SPECIAL REPAIRS TO BLOCK NO B-1 TO B-10 AT DRDO TOWNSHIP KANCHANBAGH HYDERABAD

Amount

Taking down cement plaster upto the height of 15 metre on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

Demolition of brick /stone masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and directed.

Brickwork with fly ash bricks old size straight or curved on plan exceeding 6 metre mean radius , built in CM 1:6 complete all as specified and directed.

Rendering 15mm thick in CM 1:6 on brick work or concrete surfaces finishing the surface even and smooth with out using exta cement complete all as specified and directed.

Rendering 15mm thick in CM 1:4 mixed with water proofing liquid and finishing the surface even and smooth with out using exta cement on external walls complete all as specified and directed. NOTE:-1. Upto heihgt of 3 rd floor ,double scaffolding shall be used . 2. Water proofing liquid shall be measured and paid separately under respective item of this Schedule.

Rendering 5 mm thick, in cm 1:3 on ceiling ,chajjas and facias and finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling complete all as specified and directed.

Complete removal of existing treatment from surfaces of walls incuding pilasters, cornices etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., and applying three coats of white wash on walls complete with cracks filling with wall care putty etc complete all as specified and directed

Complete removal of existing treatment from surfaces of walls incuding pilasters, cornices etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., and applying three coats of white wash on ceiling complete with cracks filling with wall care putty etc complete all as specified and directed

Preparation of new plastered surfaces of walls and applying two coat of acrylic emulsion distemper over a coat of alkali resistant primer and over two coats of internal grade wall care putty ( total thickness not less than 1.50mm in two coats ) finished even and smooth, complete all as specified and directed

Complete removal of existing treatment from surfaces of walls incuding pilasters, cornices etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., and applying two coat of acrylic emulsion distemper over a coat of alkali resistant primer and over two coats of internal grade wall care putty ( total thickness not less than 1.50mm in two coats ) finished even and smooth, complete all as specified and directed

Complete removal of existing treatment from surfaces of walls incuding pilasters, cornices etc., by scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots with wire brushes and removing existing loose particles etc., and applying two coats of weather-proof exterior emulsion paint over a coat of alkali resistant primer and over two coats of external grade wall care putty ( total thickness not less than 1.50mm in two coats ) finished even and smooth, complete all as specified and directed

Digging out and removing sunken floor filling and depositing the same at a distance not exceeding 250m away from the outer edge of building complete all as specified and directed.

Plain cement concrete 1:4:8 type D 2 using 40mm graded stone aggregate as in filling of sunken floors complete all as specified and directed.

Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, mixed with water proofing liquid and finishing the surface even and smooth with out using extra cement on external walls complete all as specified and directed. NOTE:- Water proofing liquid shall be measured and paid separately under respective item of this Schedule.

Supply only water proofing liquid complete all as specified and directed.

Applying two coats of NITOBOND SBR polymer modified coating to a thickness of 1mm ,1st coat (Nitobond SBR Chemical 1litre ,water 2 litres ,cement 3 kgs ) and second coat (Nitobond SBR Chemical 1litre ,cement 3 kgs ) including preparation thoroughly without any traces of dirt or laitance as in sunken floors complete all as specified and directed.

Vitreous china squatting pan 'Orissa" pattern, size 580x440mm white, integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti-syphonage pipe, WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish etc including taking down the existing one complete all as specified and as directed

Taking up or down steel tubing and connections, 15mm bore, complete all as specified and directed.

Galvanised Steel water tubing of 15 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing and including making good to match with the existing surface complete all as specified and as directed.

Taking up or down steel tubing and connections, 20mm bore, complete all as specified and directed.

Galvanised Steel water tubing of 20 mm bore, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors including testing and including making good to match with the existing surface complete all as specified and as directed.

Taking down wooden/steel chowkats or frames not exceeding 1.5sq.m each (without taking off shutters from the frames), complete all as specified and directed.

