REPAIR TO DRAIN PATH CULVERT HARDSTANDING FENCING AND OTHER MISC WKS IN DEPOT AND ADM AREA AT 15 FAD JINDRAH UNDER GE ARMY DHAR ROAD

Amount

Demolition of cement concrete (unreinforced) in ground floor, paving not exc. 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stoneswork and precast concrete articles complete all as specified and directed

M & L for cement concrete 1: 4 :8 type D 2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L brick work with sub class 'B' bricks, straight or curved on plan exc. 6 mtr mean radius built in cement mortar 1:6 but (except bricks) complete all as specified and directed.

M&L Providing Cement concrete 1 : 2 : 4 Type B1 (20mm graded aggregate) as in roof kerbs or mud stops,in lintels upto 1.5 m span, copings slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M & L for cement concrete 1:3:6 type C2 using 40 mm graded aggregate as in surface channels and drains complete all as specified and directed

M & L for providing precast cement concrete type B1, 1 : 2 : 4 (20 mm graded aggregate) as in landing, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 including demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors), beams, staircase, landing, chajjas and similar suspended work not exc 15 cm thick complete all as specified including necessary form wok and as sprcified and directed.

M & L mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 etc complete all as specified and directed.

M & L for walling of random rubble stone masonary uncoursed well bonded , bedded and solidely hearted built in cement mortor 1:4 except stone etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses. Hammer dressing witrh maximum depression on face from straight edge held against the dressed surface not exc 20 mm in lime or sand stone complete all as specified and directed

M & L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including racking out joints , hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces (using WPC @ 3% of wt of cement) finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid under respective item.

Supply only integral water proofing compound complete all as specified and directed.

75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair, complete all as specified and directed.

M&L for 25mm thick sand filling under floors or in foundations including watering and consolidation as cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

M & L for machine pressed precast concrete with grey cement and pigment interlocking paver block (coloured red/yellow) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade complete all as specified and directed.

M&L for machine pressed cement concrete chequered tiles of size 300x300x25mm (coloured red/yellow), jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills including 20mm thick CM in 1:6 complete all as specified and directed.

M & L for preparation of new plastered surface of walls, priming plastered and other surfaces with a coat of alkali resistant priming paint and applying two coats of cement base paint white or tinted compelete all as specified and directed

M & L for 100 mm thick PCC 1:2:4 type B 1 using 20 mm graded aggregate as in flooring, including finishing surface even and smooth without using extra cement in alternate bays and aluminium dividing strips as in joints premixed non-metallic powder floor hardener @5 Kg / Sqm as in floor complete all as specified and directed (aluminium dividing strip to be measured and paid seperately)

M&L aluminium dividing strips of width 38mm, 1.5mm thick, inserted in position conform to design complete all as specified and directed

Dismantling fencing wire mesh/ line wire any dia any type

Dismantling posts or struts (wood, steel or R.C.C.) any section from natural ground, including taking out embedded portion and making good disturbed ground

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply only chain link MS galvanised fencing (mesh size 100x100mm) complete all as specified and directed

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S & F Tie bars with screwed ends nuts, washers and mild steel plates for walls, chimneys, roofs arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

Dismantling unframed timber scantlings 40 sq. cm and under in section,o in fillets, rails, posts, rafters, purlins, etc. in any position

S & F rolled mild steel work in tubular trusses, purlins etc. including special shaped, gusset plate and nut and bolt including washers, hinges and locking arrangement incl tower bolt ,sliding bolt etc complete using ERW or induction butt welded tubes conforming to Gde St-240 and painted one shop coat of zinc chromate primer paint (including preparation of surface) at contractor's workshop before fabricationand two coat synthelic enamel paint over shop coat after fabrication complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, gypsum, POP, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Providing and fixing of designer ceiling board of size 600 x 600x4mm thick pre-painted ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid system with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centres securely fixed to the structural soffits by approved hangers at 1200mm maxiumum centres. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of feach main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200 mm long cross tee (with double stitching) to be interlocked between main renders at 600mm to be supoorted independently. 600x600mm modules to be formed by fitting 600mm long cross tee centrally between the 1200mm cross tee. Tee, Permimeter wall angle shall be of 0.45mm thick GS sheet, complete all as specified and directed. (Make : Saint Gobain, Everest)

Dismantling corrugated asbestos sheeting, any gauge, thickness, including nainital or similar pattern roof coverings etc complete all as specified and directed.

S & F 2mm thick UV resistance polycorbonate colour coated roofing sheet as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

Deduct Schedule of Credit of Rs. (-) 136100.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

M/S SANJAY STEEL WORKS (BID ID -3354389)

K S BUILDERS (BID ID -3353548)

SUBASH CHANDER (BID ID -3354224)

M/S SHUBAM ENGINEERS (BID ID -3354220)