PROVISION OF POST CONSTRUCTION ANTITERMITE TREATMENT TO T-3 TO T-4 ANTENNA SECTION, P-153 ADM BLOCK, P-20 ATS BLDG, P-23 EDN COMPLEX and MARRIED ACCN P-24 TO P-32, P-79 TO P-81, P-84 TO P-105, P-228 TO P-241, PROVISION OF TEMPORARY SHED FOR BS

Amount

SCHEDULE 'A' PART-I [ B/R WORKS]

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as directed.

M& L for Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc complete all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded and ponited in any mortar complete all as directed.

M&L for brushing and applying neat cement slurry with 3.0 kg of cement per sqm complete all as specified & directed.

Material and labour for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in cills, steps; seismic , parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, etc and the like including weathering, slightly rounded or chamfered angles and throating, as directed

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in flooring, laid over and including 15mm thick screed in CM 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match etc complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in flooring, laid over and including 15mm thick screed in CM 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match etc complete all as specified and as directed.

Material and Labour for Glazed ceramic coloured tiles in vertical surface 450x350x 7mm/ 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including backing coat of 10 mm thick in CM 1:3 all as specified and directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm inskirtings,dados and riser to steps over and including 10mm thick back coat in CM 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match etc complete all as specified and as directed.

Material and Labour for Granite 20mm thick ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in over and including cement mortar (1 :4) 20mm thick including pointing in white cement 1 :2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation in any type of soil and getting out complete all as specified and directed.

Material and Labour for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation including form work complete all as specified and as directed.

Material and labour for Brick work with fly ash brick straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated material / soil to a distance n.exc 50m away and depositing where as directed at a level n.exc 1.5m above the starting point, complete all as specified and as directed.

Taking down cement plaster on brick walls etc including raking out joints, inserting for key, scrubbing down with water etc., complete complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6, on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar 1:6, on other than fair faces of brick/concrete surfaces finished even and smooth with out using extra cement all as specified and as directed.

Supply and fix framed work such as grills , grating ,etc with ends of bars shouldered and or revated for forged in to spike ,framed guard bars barred iron doors , ladders,balusters,walk ways raling framed work for water tanks similar work confirming to Fe -290 Gde E-165 complete all as specified and directed.

Supply and fixing Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and Labour for Two coat of synthetic enamel paint over a coat of red oxide to new steel surface exc 10cm in width or girth including preparation complete all as specified and directed.

Material and Labour for Two coat of synthetic enamel paint over a coat of red oxide to new steel surface n. exc 10cm in width or girth including preparation complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of weatherproof acrylic emulsion paint over a coat of primer paint etc complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of walls and applying two coats of weatherproof acrylic emulsion paint over a coat of primer paint etc complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Material and labour for preparing old surfaces of wall and applying two coat of oil bound distemper over a coat ofalkali resistant primer complete all as specified and directed

Material and Labour for One coat of synthetic enamel paint to old steel surface including preparation complete all as specified and directed.

Material and Labour for Preparation of old wooden surfaces and applying one coat Bees-wax polishing on surfaces of any escription, width or girth

Taking down wooden frame with shutter without taken off shutter from the frame,exceeding 1.5 sqm but not exceeding 4 sqm each including removing from site complete all as specified and directed.

Taking down wooden frame with shutter without taken off shutter from the frame,not exceeding 1.5 sqm each including removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each including removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each including refixing the same opening complete all as specified and directed.

Taking down shutters of any description not exc 1 sq. m each including removing from site complete all as specified and directed.

Supply and Fix 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fix Flush shutters 40mm , solid core construction, with partical board core and plywood face panels, both faces covered with decorative face veener with lipping / frame to match complete all as specified and directed.

Supply and fix 35mm thick 2nd class hardwood glazed and skelton window/ventilators shutters open rebated and prepared to receive glass,gauge etc (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beds for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b) and fitted to chowkats complete all as specified and directed.

Supply and fix 30mm thick 2nd class hardwood glazed and skelton window/ventilators shutters open rebated and prepared to receive glass,gauge etc (without sash bars) edge of framing plain chamfered or rounded fitted with cut and mitred beds for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(b) and fitted to chowkats complete all as specified and directed.

Supply and fix powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply & fix powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading, roller screws etc. complete all as specifieds

Supply and fix powder coated Anodised aluminium window and ventilator shutters, side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fix Sheet glass of 4.8mm thick, ordinary quality and glazing with glacin clips in square in n.exc 0.5 sq.m in each pane complete all as specified and as directed.

Supply and fix aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples complete all as specified and directed.

Supply and fix in repair aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples complete all as specified and directed.