Taking down wooden/steel chowkats or frames exceeding 1.50 sqm but not exceeding 4.0sq.m each (without taking off shutters from the frames), complete all as specified and directed.

Second class hard wood plain, solid straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue and pinned at joints complete all as specified and as directed.

Pressed steel door frames for doors of size 125mm x 60mm x 1.2mm thick sheet with one or more rebates including necessary fixing lugs, 3 Nos mild steel medium weight colled rolled butt hinges 125 mm size , lock strike plate, etc. frame filled with PCC 1:3:6 type C1 uising 12.5 mm graded stone aggregate complete frame complete all as specified and directed.

Pressed steel door frames for doors of size 105mm x 60mm x 1.2mm thick sheet with one or more rebates including necessary fixing lugs, 3 Nos mild steel medium weight colled rolled butt hinges 125 mm size , lock strike plate, etc. frame filled with PCC 1:3:6 type C1 uising 12.5 mm graded stone aggregate complete frame complete all as specified and directed.

35mm thick Flush shutters, , factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides and including provision of teakwood lipping 6mm tthick fixed with nails / screws complete all as specified and directed.

25mm thick Flush shutters factory made, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Second class hardwood Glazed and skeleton shutters, 35mm thick, factory made, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.

Preparation of new or previously untreated surfaces wood and wood based materials, of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.

Single action spring mild steel with steel wire springs stove enamelled black 125 mm long complete all as specified and directed .

100mm size Butt hinges medium weight stainless steel complete all as specified and directed.

50mm size Butt hinges medium weight stainless steel complete all as specified and directed.

150mm long,extruded aluminium handles, fabricated type, anodised, complete all as specified and directed.

125mm long,extruded aluminium handles, fabricated type, anodised, complete all as specified and directed.

300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

Aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

Mild steel Mortice lock vertical type 100mm 4 levers with two keys complete all as specified and directed.

Taking down steel ventilators /windows with frame not exceeding 1.50sq.m each (with out taking off shutters from the frame )complete all as specified and directed.

UPVC sliding type three track window with out sash bars with 5 mm thick plain glass for glazing shutters and stainless steel wire of 0.56mm nomonal dia of wire and average width of aperture 1.00 mm as in mosquito net of apprved quality for gauzed sutters and including necessary hinges /rollers ,handles and locking system as per manufacturers instructions complete all as specified and directed.

UPVC ventilors with 4 mm thick frosted glass pin head for fixed half sutter and half of the portion with openable double sutters top hinged with 4 mm thick frosted glass pin head glazing shutters and stainless steel wire of 0.56mm nomonal dia of wire and average width of aperture 1.00 mm as in mosquito net of apprved quality for gauzed sutters and including necessary hinges ,handles and locking system as per manufacturers instructions complete all as specified and directed.

UPVC ventilors with 4 mm thick frosted glass pin head with lovered glass pieces and stainless steel wire of 0.56mm nomonal dia of wire and average width of aperture 1.00 mm as in mosquito net of apprved quality as per manufacturers instructions complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as sepecified and directed.

Preparation of new or previously untreated steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint over complete all as specified and directed.

Galvinised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks for wooden doors or with nut bolts and suitable MS beading for steel windows complete all as specified and directed.

Aluminium hat and coat hooks solid body 250mm long complete all as specified and directed.

Demolition of plain cement concrte in ground floors /pavings not exceeding 15 cm thick below or ground level in patcches(repairs) complete all as specified and directed.

40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floor finished the surface even and smooth without using extra cement complete all as specified and directed.

75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection and path laid in alternative bays finished the surface even and smooth without using extra cement including necessary formwork including making 10mm wide grooves to full depth at 3 metre interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight complete all as specified and directed.

100 mm thick plain cement concrete in 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floors complete all as specified and as directed.

Coloured chequered cement concrete tiles of size 300mm x 300mm x25 mm thick of any shape in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of 15mm thick screed bed or bedding layer in CM 1:4 including dismantling of existing tiles complete all as specified and directed.

