applied to the rusted metal using brush, allow it to react for 16-24 hrs & afterwards wire brushing the surface, clean with dry cloth before application of protective coating etc complete all as specified and directedby Engineer-in-Charge.

M&L for fixing welded MS wire mesh weighing not less than 1 Kg/Sqm in soffit of slab and applying using mucis protezion ferro mono primer and anticorrosive primer uncovered steel and concrete surface chemical (Single component, cementitious corrosion inhibiting primer) on uncovered steel reinforcement and wire mesh having mixed density of 2.01-02.05, adhesive on bond strength- 1 N/mm touch drying time of 10-15 minutes and applying 20 mm thick cement mortar (1:4) with using integral water proofing liquid admixture for concrete mortar and integral water proofing compound for cement based concrete and mortar chemical 100/L 1.1-1.2 gm/cc, Cont/-

Cont/- chloride content nil as per IS 2645-2003 & using acrylic polymer base bonding agent and acrylic emulsion modifier and water based concrete bonding agent chemical STD having specific gravity of 1.02) in ratio as per recommendation of manufacture total chemical not less than 8 % by weight and providing single component polymer modifier using single component thixopropic fibre reinforced polymer modified repair mortar (1:1:4) to achieve compressive strength of 15 N/mm in 1 Day, 25 N/mm in 3 days, adhesion bond strength of > 2 N/mm complete all as specified and directed by Engineer-in-Charge.

Cont/- Unrestrained expansion upto 4% pressure to restrain plastic Expansion -Approx. 0.004 N/Sqmm , before pouring it is recommended to apply granolithic E-Resin based solvent free concrete bonding agent/EP in accurate proportion with complete homogenesity.Cementitious micro concrete having mix density of 1.45 to 1.5 Kg/litre, Compressive strength(BS 6319 Part-2)-40 Mpa at 7 days, Flextural strength (BS 6319 Part-3)-25 Mpa at 7 days, Tensile strength (BS 6319 Part-7)-15Mpa at 7 days, Bond strength(ASTM C 881)-11 N/sqmm at 7 days, having an over lay time of 03 hrs at 30 C. pouring of using suitable arrangement as required using pumping device for uniform flow of ensuring proper bond between the metallic aggregates (Mixed density @27OC) Approx. 0.004N/mm2. 10 - 12 x 10-6 / OC.1.5 W/mOC2200 - 2300 K and existing concrete substrate etc. complete including all tools and tackles complete as all specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of primer and a coat of wall putty to achieve smooth finish complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of exterior weather coat and primer on walls complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper over a coat of 1mm thick wall putty on wall etc complete all as specified and directed.

M&L for preparation of old decorated, plastered or pointed surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots etc and applying one coat of white wash complete all as specified & directed by Engineer-in-Charge.

M&L for complete removal and preparation of old painted surfaces of wall and applying two coat of exterior emulsion paint over a coat of primer complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore pipe complete all as specified and as directed.

Taking up or down steel tubing and connections of 20 mm bore pipe complete all as specified and as directed.

M&L for 15 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L for 20 mm nominal bore Mild steel galvanised water tubing, medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors including taking down old unserviceable PVC pipe and fittings complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors including taking down old unserviceable PVC pipe and fittings complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with solvent joints laid In trenches or in floors complete all as specified and directed.

S&F PVC (SWR) branch pieces single /double (equal or unequal) ordinary or inverted with parallel branches 110mm bore complete all as specified and directed.

S&F PVC (SWR) branch pieces single /double (equal or unequal) ordinary or inverted with parallel branches 75mm bore complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius with oval access door complete all as specified and as directed.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F 110mm PVC (SWR) vent cowl complete all as specified and as directed.

S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) FE-290 GD-165 including distance pieces, cleats etc. Complete all as specified & directed.

S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel ridges suitable for corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for bands, straps, supports or stays for rainwater , Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and lintle hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F in repair for swiveling shower 15 mm with shower arm 195 mm long of CP of size 100 mm any colour and fixed complete all as specified and directed.