Supply and fix Sheet glass of 4.0mm thick, ordinary quality and glazing with glacin clips in square in n.exc 0.5 sq.m in each pane complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and Supply and fixing sheet glass, ordinary quality 4.00 mm thick and glazing with oil putty/ beads in square n exc 0.5 sqm in each paneL.

Material and labour for two coat of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width and girth including preparation of new wooden surface complete all as specified and as directed.

Material and labour for two coat of synthetic enamel paint on wooden surface over 10 cm width and girth including preparation of old wooden surface complete all as specified and as directed.

Supply and fix Soild PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain coloured PVC sheet reinforced with MS Square tube, supporting & fixing in opening as per specifications all as specified and as directed.

Supply and fix Factory made solid PVC moulded Door shutter, 30 mm thick (style), consisting of frame made out of MS tubes for top & bottom rails,MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement , supplying and fixing in the frame at site as per specication and drawings given in SSR Part-II complete all as specified and as directed.

Supply and fixing steel Butt hinges 100mm size medium weight cold rolled fixed to complete all as specified and as directed.

Supply and fixingsteel Butt hinges 75 mm size medium weight cold rolled fixed to complete all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 100mm long complete all as specified and as directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 300mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

Supply and fixing stainless steel Butt hinges 100mm size fixed to complete all as specified and as directed.

Supply and fixing stainless steel barrel tower bolt of extruded section 150mm long complete all as specified and as directed.

Supply and fixing Stainless steel Handle fancy type 150mm size and fixed with screws complete all as specified and as directed.

Supply and fixing 150mm size aluminum handles, cast type anodised complete all as specified and as directed.

Supply and fixing 125mm size aluminum handles, cast type anodised complete all as specified and as directed.

Supply and fix door closer hydraulically regulated, designation No.2 universal type, of Aluminium (extruded sction body)suitable for door shutters of 701 to 850mm width and of weight between 36 to 60 kg complete all as specified and as directed.

Supply and laying, in repair of galvanised steel water tubes, medium grade 15mm bore with and including all necessary GI fittings such as bends, elbows, short piece connections, backnuts, caps plugs, unions etc., laid in trenches/wall/ceiling including testing and taking down old complete all as specified and as directed.

Supply and laying,in repair of galvanised steel water tubes, medium grade 20mm bore with and including all necessary GI fittings such as bends, elbows, short piece connections, backnuts, caps plugs, unions etc., laid in trenches/wall/ceiling including testing and taking down old complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fix in repairs , bib taps,cast copper alloy,,chromium plated,fancy type with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed of size 15 mm bore complete all as specified and as directed.

Supply and fixed in repairs ,15mm bore angle cock,cast copper alloy,,chromium plated,fancy type with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm bore concealed Stop valves, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixing pillar taps cast copper alloy with capstan heads, chromium plated,fancy type of size 15 mm bore screwed down high pressure,with or without lettered'Hot' or 'Cold' with long screwed shanks and flynut,screwed for 15mm iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair brass chromium plated over head shower with revolving joint & 150mm long shower arm complete all as specified and as directed.

Supply and fixing in repairs Vitrious China squatting pan ' Orissa' pattern of size 580 mm x 440 mm white with integral foot rest excluding flushing cistern and flush pipe including provision of lime concrete bedding including fixing in repairs complete all as specified and as directed.

Supply and fix in repair PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including 32mm flush pipe etc., including fixing in repairs complete all as specified and as directed.

Supply and fix in repairs for Wash basin, Vitreous China white (Flat back) 550 x 400mm including brackets,, pinning in ends of brackets or erecting stand etc complete all as specified and directed.

Supply & fixing in repairs Soap Dish Holder complete all as specified and directed. Make: Jaquar, Code No AKP - 35731P or equivalent in Parryware/ Hindware/Cera as approved by GE.

Supply and fixing of 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 all as specified and directed.

Demolition of AC/ CI pipe of 75 mm dia ,set in cement mortar,fixed in any position complete all as specified and as directed.

Supply and Fixing PVC SWR Pipes single socketed in any length with rubber ring joints laid in floors 75 mm dia laid in trenches or in floors/ wall complete all as specified and as directed.

Supply & fix in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410mmx 330mmx160mm complete all as specified and directed.

S&F in repairs sink cock with regular swinging spout (wall mounted model) with wall flange complete all as specified and directed. Make:- Jaquar, Code No ARI-39347 or equivalent in Parryware/ Hindware/Cera as approved by GE.

Demolition of AC/ CI pipe of 100 mm dia ,set in cement mortar,fixed in any position complete all as specified and as directed.

Supply and Fixing PVC SWR Pipes single socketed in any length with rubber ring joints laid in floors 110 mm dia laid in trenches or in floors/ wall complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed.