Non - skid Ceramic coloured tiles (Grade B-IIa) of superior quality of size 600mmx600mmx 7 to 8 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of15mm thick screed bed or bedding layer in CM 1:6, including dismantling of existing tiles complete all as specified and directed.

Non - skid Ceramic coloured tiles (Grade B-IIa) of superior quality of size 300mmx300mmx 7 to 8 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including provision of15mm thick screed bed or bedding layer in CM 1:6, including dismantling of existing tiles complete all as specified and directed.

Glazed ceramic tiles (Grade B-IIa) of superior quality in vertical surfaces such as dado 300x450x 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match, laid over and including 10 mm thick backing coat in CM 1:4 complete including dismantling of existing tiles complete all as specified and directed.

Machine cut Granite (of any type) stone slab of 18-20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including half round moulding , laid over and including provision of 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note : Granite stone slab shall not be more than in two pieces in case of L-shaped cooking platform and in other cases, it should be in piece only.

Machine cut kota stone slab flooring 20-25mm thick of required size over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including provision of15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed.complete

Machine cut kota stone slab in vertical surfaces such as skirting 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including provision of10mm thick backing coat in CM 1:4, complete all as specified and directed.complete

Green marble work 18 to 20 mm thick ( table rubbed and polished) in steps ,jambs ,pillars ,window cills , cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and including provision of10mm thick backing coat in CM 1:4, complete all as specified and directed.complete

Dismantling of boarding of any description fixed in any position with screws complete all as specified and directed.

18/19 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber framework complete all as specified and directed.

Continious (piano) hinges of flap width 19mm ,mild steel bright finish or electogalvanised complete all as specified and directed.

Second class hard wood plain fillets not exceeding 13 sqcm bull nosed ,splayed ,chamfered or rounded on one edge or face complete all as specified and directed.

40mm dia aluminium anodised cupboards knobs fixed with nut ,screw and washer including taking down existing knob complete all as specified and directed.

Tubular drapery rods ornamental type for curtains, powder coated aluminium 25mm dia including taking down unserviceable curtain rod of any size, complete all as specified and directed.

Mild steel pre-painted brackets suitable to hold the drapery rods with sofio phenol (Latto) suitable to drapery rod of 25mmdia decorative type with suitable adhesive complete all as specified and directed.

Sinks with drainage board made of stainless steel 1.00mm thick kitchen with plugs, washers and wastes; including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repairs including 40mm bore CP waste coupling (half or full threaded ) including taking down existing one complete all as specified and directed.

Kitchen stainless plate rack of size 750x900mm ,1 mm thick complete all as specified and directed.

Tubelar towel rail 600 mm long brass Chromium plated 20 mm dia D type fixed to wall etc including taking down existing one complete all as specified and directed.

Demolition of RCC water tank and beams including removing the demolished material from the site complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), 750 litre capacity (ISI embossed), double layered, hoisted and fixed in position including 20mm PTMT heavy duty ball valve complete all as specified in SSR Part I complete all as specified and directed.

20 mm bore Gun metal, globe or gate valves with iron wheel head, ISI Marked screwed both ends for iron/GI pipe and fixed including taking down existing gate valve complete all as specified.

PVC valveless, syphonic action type, flushing cistern, 10 litre capacity, low level, white, with inlet, ball valve, float and handle including brackets, jointing with existing 32mm dia flush pipe and connections to pipes and fixing of chain and pull, or lever, taking down existing unserviceble one complete all as specified and directed.

Wash hand basin, Vitreous China , first quality, white colour, of size 580x450mm including cutting for and pinning in ends of brackets or erecting stand, with and including GI brackets, ,32mm dia PVC waste pipe ,32mm bore CP waste coupling (half or full threaded ) including taking down existing one complete all as specified and directed.

