GE (P) AF/GUR-21/2020-21

Amount

Demolition in cement concrete in any description and any position not other wise specified and provided as in ground floor and paving nexc. 15 cm thickness (below above ground floor) all as directed by Engr-in-Charge.

Dismantling of brick work built in cement mortar including all qoins, arches, pillars, etc.complete all as specified directed ny Engr-in-Charge.

Dismantling of wall/ floor tile including backing coat any description or any thickness led beded and pointed in any cement motar and removal to out of MD land.

Taking down cement plaster, any description on brick walls or on concrete surfaces including racking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed by Engr-in-Charge.

All as per srl item No. 5 here in before but except bricks Note:- Serviceable bricks obatined from srl item No. 2 shall be re-used in srl item No. 6 after cleaning etc complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:3:6 type C-1 (20mm graded stone aggregate) 75 mm thick in plinth protection and courtyard, finished cement surfaces even and smooth with out using extra cement , complete all as specified and as directed by Engineer-in-Charge.

M&L for 100mm thick Cement concrete type B-2,1:2:4 (40 mm gradd aggregate) graded stone aggregate as in path finished even smooth with broom finished w/o using extra cement, laid in alternate bays not exc 4 sqm and joints shall be filled with sealing compound Gde-A complete all as specified and as directed by Engr-in-charge.

M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for washed stone grit plaster on exterior walls in two layers under layer 12mm cement plaster 1:4 (1cement 4coarse sand) furrowingthe under layer with scratching tool applying cement slurry @ 3kg/sqm top layer 15mm cement plaster 1:1/2:2 ( 1white cement 1/2 coarse sand : 2 stone chipping coloured 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing & washing the top layer with brushes & water to expose the stone chipping complete all as speacified pattern decided by Engr-in-Charge.(payment for providing grooves shall be made separately). Note:- Top layer of shade be of white cement using colouring pigment & stone chipping of desired colour as approved.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for rendering 10 mm thick in CM (1:3) on ceiling or concrete surfaces, finished fair & even w/o using extra cement all as directed by Engr-in-Charge

M&L for rendering 15 mm thick in cement motar 1:6 on brick work or concrete surfaces other than fair face of brick work, finished fair & even without using extra cement all as specified and directed by Engr-in-Charge.

M&L new plastered surface applying two coat of acrylic emulsion paint over one coat of primer over 1 to 2mm thick JK/Birla Cement putty cement base putty all as specified and directed by Engineer-in-Charge .

M&L for Preparing New Plastered Surfaces of WALLS and applying TWO COATS of DISTEMPER OIL EMULSION (OIL BOUND WASHABLE DISTEMPER) over a Coat of CHALK WHITING, complete all as specified and as directed. by Engineer-in-Charge.

M&L for Complete removal of existing treatment upto plastered surfaces including preparation of old decorated surfaces of walls and cornices and applying two coat of exterior grade acrylic emulsion paint over one coat of primer and 1 to 2 mm thick cement base putty complete all as specified and as directed. by Engineer-in-Charge.

M&L for Preparation of new plaster surfaces of ceiling, and applying two coat of white wash on ceiling complete all as specified and as directed. by Engineer-in-Charge.

Preparation of old decorated surfaces of ceiling, and applying one coat of white wash on ceiling complete all as specified and as directed. by Engineer-in-Charge.

M&L for glossy chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with white cement and pigments in any colour machine preassed glazed , over cement screed bed 15mm thick cement motor 1:6 all as specified and as directed by Engr-in-charge.make nitco/arena or equivalent complete all as specified and as directed. by Engineer-in-Charge.

M&L for glazed ceramic coloured designer concept tiles matching with existing tile 350x250x7 or 450x350x7mm size as in walls set and jointed in neat cement slurry over 10mm thick recuing in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc complete all as specified and as directed. by Engineer-in-Charge.

M&L for non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over 10mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specified and as directed. by Engineer-in-Charge.

M&L for 16 to 18 mm thick granite (any type) machine cut laid over cement screed bed 15 mm thick in cm 1:6 and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including mirror polishing and bull nosing edging in any position etc complete all as specified and as directed. by Engineer-in-Charge.

M&L for 20-22 mm thick machine cut Kota stone slab flooring over cement screed bed 15mm thick in CM 1:6 and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror type polishing complete all as directed by Engr-in-Charge.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed. by Engineer-in-Charge.

S & F in repair Anodised aluminium snap grid frame work for false ceiling size of grid 605x605 mm all as specified and providing and fixing gypsum board 12 mm thick in ceiling fixed with all accessary as per manufactureer's instruction complete all as specified and as directed. by Engineer-in-Charge.

S&F 12 mm gypsum board of size 600x600 mm in existing false ceiling fixed with necessary minor work repair to grid frame work complete all as specified and as directed. by Engineer-in-Charge.

S&F 4 to 5 mm tyhick plain AC Boards as in false ceilling with three coat of white wash and making to good existing frame without disturbing the other false ceilling board complete all as specified and as directed. by Engineer-in-Charge.

