REPAIRS TO FENCING PATH GATE AREA DRAINAGE AND ALLIED WORKS TO OFFICERS MD ACCN UNDER AGE B/R II AT DSSC WELLINGTON

Amount

Dismantling post/struts (wood,steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and as directed

Dismantling MS steel work of any descrption not other wise provided for complete all as specified and as directed

Dismantling fencing wire mesh of any type and thickness complete all as specified and as directed

Dismantling barbed wire of any type ccomplete all as specified and as directed

Excavation in Post Holes ( or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed

M&L for providing PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed and to be fitted with washer and the hexogonel or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed

Supply only chain link MS galvanised fencing any size or type and any thick complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed

S&F MS round bar 10 mm dia fixed indepently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 complete all as specified and as directed

S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed

M&L for removing the steel gates with or without removing the gate pillars and re-fixing the gates to the existing or new pillars by changing the location of the hinges through necessary cutting and rewelding /re-fixing the hinges, aldrops, stoppers etc complete all as specified and as directed

Repair to existing rolling shutters area n.exc 9sqm, without ball bearing, spring as specified including top cover, anchoring rod, hasp and staple; erected in position as indicated, complete; push pull or manual type and rewelding, rops, stoppers, oiling, greasing, easying etc including necessary replacement of profile, if required grid channel complete all as specified and as directed by Engineer in charge

S&F galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and fixing to MS round bar nibs to RCC/Steel posts with new GI wire ( Note :-Each line of wire to be measured) complete all as specified and as directed

Description all as per item No 15 above but fixed in repairs old barbed wire of any description obtain from item No 4 complete all as specified and as directed

M&L for 2 coats of synthetic enamel painting over a coat of red oxide zinc crome on new steel surface of any description over 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed

M&L two coats of synthetic enamel paint over a coat of red oxide primer including preperation of new steel surfaces, n exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Demolition of brick work/PCC block masonry/stone masonry etc built in cement mortar, incl all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed

M&L for precast cement concrete Type C-1 1:3:6 (using 20mm graded stone aggregate)solid building blocks masonary exc 10 cm in width and setting in cement mortar 1:4, type C-1, 1:3:6 (20 mm graded agregate ) complete all as specified and as directed

M&L for Providing precast cement concrete type C1, 1:3:6 (20mm grades agg) in CM 1:6 in as in kerb stone and setting in mortar complete with joints to match incl dismantling/excavation for fixing complete all as specified and as directed

Refixing of old kerb stone in cm 1:4 on road edge including taking down old kerb stone of any description complete all as specified and as directed.

M&L for PCC 1:2:4 Type B0 using 12.5mm graded aggregate as in haunching/coping smooth finished as required including necessary form work. Complete all as specified and as directed

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (110mm bore) in repairs complete all as specified and as directed

M&L for 40mm Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in repairs complete all as specified and as directed

S&F UPVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls (75mm bore) in repairs complete all as specified and as directed

S&F PVC (SWR) bends any radius 110 mm bore. complete all as specified and as directed

S&F PVC (SWR) bends any radius 75 mm bore. complete all as specified and as directed

S&F in repair 300 mm, MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed

Taking down cement plaster any description on brick or stone walls etc including raking out joints, haking for key scrubbling down with water etc. complete all as specified and as directed

Rendering 15mm thick in cement mortar 1:4 on fair face of stone surfaces /brick finished even and smooth without to using extra cement complete all as specified and as directed

M&L for preparation of new plastered external wall surfaces and applying two coats of acrylic emulsion exterior paint Apex Ultima of Asian Paint (weather coating) over a coat of primer after applying wall care putty complete all as per manufactured instruction and as directed by Engineer in Charge.

M&L for preparation of new plastered external surfaces and appying two coats of cement based paint over on coat of primer on the surface of wall as required all as specified

Demolition of Concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed

M&L for Cement concrete type B-1, 1:2:4 (20mm graded agg) 40 mm thick even and fair to receive top layer complete all as specified and as directed

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded agg) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Chequerd cement concrete coloured tiles 300 x 300x 25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick screed bed in cm 1:6 complete all as specified and as directed

M&L for cement concrete 1:2:4 type B-1 (20mm graded agg) as in berm PCC/pavings finishing even and smooth without using extra cement incl necessary form work and casting in panel thickness n exc 200mm as site requirement complete all as specified and as directed

M&L for Machine pressed pre polished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade concrete with grey cement and no pigment laids over and including 50mm thick sand compacted layer complete all as specified.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and as directed.

M&L for Reinforced cement concrete type B1, 1:2:4 (20MM graded aggregate) nominal mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed.

M&L for Reinforced cement concrete type B1, 1:2:4 (20MM graded aggregate) as in columns, pillars, piers, posts and struts.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface of concrete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished flat surfacesall as specified and as directed.

M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .

All as per item No 46 above but 5 mm dia & over upto and including 10mm dia in stirups, spacers and binders

S&F Polycorbonate any colour (as approved) plane solid sheeting 2mm thick with side lap fixed with coach screw and washer in door, wall, gate, roof etc fixed in repairs complete all as specified and as directed

M&L for preparation of new plastered brick/stone/concrete surface including cleaning vegetation from Kerb stone, make good and applying two coats of synthetic paint complete as per manufactured instruction all as specified and directed.

M&L for preparation of old painted surfaces of steel materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L old treated contrete/stone surfaces and applying one coat of synthetic enamel paint on surfaces of wall / kerb stone over a coat of primer as per manufacture's instruction including cleaning vegetation from kerb stone/ wall complete all as specified and as directed

M&L for preparation of old plastred surfaces of wall and applying one coat of anti fungal paint (Apex tiles guard of Asian) on external wall on surfaces of parapet wall stone etc. complete all as specified and as directed

M&L for preparation of old surfaces of floors and applying one coat of anti fungal paint (Apex tiles guard of Asian) on external floor or manglore pattern tiles surfaces complete all as specified and as directed

M&L for preparation existing treatment on external surfaces of wall and applying one coat cement based paint including filling cementious wall care putty on disturbed portion of wall as required complete all as specified and as directed

M&L for fixing road delinator with PCC (1:2:4) Type B-1 using 20mm grade aggregate in the existing road incl cutting/ excavation for delinator (size 200mm x 200mm x depth 200mm) complete all as specified and as directed. (Note : Delinator supplied by department)

M&L for granite (of any type) slab 18 to 20mm thick for pillar or slab etc maching cut, bedding and jointed with grey cement slurry and pointed with white cement with admixture of pigment of match to shade of granite stone including notching or rounding of edges, grinding and polishing types over 15mm thick screed bed in CM 1:4 in repairs complete all as specified and as directed by Engr-in-Charge.

M & L for plain cement concrete type-C2, 1:3:6 (40mm garaded agg.) in surface channel and drains including necessary form work, complete all as specified and directed

M&L extra for forming fair finished drain or channel any girth in cement concrete using extra cement including forms, moulds mitred/stopped ends etc complete all as specified and directed

sree devi construction

Sree Constructions

GMS Builders

UNIQUE INDIA CONSTRUCTIONS

Shree Jayam Enterprises

AR Mohamed Yakub and Co

m/s prabakaran