Stainless steel chromium plated soap dish to be embeded in the wall including taking down existing one complete all as specified and directed

Bib taps, cast copper alloy, fancy type, chromium plated, long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule , 15mm bore, with CP flange, including taking down old bib tap of any dia, complete all as specified and directed.(Minimum weight 550grams per each)

Brass chromium plated swivel shower rose 125mm dia with shower arm 15mm bore ,195 mm long with bend 45 º with flange , including fixing to steel pipe or union, including taking down unserviceable shower of any size, complete all as specified and directed.

Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15mm bore, including taking down old pillar tap of any dia, complete all as specified and directed.

Stop valves, cast copper alloy, fancy type, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, 15mm bore, including taking down unserviceable stop valve of any size, complete all as specified and directed.

Angle cock , cast copper alloy, fancy type, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, 15mm bore, including taking down unserviceable stop valve of any size, complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600mm, both ends having brass coupling nut and PVC washers, complete all as specified and directed.

75 mm bore cast iron sand cast waste and vent pipes in any length with or with out ears with lead joints laid in floors including dismantling of unserviceable pipes complete all as specified and directed.

75 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with covers including dismantling of unserviceable bends complete all as specified and directed.

100 mm bore cast iron sand cast waste and vent pipes in any length with or with out ears with cement joints fixed to walls with holder bat clamps including dismantling of unserviceable pipes complete all as specified and directed.

100 mm bore cast iron bends or Y bends (any radius), diminishing pieces or tapers (larger bore measured) including dismantling of unserviceable bends complete all as specified and directed.

110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including provision of suitable size of PVC clamps including dismantling of unserviceable pipes complete all as specified and directed.

UPVC (SWR) bends any radius, 110mm bore including provision of suitable size of PVC clamps including dismantling of unserviceable bends complete all as specified and directed.

Cast iron floor trap 75 mm bore with plain / single hole chromium plated grating including jointing to waste pipe with solvent cement, fixed in PCC 1:2:4 type B1 including taking down existing floor trap complete all as specified and directed.

Roughening the surfaces of old concrete by picking ,scraping ,cleaning and washing down with water to remove all dust etc complete all as specified and directed .

Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on concrete surfaces over roof slab and parapet walls mixed with water proofing liquid and finishing the surface even and smooth with out using exta cement, complete all as specified and directed. NOTE:- (i)Water proofing liquid shall be measured and paid separately under respective item of this Schedule. (ii) The work to be carried out at 3rd Floor roof.

APP based polymeric membrane minimum weighing 3.5 kg / sq. m and minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 160 gms / sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 litre/sq.m by forced application then applying one coat of bitumen @ 1.2 Kg / sq.m and applying one coat of aluminium paint @100ml /sqm complete all as specified and directed. The complete roof treatement shall be consisting of as under :- (i) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 litre / sqm (ii) Applying one coat of bitumen of grade 85/25@ 1.2 Kg / sqm (iii) Laying of APP based membrane of specified thickness and weight. (iv) Applying two coats of aluminium paint @100ml /sqm

LDPE pipe 40mm bore of presuure rating 6kgs /sqcm fixed to walls ,ceiling or in floors complete all as specified and as directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Brass chromium plated wall mixer three-in-one systen for mixing hot & cold water screwd down for iron pipe and fixed complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation of poles, cables, pipes ,stays and struts etc, and getting out in hard /dense soil complete all as specified and directed.

100mm bore salt glazed stone ware drain pipes Grade 'A' laid in trenches and jointed in CM (1:1) including testing after the pipes are laid and including taking down existing one complete all as specified and directed.

150mm bore salt glazed stone ware drain pipes Grade 'A' laid in trenches and jointed in CM (1:1) including testing after the pipes are laid and including taking down existing one complete all as specified and directed.

Concrete bed to drain pipes of 100mm bore, using cement concrete 1:4:8 type D2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed

Concrete bed to drain pipes of 150mm bore, using cement concrete 1:4:8 type D2 using 40mm graded stone aggregate including packing under and haunching against the sides of pipes after they are laid and tested and including complete all as specified and directed.

Returning, filling in, in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25cm., complete all as specified and directed.