Taking down corrugated steel sheeting,any gauge,thicknessincluding nainital or similar pattern roof covering complete all as specified and as directed. by Engineer-in-Charge.

S&F 0.50 mm thick pre coated thick galvalume aluminium zink coated GI based corrougated steel sheeting of any colour having tansile strength of 550 MPA as in roof covering/glading to wall fixed with self tapping screws, includng dismantling complete all as specified and directed by Engr-in-Charge.

S&F 0.80mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work , cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed. by Engineer-in-Charge.

S&F 15mm bore, GI pipe medium grade with all ISI marked fitting complete fiixed on wall, celling and floor complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm bore, GI pipe medium grade with all ISI marked fitting complete fiixed on wall, celling and floor complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections for bore of pipe 15 mm complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections for bore of pipe 20 mm complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections including cleaning for fixing and re-fixing of old 15 mm bore pipe steel tubing and connections in new or old positions with new fittings complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections including cleaning for fixing and re-fixing of old 20 mm bore pipe steel tubing and connections in new or old positions with new fittings complete all as specified and directed by Engr-in-Charge.

M&L for Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exc. 20cm girth in Stone, concrete block or slab walls complete all as specified and directed by Engr-in-Charge.

M&L for running welding and repair not exceeding 6mm mild steel work in frame structure, fencing, hold fast, rolling shutter, steel door pintel etc complete all as specified and as directed by Engr-in-Charge.

Dismantling mild steel work of any description and in any position not otherwise provided complete all as specified and as directed by Engr-in-Charge.

S&F for MS angle iron as in posts, gate and struts in angle fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing with mesh etc including all necessary drilling bolting or riveting etc and similar work confirming to Fe-290 (Gde-E-165 quality-B. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement all as specified and directed by Engr-in-Charge.

S&F Steel work in tubular trusses, pillars and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 all as specified and directed by Engr-in-Charge.

S&F in repair 950 mm dia concertina coil reinforced punched(chrome razor or blade wire with barbed top of 0.5mm thick galvanised sheet and core wire of dia 2.5mm of high tensile steel wire incuding galvanised MS staples/ Clips for tying at crossing complete including taking down of existing concertina coil complete all as specified and directed by Engineer–in-Charge.

S&F in repair Galvanized 2 stand Steel Barbed wire 2.00mm dia barbed with dia barbs at 75 mm spacing and straining and fixing to any type of stsnderd rails, straining bolts,including securing or tying at crossings with and provisuion of galvanised mild steel pins, etc incl taking down of existing barbed wire as directed (each line wire to be measured) complete all as specified and directed by Engineer–in-Charge.

M&L for Preparation of new steel surface exc 10 cm width/girth one coat red oxide primer and two coat synthetic enamel paint complete all as specified and as directed by Engineer-in-charge.

M&L for Preparation of old painted steel surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint over one coat of pink wood primer complete all as specified and as directed by Engineer-in-Charge.

M&L for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc, and surface painting, with a layer of blown grade bitumen of any penetration appolied hot @1.2 kg per sqm blinded with grit or poea size gravel @ 0.006cum per sqm and lightly tampered (area of flashings etc shall be added to the roof area) complete all as specified and directed by Engineer–in-Charge.

M&L for one coat of aluminium bituminous paint over roof including preparation of surface complete all as specified, as directed by Engineer–in-Charge and as per manufacture instructions.

M&L for 10mm thick cement morat plaster 1:4 and applying evenly primer @ 0.3 ltr/Sqm and laying of APP based polymeric membrane, 3mm thick weight not less than 3.0 kg/sqm reinforced with polyester non woven fabric membrane with end laps of the 10cm and side over laps of 7.5cm and sealing all overlaps & joints, complete, fixing membrane with thermofused the LPG flame and tack coat of industrial bitumen 85/25 ISI marked @ 1.2 kg/Sqm over clean plastered surfaces including taking down complete treatment with plaster complete all as specified & as directed by Engr -in - Charge.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (withour taking off shutters from the frame all as specified and as directed by Engr-in-Charge.

Taking down shutter of any discription n.exc 1Sqm each complete all as specified and as directed by Engr in Charge.

Taking down shutter of any discription exc 1Sqm but not exc 2 sqm each complete all as specified and as directed by Engr in Charge.

Taking down shutter of any discription exc 2Sqm each complete all as specified and as directed by Engr in Charge.

S&F 30mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge.

M&L for second class Hardwood 35 mm thickness, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters complete all as specified and as by Engr-in-Charge.

M&L for Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink wood primer complete all as specified and as directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth with 8% nickle . 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and as directed by Engineer-in-Charge.