Supply and fixing 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fixing 110 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed.

Supply and fixing in repair, Single towel rail 600mm long complete all as specified and as directed. Make: Jaquar -AQN 7711 or equilavent in Parryware/ Hindware/Cera as approved by GE.

Supply and fixing in repairs 32mm PVC waste pipe for wash hand basin., 900mm long complete all as specified and as directed.

Supply & fixing in repairs peg set suitable with 6 Nos of hook with powder coated fixed to wall complete all as specified as directed.

Supply and fixing 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified as directed.

Supply and fixing for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified as directed.

S&F in repairs 8mm thick glass shelf corner 200mm size including SS railing complete all as specified as directed.

Supply and fixing, 15mm bore fancy type chromium plated, bib taps, cast copper alloy, with bib taps,cast copper alloy,with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified as directed. Make : Jaquar Alive 2 Way (ALI-85041) or equilavent in Parryware/ Hindware/Cera as approved by GE.

Supply and fixing Hand shower health faucet with wall 8mm dia, 1.2 mtr long flexible tube & wall hook with N.R.V (back flow preventer) for EWC including hinges with complete fitting complete all as specified as directed. Make : Jaquar (ALD-577) or equivalent in Parryware/ Hindware/Cera as approved by GE.

Supply and fixing of 25mm dia Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified as directed.

Supply and fixing of 20mm dia Stop valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified as directed.

Supply and fixing 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work in repair complete all as specified as directed.

Supply and fixing Stainless steel hinge Italian pattern suitable for cabinet and shelves opening / closing operation. and fixed with screws complete all as specified as directed.

Supply and fixing Hasp and staple, 75mm size safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified as directed.

Demolition of cement concrete in any description and in any position not otherwise specifically provided unreinforced complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C2 (Using 20mm graded stone aggregate) in plinth protection and pavings finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Grinding and polishing of existing kota stone flooring complete all as specified and as directed.

Material and labour for poat construction anti-termite treatment of peripery of internal wall (where the flooring is tile and similar) using chemical emulsion @ one liter per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2(1 part cement and 2 part coarse sand) mixed with pigment to match the existing floors complete all as specified and as directed.

Material and labour for poat construction anti-termite treatment for providing & injecting along the external wall below concrete or masonry apon using chemical emulsion @ 2.25 liter per linear meter including drilling and plugging holes etc in apron/plinth protection complete all as specified and as directed.

Material and labour for poat construction anti-termite treatment for providing & injecting at point of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.50 ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard / dense soil complete all as specified and directed.

Material and Labour for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and Labour for reinforcement Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M&L for providing reinforced cement concrete (nominal mix) in foundations, including rafts, footings, foundation beams; plinth beams ; bases for columns 1:2:4 type B-1 (using 20mm graded aggregate) etc complete all as specified and directed.

Supply and fix for rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

Material and labour for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) complete all as specified and directed.

Material and labour for prepration of new steel surface of any description exc 10cm in girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Supply and fixing galvalume single skin corrugated profiled/ Plain roofing sheet of 0.50mm thickness (Total coated Metal thickness) having tensile strength of 550 MPa, coated with hot dip metallic zinc aluminium alloy coating zincalume AZ-150 or equivalent (as per AS 1397) @ 150 gms/sqm, total on both sides of ZN (45%) & AL (55%), with super polyester colour bond XRW quality paint coat or equivalent as per AS/NZS-2728 (Category 3-4) of approved colour, total coating thickness of 35 microns of a super polyester XRW quality paint system or equivalent comprising of 20 microns (NOM) exterior coat on top surface and 5 microns (NOM) reverse coat on back surface over 5 microns (NOM) primer coat, on both surface, of approved colour shade fixed with GI self tapping fastening bolt/screw as in roof covering/cladding etc as per manufacturers instructions complete all as specified and as directed.

Supply & fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mm x1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 8mm thick calcium silicate board, 600mmx600mm size, fixed in ceiling, flat or sloping including 1mm thick wall care putty on ceiling over applying two coats of acrylic distemper over a coat of primer including preparation of new ceiling surfaces all as specified and as directed .

Excavating over areas, n. exc 1.5m in deep for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for providing reinforced cement concrete (nominal mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like in 1:2:4 type B-1 (using 20mm graded aggregate) etc complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:4, on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement all as specified and as directed.

Material and labour for 5mm thick rendering in cement mortar 1:3, on fair faces of concrete surfaces finished even and smooth with out using extra cement all as specified and as directed.

Material and Labour for preparing new plastered surfaces and applying two coat of cement base paint on walls including one coat of alkali resistance primer etc complete all specified and as directed.

Supply and fix Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) double layered hoisted & fixed in position all as specified of 1000 ltrs capacity complete all as specified and directed.