Removing surplus excavated soils to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

Mild steel TMT bars of grade Fe-500 of bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Precast reinforced cement concrete 1:2:4 type B1 using 20mm grded stone aggregate as in cover slabs (for man holes etc), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match, complete all as specified and directed. (Note: Reinforcement shall be measured and paid for separately under relevant item).

150X150mm salt -glazed stoneware gully traps,square or round mouthed type 'P' including taking down existing one complete all as specified and directed.

Rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Taking down old unserviceable LT UG cable of 3.5 core x35 sqmm complete all as specified and as directed.

Spreading of natural, clean and dry river sand in trenches for cable protection, complete all as specified and directed. NOTE:- Punned thickness shall only be measured and paid.

Supply and laying common burnt clay Bricks class 'B' designation 75 old size 230mm x 115mm x 75mm in trenches for cable protection, complete all as specified and directed.

Galvanized iron tubing light grade of the size 50mm dia for protection of cable at road crossing /on poles and tubing to be sealed at both ends after laying the cables complete all as specified and directed.

XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor, LT 1100 volts grade, ISI mark as per IS-7098 (Part -1) -1985, cross-sectional area 35sq.mm 3.5 core, laid in trenches / on poles / walls including provision of suitable hardware accessories, connecting up, testing on completion and commissioning including taking down burnt out old unserviceable cable of any size complete all as specified and directed.

Cutting the road /hard standing to a size not exceeding 30cm in width and not exceeding 90cm in depth for laying/ protection pipe / water pipe line and returning filling and ramming and making good with 100 thick PCC 1:2:4 type B1 using 20mm graded stone aggregate on top including fair finishing complete all as specified and directed.

50 mm bore Galvanised water tubing ISI marked medium grade including all fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accessories such as pipe hooks, screws, clamps etcin walls/ceilings or laid in trenches including testing complete all as specified and as directed.

All as per Sl. Item No. 119 here-in-before, but 40mm bore of pipe, complete all as specified and directed.

All as per Sl. Item No. 119 here-in-before, but 25mm bore of pipe, complete all as specified and directed.

All as per Sl. Item No. 119 here-in-before, but 20mm bore of pipe, complete all as specified and directed.

All as per Sl. Item No. 119 here-in-before, but 15mm bore of pipe, complete all as specified and directed.

Gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2 for iron pipe of size 50mm bore complete all as specified and directed.

All as per Sl. Item No. 124 here-in-before, but 40mm bore of pipe, complete all as specified and directed.

All as per Sl. Item No. 124 here-in-before, but 25mm bore of pipe, complete all as specified and directed.

All as per Sl. Item No. 124 here-in-before, but 20mm bore of pipe, complete all as specified and directed.

All as per Sl. Item No. 124 here-in-before, but 15mm bore of pipe, complete all as specified and directed.

Brick masonry valve pit 500 X 500 X 500 mm (internal dimension) with sub class 'B' bricks old size built 230 mm thick walls in CM 1:4, 100 mm tick PCC 1:2:4 type B-1 as in foundation concrete, bed/ floors, coping and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces, external plaster shall be upto 15 cm below GL and mixed with water proofing compound @ 2% by weight of cement with and including 40 X 40 X 6 mm angle iron frame 3.15 mm thick MS sheet cover with locking arrangements and one No. 50 mm size 4 leavers MS lock with key in duplicate including excavation and earthwork in soft/loose soil, painting steel surface with two coats black bitumenous paint over a coat of red oxide primer complete all as specified and directed.

Sluice valve of size 80mm dia class PN 1.6 with SS spindle heavy duty flanged and drilled including jointing materials like bolt,nuts ,washers ,rubber sheet etc for rising main complete all as specified and directed.

Cutting existing steel tubing 40/ 50 mm bore for alterations of additions(each cut to be neasured ) including inserting TEE 40/50 mm for branch connection complete all as specified and directed.