S&F 4mm thick pane glass pin headed n.exc. 0.50Sqm in each pane fixed with oil putty including glazing pin to steel frame complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair PVC symphonic action cistern (dual flush) for to PVC low level cistern including float valve, handle & connection rod etc complete all as specified and directed by Engineer-in-Charge, Make : Hindware/ Parryware/Cera

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete and P traps complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC grating 125x125mm Squire PTMT of minimum weight 150gms complete all as directed by Engr-in-Charge.

S&F in repair chromium plated fancy type foam flow Bib taps 15 mm dia cast copper alloy with crutch or handle screwed down, screwed for iron pipe complete all as specified .Make : Jaquar/Pray/Mark.

S&F, in repair angular stop cock, 15 mm dia fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or handle screwed both ends for iron pipe or for union complete all as specified & directed by Engr-in-Charge .

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 30mm x 160mm all as specified and directed by Engr-in-Charge.

S&F in repair 10mm thick, 200mm quarter round , as bull nosing fixed with stainless steel bracket with steel screw in corner shelf all as specified and directed by Engr-in-Charge.Make Nixo/Jagour and equvalent

S&F in repair 45 cm long PVC connection with two nos PTMT nut and rubber washers suitable for 15mm bore GI Pipe of existing one etc complete all as specified and as directed by Engineer-in-Charge.

S&F stain less steel bright polished barrel tower bolt with plate with 10mm dia of shoot and 200mm long complete all as specified and as directed by Engr in Charge.

S&F 100mm long medium grade stain less steel butt hinges bright polished fix to steel chowkhat with nut and bolt complete all as specified and as directed by Engr in Charge.

S&F 250mm long, 16mm dia stain less steel bright polished door sliding bolt hasp and staple type with fixing of clips 3 Nos with fixing with nut & bolt complete all as specified and as directed by Engr in Charge.

S&F stain less steel bright polished bow handle solid type 150mm grip length fency type all as specified and as directed by Engr in Charge.

S&F two legged aluminium floor door stopper with rubber shoe 140mm long complete all as specified and as directed.

M&L for post construction ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.complete all as specified and directed by Engr-in-Charge.

M&L for post construction antitermite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed by Engr and Charge.

S&F polyester powder coated aluminium frame/chowkhat for door shutter of section 101.0x44.4 mm of gauge 16 fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyester powder powder coated aluminium door shutter top rain and middle rail of section 85x44.4 of 16 gauge and bottom rail of section 150x44.4 mm 16 gauge (all section of such type having arrangement for fixing glass/prelaminated board on one or both sides as required) incl polyester powder coated aluminium fittings such handle (2 Nos each shutter), tower bolt, locks (mortise type lock) glazing clips, rubber packing, polyester powder coated aluminium snap beading screw, hinges type B-21 150mm long (3 Nos each shutter) etc and one door stopper two legged with each leaf (shutter) complete (Glass and prelaminated board to be measured separately under appropriate item of sch A) complete all as specified and directed by Engr-in-Charge. (Make of aluminium section shall be hindalco/Jindal and equvalent)

M&L, for 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice laminations fixed between aluminium section with and including snap fitting aluminium clips of polyester powder coated along with the glass with rubber gasket, complete all as specified and directed by Engr-in-Charge. Make. Anchor/Kitply/Novapan.

S&F aluminium anodized grill DG 208 design as per approved pattern including aluminium beads etc complete all as specified and directed by Engr-in-Charge.

S&F polyester powder coated aluminium frame/chowkhat for window/ ventilator of section 63.5x38.1 mm of 16 guage fixed in brick masonery or conrcrete work by necessary drilling and rawl plug aggangement etc incl polyster powder coated of any colour anodised aluminium window & ventilator shutters side hung type without sash bars aluminium with section 44.4x44.4mm of 16 guage including necessary jointing cleats, glazing clips, rubbers packing polyester powder coated aluminium snap beading, screw, polyester powder coated aluminium anodised fittings such as peg stays 150mm long (1Nos), Hinges type B-21 100mm long (2Nos) suitable handle 1 Nos complete all as specified and directed by Engineer-in-Charge.

S&F in repair ISI marked hydraulically regulated door closer die Aluminium body type complete suitable for door shutter width upto 1.50 mtr and weight between 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain printed PVC Sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beaading of 10mm x 10mm used instead of exposed portion of PVC sheet beading for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge.

M&L For Preparation old decorated plastered and unplastered surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and washing with water and applying two coat of white wash complete all as specified and directed by Engineer-in-Charge.

Dismantling of asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed by Engr-in-Charge

S&F 6mm thick asbestor cement corugated or semi corrugated sheet in roof covering or wall fixed with L-type or J-type or cranked hook bots etc complete all as specified and as directed by Engineer-in-Charge.

S&F Asbestos cement 6mm thick in two pieces adjustable plain ridge fixed wirth l-type and J-type or cranked hook bolts complete all as specified and as directed by Engr-in-Charge.

Note:- The amount of Rs 118105/- against Schedule of Credit on Page No 137 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

M/S CHANDER MUNI

PAWAN KUMAR

NAVREET CONSTRUCTION

M/S ujjwal associates