S&F in repair 15mm dia stop cock cast copper alloy, fancy type with, chromium plated long shank and cup (concealed type) with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge.

S&F in repair 15 mm bore bib tap, cast copper alloy, chromium plated, long body, fancy type screwed down and screwed for iron pipe or for brass ferrule complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore CP pillar taps, swan neck, fancy type, cast copper alloy (minimum weight 350 gm) along screwed down high pressure with lettered hot & cold with long screwed shanks and fly nuts screwed for GI pipe complete all as specified and directed.

S&F in repair CP angle cock fancy type chromium plated 15 mm bore screwed down, high pressure screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repair Glass shelf 450mm long x 100 mm wide including brackets fixed to wall with sleeves and screws complete all as specified and directed.

S&F in repair corner glass shelf of size 300X300 mm including brackets fixed to wall with pvc sleeves and stainless steel screw complete all as specified and directed.

S&F in repairs towel rail chromium plated 20mm dia ‘D’ type, 600mm long complete all as specified and directed by Eng-in-charge.

S&F in repairs chromium plated Soap dish holder including chromium plated brass screws and plastic cleats complete all as specified & directed by Engineer-in-Charge.

S&F in repair Stainless steel gratings 100mm bore size fixed with white cement complete all as specified and directed.

S&F hard drawn steel wire fabric wt n exc 4 Kg/sqm cut to langth,bent to shape required and tying with and incl mild steel wire (annealed) not less than 0.9 mm in dia complete all as specified and directed.

M&L for 25mm thick (measured solid) precast cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate) louvers and jallies, including all mouldings but excluding frame, set in CM (1:4) complete all as specified and directed by Engineer-in-Charge.

S&F 18mm thick Hybrid water proofing board in cupboard shutter/kitchen cabinet with decorative on one side & other side balancing white fixed with necessary stainlesssteel drilling screws/Anchoring bolt along with modular handles, design and colour as approved by GE complete all as specified and directed.

S&F continuous piano hinges mild steel bright finish or electrogalvanised of 30mm flap width complete all as specified and directed by Engineer-in-charge.

S&F magnetic catcher of size 20mm x 50mm suitable for kitchen cabinet shutters/cupboard complete all as specified and directed.

S&F 100mm long stainless steel handles, oval type complete all as specified and directed.

S & F rotational moulded polyethylene water storage tank 750 Ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with all necessary GI fittings complete all as specified in SSR Pt I including taking down old unserviceable water tank & ball valve complete all as specified and directed by Eng-in-charge.

S&F Ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe 20mm bore or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S & F in 20mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back, size 550 X 400mm including waste pipe and brackets but excluding tapes, chain and plug etc complete all as specified and directed by Eng-in-charge.

S&F in repair stainless steel kitchen sink 1 mm thick with drainage board kitchen/laboratories with plug washer and waste including bedding in cement mortar and fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in replacement stainless steel kitchen plate rack overall size 900mm X 900mm made out of 0.8 mm thick stainless steel sheet etc complete all as specified and directed.

S&F for repair 32mm waste fittings, brass, chromium plated for glazed ware wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified

S&F for repair 40mm waste fittings, brass, chromium plated for glazed ware wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

M&L for cutting chases, pining in, making good to facing where required and pointed in CM (1:3) for concealed steel water tubing & like and making good, match with existing surfaces by applying white wash/colour wash cutting not exc 10cm girth complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, coping, parapets and railing upto 60cm height, copings bed block,roof kerbs or mud stops, kerb stone, kneelers, apex stones, bed plates, surface channels and drains, benching, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L for providing precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar (1:4) complete all as specified and directed.

M &L Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors/roof, and cut incl 20 mm screed bedding layer in CM 1:4 complete.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete (nominal mix) (1:2:4) type B1, using 20mm graded stone aggregate for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and other similar works complete all as specified and directed and directed.