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 V grade drawn through and including 20mm dia PVC conduit, medium grade, and conduit accessories, concealed in the walls /ceiling and terminated to sunken metal box of modular type and including provision of GI modular box ISI marked in the walls suitable for modular switches, sockets etc., and including modular white plates for fixing modular switches, sockets / regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly with brass screws, washers, copper lugs etc., complete all as specified and directed for one light / fan point /bell point/ceiling fan point/exhaust point controlled by one, one-way switch 5 Amp. NOTE: 1. The quoted rate shall deemed to include the cost of Modular metal flush boxes, modular white cover plate, provision of blank plates as per requirement etc. 2.Rates deemed to be including cutting groves and nitch for inserting of Modular metal boxes / conduit pipe where ever required and making good the disturbed surfaces of wall / ceiling matching with adjoining surfaces .

All as per Sl. Item No. 133 here-in-before but for one 3-pin 5/6Amp socket outlet point on independent board controlled by one one-way 5/6Amp switch, complete all as specified and directed.

All as per Sl. Item No. 133 here-in-before but for one 3-pin 5/6Amp socket outlet point on same board controlled by one one-way 5/6Amp switch, complete all as specified and directed.

All as per Sl. Item No. 133 here-in-before but controlled by two ,two way 6Amps switches complete all as specified and directed.

Point wiring complete with 4.0 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in the walls /ceiling and terminated to sunken box of modular type and including provision of GI modular box ISI marked in the walls suitable for modular switches, sockets etc., and including modular white plates for fixing modular switches, sockets / regulators etc., including 4.0sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly with brass screws, washers, copper lugs etc., complete all as specified and directed for 3-pin 15/16 Amp socket outlet point on independent board, complete all as specified and directed. NOTE: 1. The quoted rate shall deemed to include the cost of Modular metal flush boxes, modular white cover plate, provision of blank plates as per requirement etc. 2.Rates deemed to be including cutting groves and nitch for inserting of Modular metal boxes / conduit pipe where ever required and making good the disturbed surfaces of wall / ceiling matching with adjoining surfaces .

Modular Switch 6 Amps 240 V one way, 1 module complete all as specified and directed.

Modular Switch 16 Amps, 240 V one way, 1 module complete all as specified and directed.

Modular Switch 6 Amps, 240 V two way, 1 module complete all as specified and directed.

Modular Socket 6 Amps (3 pin) 2 module complete all as specified and directed.

Modular Socket 6/16Amps 2 in 1 (6 pin) 2 module complete all as specified and directed.

Modular bell push 6 Amps, 240 V one way, 1 module complete all as specified and directed.

Fan step regulator, 120W -2 Module 230Volts complete all as specified and directed.

Ceiling rose three terminal surface bakelite type AC 50 Hz 230V, complete all as specified and directed.

Buzzer electric AC 230V fish type calling bell including taking down old unserviceable one complete all as specified and directed.

Lamp holders insulated body card grip pattern suitable for batten/angular complete all as specified and directed.

Basic all purpose surface and wall mounted 4 feet 18 watts LED batten with aluminium housing and integrated electronic driver complete with all accessories internally prewired and connecting up with three core flexible copper conductor cable with suitable size complete including taking down existing unserviceable light fitting complete all as specified and directed. Make: Havells cat No.LUMINEPLUSBS18WLED865SPCSS or technocommercially equivalent in Philips/Bajaj/CG

Basic all purpose surface and wall mounted 2 feet 9 watts LED batten with aliminium housing and integrated electronic driver complete with all accessories internally prewired and connecting up with three core flexible copper conductor cable with suitable size complete including taking down existing unserviceable light fitting complete all as specified and directed. Make: Havells cat No.LUMILINEBS9WLED865SPCWH or technocommercially equivalent in Philips/Bajaj/CG

MCB SP 6 to 40 Amps, 'C'curve, working on 240V ,50Hz, 10KA breaking capacity, complete all as specified and directed.

MCB SPN 40 Amps, 'C'curve, working on 240V ,50Hz, 10KA breaking capacity, complete all as specified and directed.

Factory made epoxy powder coated MCCB distribution board TP&N 4 way double door (VTPN MCCB DB) to accommodate MCCB TPN as in comer ,with metal door IP -43 protection ,IK -09 as per IEC -61439-3 fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and 200 Amps copper bus bar ,neutral bar ,standard DIN rail ,earth bar and cable ties for cable management ,top and bottom removable gland plates with Knockout semi flush to wall and making good distrubed surfaces and touch up with the same finishes complete all as specified and directed. Note: All incoming /out going MCCB/MCBs shall be measured and paid under appropriate item .

MCB DB SPN double door 8-way sheet metal enclosure factory made suitable for MCBs 240volts confirming to IEC -61439-3 with 200 amps rated busbar ,neutral & earthing link bar ,surface mounting and making good distrubed surfaces complete all as specified and directed. Note: All MCBs shall be measured and paid under appropriate item .

MCB DB SPN double door 4-way sheet metal enclosure factory made suitable for MCBs 240volts confirming to IEC -61439-3 with 200 amps rated busbar ,neutral & earthing link bar ,surface mounting and making good distrubed surfaces complete all as specified and directed. Note: All MCBs shall be measured and paid under appropriate item .

Sub main wiring complete with 2 runs of single core 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of non-metallic rigid PVC conduit 20mm dia and its accessories on the surface of and connecting terminal ends to DB's including providing 1 run of single core 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old sub main wiring of any type and any size and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, One run of 6 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii)The rate quoted per unit shall be deemed to be inclusive of the extra length of cable /wire required for connection to MCBs .

Sub main wiring complete with 4 runs of single core 10 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of non-metallic rigid PVC conduit 32mm dia and its accessories on the surface of and connecting terminal ends to DB's including providing 2 runs of single core 10sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including taking down old sub main wiring of any type and any size and making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Four runs of 10 sq.mm copper conductor, Two runs of 10 sq.mm copper earth continuity conductor and one run of PVC conduit shall be measured as one unit length. (ii)The rate quoted per unit shall be deemed to be inclusive of the extra length of cable /wire required for connection to MCBs .

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.0mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'light grade', GI watering pipe 20mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 50mm thick RCC cover (1:2:4) mix as in cover slab with 8mm dia TMT bars as in reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:-1 Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC chamber , funnel and RCC cover plate.

Taking down ceiling fans of any sweep of any make with down rods, blades canopy etc by disconnecting the electric connections, removing worn out bearings, capacitor, bushes and over hauling/painting including replacement of minor parts like split pins, nuts, screws, washers etc and other worn out spare parts as required, greasing, reassembling and reconnecting with 3 core new flexible cord from ceiling rose to fan, testing and commission complete all as specified and directed.

MCCB with rating of 63 to 100 Amps ,415 Volts 3pole with 16 KA ultimate breaking capacity , adjustable over load minimum 70% to 100% thermal magnetic release with adjustable over load and short circuit release with electronic earth leakage module confirming to IS-13947& IEC-60947-2 & Ics =100% of Icu ,MCCB shall be with suitable spreaders and phase barriers for each terminals including taking down existing one complete all as specifeid and directed.

Heavy duty exhaust fan 300mm sweep ,1400RPM with aluminium louvers and shutters suitable for 230/240V single phase AC supply with all fixing arrangments to fix on wall, including provision of 3-way porcelain connector, copper bunched flexible three core 1.5sq.mm PVC insulated cable from connection point to fan including cutting in existing brick/PCC/RCC wall surfaces of any height ,suitable for 300mm sweep exhaust fan including making good with PCC 1:2:4 with provision of 6 mm MS rods two nos around circumrence of the hole and 4 nos in the length including making good disturbed portion both internally and externally and filling the gaps and painting complete all as specified and directed.Make:Cat part No.VENTIL AIR-DSP of HAVELLS or techno commercially equivalent in ALMONARD/BAJAJ

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised oron or steel wire complete all as specified and directed

Sai construction & services

M/s K L M INFRATECH