M&L for reinforced cement concrete (nominal mix) (1:2:4) type B1, using 20mm graded stone aggregate as in chajjas etc complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of flat surface complete all as specified and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls , horizontal or sloping and similar work exceeding 10cm wide but not exceeding 20cm wide, surface flat for rough finished surface of concrete complete all as specified and directed by Engineer-in-Charge.

Demolition of cement (un-reinforced) concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in plinth protection, finished fair and even complete all as specified and directed by Engineer-in-charge. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B. Cost of ceiling compund is included in the unit rate of this item.

M&L for 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for sand filling under floors or in foundation complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

Warnout of existing treatment from sunken portion of WC /Bath /Kitchen / Passage including taking downfloor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk. (Taking down of plumbing & sanitary fitting & fixture shall be measured under relevant items).

Dismantling brick/concrete tiles any size etc including existing roof treatment of any thickness complete all as specified and directed.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) including removing the demolished material to a distance exc 250m but n. exc 500m and deposited where directed at a level n.exe 1.5m above starting point complete all as specified and directed.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof:- (a) Cleaning plastered roof surfaces and applying a coat of Oxidised bitumen based solvented primer @0.3 Kg/Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric waterproofing membrane 3mm thick with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be seated by flame complete all as per manufacture instructions and as directed.

M&L for Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken part of slab complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note:- Liquid WPC shall be measured and paid saperately.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F powder coated Anodised aluminium window and ventilator shutters side hung type without sash, aluminium sections weighing 0.55 kg/ m including necessary joining cleats, glazing clips rubber packing, anodised aluminium snap beading screws Anodise aluminium fitting such as peg stays 150 mm long (1 No), including pag stay and hinges type B-21 100 mm long (2 No) and suitable handle (1 No) complete all as specified and directed.

S&F Sheet glass 4 mm thick in glazing to aluminium door, window & partition including pad, gasket complete all as specified and directed.

S & F powder coated aluminium sliding window three track with frame & two glass shutters using 4 mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31 mm nominal dia of wire and width of aperture 1.61 mm using aluminium powder coated section aluminium cleat ,PVC track ,bearing, handle lock,rubber beading etc complete fittings as approved. Note:- Size of aluminium section shall be under- (i) Three track top and vertical - Jindal main-2010 section No 20621 or equivalent as approved by GE. (ii) Three track bottom - Jindal main - 2010 section No 20620 or equivalent as approved by GE. (iii) Shutter vertical section -Jindal main -2010 section 20604 or equivalent as approved by GE . (iv)Shutter top and bottom - Jindal main -2010 Section 20604 or equivalent as approved by GE. (v)Shutter vertical middle (interlock) - Jindal Main -2010 Section 20605 or equivalent as approved by GE.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Taking down surface / concealed copper / aluminium point wiring (light, bell, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, lamp holders, pendants, sockets, regulators, tubelight fittings, bulb, etc and making good disturbed surfaces with plaster on walls, floors etc complete all as specified and directed.

M&L for Point wiring complete with 2.5 sqmm single core FRLSH PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 2.5 sqmm multi stranded FRLSH, PVC insulaedcopper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.

M&L for Point wiring complete with 4 sqmm single core FRLSH PVC insulated cable with multi stranded copper condutor in and including PVC conduit 20mm dia and thickness not less than 1.5mm, ISI marked with all accessories for surface or concealed conduit as directed at site incl chase cutting for one light/fan point controlled by one one way switch including MS sheet sunken box concealed on wall duly painted inside and outside with one coat of red oxide primer and two coats of black bituminous paint with 3mm thick hylum brand bakelite sheet cover for fixing switches, sockets, regulators etc. alongwith 4 sqmm multi stranded FRLSH, PVC insulaedcopper cable as continuous earth connected to common earth and earth dolly including making good the disturbed surfaces complete all as specified and as directed.

M&L for point wiring with 4.0 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.60mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 4.00 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed.

All as per Sl item No 148.00 above herein before for light point controlled by two way switch complete all as specified and directed.

All as per Sl item No 148.00 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.

All as per Sl item No 148.00 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and in existing surface / recessed PVC conduit and connecting incoming / outgoing electric connections and one run of 6 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable as earth conductor including taking down old unserviceable submain wiring and making good disturbed surfaces complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length.

S&F socket out let, 3/6 pin suitable for 15 Amp plug top multipurpose 230 volt complete all as specified and directed.

S&F socket outlet flush type 5 pin suitable for 5 Amp 230 Volts all as specified and directed.

S&F switch Piano flush type 5 amp single pole one way 230 volts all as specified & directed.

S&F switch Piano flush type 15 amp single pole one way 230 volts all as specified & directed.

S&F ceiling rose of 65x50mm PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed.

S & F Switch Bell push 5 amp single Pole 230 V all as specified & directed.

S & F Bell ding dong type, AC 230 volts all as specified and directed.

S&F lamp holder insulated body with back plate batten/angle type for batten fittings complete all as specified and directed.

S&F LED bulb base B22 of capacity 10 watts not less than 700 lumens output at 6500K colour temp, complete all as specified and directed.

S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed.

S&F in replacement 10W decorative LED mirror light environment friendly, ultra modern, energy saving, surface mounted decorative with LED light, complete all as specified and directed.

Supply & fixing in replacement LED light fitting 20 W batten for Retro LED Energy saving tube light , high efficiency PMMA diffuser gives soft glare free light environmental friendly, energy efficient ready to use pack all as specified and directed.

S & F electronic ceiling fan regulator 5 stepped type heavy duty suitable to work on 230 volts complete all as specified.

Supply & fixing in replacement of MCB single pole 240 volt any rating from 6 to 32 amps, C series with rupturing capacity 10 KA complete all as specified and directed.

Supply & fixing in replacement of MCB Single Pole Neutral 240 volt any rating from 6 to 32 amps, C series with rupturing capacity 10 KA complete all as specified and directed.

Supply & fixing in replacement sheet metal enclosure MCB distribution board Single Pole & Neutral 240 volts 8 way with 200 Amp rated bus bar double door with isolated Neutral bar & shrounded bus bar IP-43 having door earthing complete all as specified and directed.

S & F in replacement of worn out MCB DB VTPN with sheet metal enclosure MCB DB VTPN 4 way with 200 amps rated bus bar 415 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

S&F in repairs MCCB, 100 Amp, 4 Pole, 16 KA, adjustable thermal & fixed magnetic setting complete all as specified and as directed.

S&F in repair MCB SPN 240 volts, 40-63 Amps, 10KA, 'C' Curve complete all as specified and directed.

Supply and fixing in replacement BLDC ceiling fans, 5 star rated by Bureau of energy with service value of not less than 8.40, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply complete all as specified and directed. Note : Old unserviceable ceiling fans deposited to E/M (West) store yard

Supply and fixing Exhaust fan metallic body of size 300 mm sweep, 50 Hz, AC 240Volt, 900 RPM, dynamically balanced impellers for smooth & vibration free operation, pre-lubricated double ball bearing for maintenance free running with aerodynamically designed & balanced blade, air delivery 1275 Cum/hr, noise level 40dB- 45dB and power consumption (50 W±10%) heavy duty single phase supply including mild steel louvers all as specified and directed. Note : Old unserviceable exhaust fans deposited to E/M (West) store yard.

Supply, installation, testing & commissioning in replacement of electric storage water heater of 25 litre capacity, rated voltage -230 VAC, single phase, 50 Hz of rated power input-2000 Watt conforming to IS 2082 with standing loss ≤ 0.511 & ≥ 0.465 KWh/24Hr/45°C (4 Star BEE rating wef 01 Jan 2023) having feroglas dry powder coating in water stoarge tank of ultra thick super cold rolled steel plates of high-strength, sock - proof ABS body using IPX4 technology to protect electrical parts from water splash whirlflow technology to avoid direct contact between cold and hot water flow, glass coated incoloy heating element for good corrosion resistance with execllent resistance to both oxidation and carbonization, feather touch panel for temperature setting between 25°C to 75°C to control energy consumption, digital display with 3 preset controls for easy operation, energy saving high density thick PUF insulation for better heat Cont/-

Cont/- retension, having sacrificial magnesium anode rod with steel core to protect water tank from rust and corrosion to enhance the tank life, having safety feature like thermostate, thermal cut off, multifunction valve, shock-safe plug to prevent electric shocks by cutting off the power in case of current leakage suitable for high-rise buildings of 8 bar (0.8 Mpa) pressure including fixing & connecting accessories like mild steel anchor fastener of size 10 x 100mm with nuts and washers, drilling/,aking hole on wall with provision of stainless steel breaded (SS 304 Graded) connection pipe (01 Pair) in 600 mm long for hot & cold water circulation with nuts and washers and testing thereafter complete in all respect complete all as specified and and directed. Note : Note : Old unserviceable water heater deposited to E/M (West) store yard

Supply, installation, testing & commissioning of electric storage water heater of 25 litre capacity, rated voltage -230 VAC, single phase, 50 Hz of rated power input-2000 Watt conforming to IS 2082 with standing loss ≤ 0.511 & ≥ 0.465 KWh/24Hr/45°C (4 Star BEE rating wef 01 Jan 2023) having feroglas dry powder coating in water stoarge tank of ultra thick super cold rolled steel plates of high-strength, sock - proof ABS body using IPX4 technology to protect electrical parts from water splash whirlflow technology to avoid direct contact between cold and hot water flow, glass coated incoloy heating element for good corrosion resistance with execllent resistance to both oxidation and carbonization, feather touch panel for temperature setting between 25°C to 75°C to control energy consumption, digital display with 3 preset controls for easy operation, energy saving high density thick PUF insulation for better heat Cont/-

Cont/- retension, having sacrificial magnesium anode rod with steel core to protect water tank from rust and corrosion to enhance the tank life, having safety feature like thermostate, thermal cut off, multifunction valve, shock-safe plug to prevent electric shocks by cutting off the power in case of current leakage suitable for high-rise buildings of 8 bar (0.8 Mpa) pressure including fixing & connecting accessories like mild steel anchor fastener of size 10 x 100mm with nuts and washers, drilling/,aking hole on wall with provision of stainless steel breaded (SS 304 Graded) connection pipe (01 Pair) in 600 mm long for hot & cold water circulation with nuts and washers and testing thereafter complete in all respect complete all as specified and and directed.

M&L for Cutting existing steel tubing and taking up for tapping/termination of pipe line, screwing existng steel tubing of size 15mm dia, complete all as specified and directed.

S&F in replacement Security Light of 30 watts of New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover and accessories including brakcet, nut bolt etc complete all as specified and directed.

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 16 sq mm 4 core confirming to IS-7098 (Part-I-1988) laid through wall / floors / on panels etc including taking down old unserviceable cable complete all as specified and directed by Engineer-in-charge.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work,disposal of suplus spoil to a dstance not exceeding 50mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete including taking down old unserviceable earthing all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

Supply & fixing MCB single pole 240 volt any rating from 6 to 32 amps, C series with rupturing capacity 10 KA complete all as specified and directed.

S&F sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of cap 10/20 A, C series complete all as specified and directed.

S&F 15mm dia stop cock cast copper alloy, fancy type with, chromium plated long shank and cup (concealed type) with crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed by Engineer-in-charge.

S&F 15mm bore chromium plated bib tap long shanks cast copper alloy fancy type (min weight 350 gm) screwed down, screwed for iron pipe or for brass ferrule and fix complete all as specified and directed.

Deepak Saxena (BID ID -3086259)

VANI CONSTRUCTION (BID ID -3086844)

KASHI NATH BANWARI LAL (BID ID -3087760)

ARCHI ENGINEERS (BID ID -3100869)

R N AGRAWAL (BID ID -3100253)