S&F in Ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete 20mm bore dia of pipe complete all as specified and directed.

Supplying and fixing or laying 25mm dia CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all specified and as directed.

Supplying and fixing or laying 20mm dia CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all specified and as directed.

Supply and fix bib taps,cast copper alloy,,chromium plated,fancy type with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed of size 15 mm bore complete all as specified and as directed.

S&F in Gun metal, globe or Gate valve 20mm bore dia, with iron wheel head, screwed both ends for iron pipe complete all as specified.

S&F in Gun metal, globe or Gate valve 25mm bore dia, with iron wheel head, screwed both ends for iron pipe complete all as specified.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation in soft/loose soil and getting out complete all as specified and directed.

Material and labour for Brick work with old size subclass 'B' brick with fly ash brick straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for providing reinforced cement concrete (nominal mix) in Beams, cantilevers, bressummers, lintels over 1.5m span in 1:2:4 type B-1 (using 20mm graded aggregate) etc complete all as specified and directed.

Material and Labour for 15 mm thick rendering in two layer ,10mm CM 1:6 in dubbing coat and 5mm thick in CM 1:4 CM mixed with 3% water proofing compound by weight of cement on concrete surfaces of surface finished even and smooth without using extra cement incl scafolding etc complete all as specified and as directed.

Material and labour for 10mm thick rendering in cement mortar 1:6, on fair faces of brick/concrete surfaces finished even and smooth with out using extra cement all as specified and as directed.

Material and labour for Preparation of newly plastered surface of walls and applying three coats white wash incl preparation of surface all as specified and as directed.

Material and labour for Preparation of newly plastered surface of ceiling and applying three coats white wash incl preparation of surface all as specified and as directed.

Prepration of new steel surface of any description not exc 60cm in girth and applying two coats of synthetic enamel paint over a coat of rex oxide primer complete all as specified.

Material and labour for damp proof course cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate 40 mm thick in shorizontal or vertical surfaces mixed with 3% water proofing compound by weight of cement including necessary formwork complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate 100 mm thick in sub base of floors including necessary form work all as specified and as directed.

Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate 50 mm thick in sub base of floors including necessary form work all as specified and as directed.

Supply only integral water proofing compound all as specified and as directed.

Material and labour for hard core with granite broken stone of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed.

Material and labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection 75mm thick surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and Labour for TMT bar 6 to 8mm dia, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Supply and fix mild steel work as in Bands, straps,hold fasts; wall ties; and similar work conforming to Fe-290, Gde E-165 complete all as specified and as directed.

Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Supply and fix Flush shutters 30mm, solid core construction, with partical board core and plywood face panels commercial type on both faces complete all as specified and directed.

Material and labour for two coat of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width and girth including preparation complete all as specified and as directed.

Supply and fixing steel Butt hinges 125mm size medium weight cold rolled fixed to complete all as specified and as directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 250mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed.

Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and Fix door stopper of aluminium alloy,anodised with hard drawn steel spring of length 140mm complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete including form work complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep in hard/dense soil and getting out complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate 100 mm thick in sub base of floors including necessary form work all as specified and as directed.

Excavating over areas, n. exc 1.5m in deep for foundation, etc and getting out in any soil complete all as specified and directed.

S&F in Ball brass valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed complete 25mm bore dia of pipe complete all as specified and directed.

Material and labour for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection 75mm thick surface finished even and smooth without using extra cement complete all as specified and as directed.

SCHEDULE 'A' PART-II (E/M Portion)

Material and labour for Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit 20mm dia (ISI marked) and accessories, wall / surface (open conduit) on ceiling with sunken type pressed steel / welded terminal boxes made out of 2mm mild steel sheet, 3mm thick laminated sheet cover for mounting of switches, socket outlets, regulators etc., including provision of FRLS PVC insulated unsheathed 1.5 Sqmm FRLS multistranded with copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following:

(a) One light/fan point controlled by one, one-way switch

(b) One switch socket combination 5 Amps on the same board

All as per item No. 159 described here - in - before but for 3/6 pin 5 Amps switch socket combination on independent board with 2.5 Sqmm copper cable and provision of 2.5 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete all as specified and as directed

All as per item No. 159 described here - in - before but for 3/6 pin 15 Amps switch socket combination on independent board with 4 Sqmm copper cable and provision of 4 Sqmm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and Fix of Switch Piano, flush type, Single Pole, 230 Volts, AC, one-way 5 Amps with ISI mark all specified and as directed.

Supply and fix in electronic type fan regulator rotary step 100 watts complete all specified and as directed. Make: Anchor Cat Part code No 38660 or equivalent.

Supply and fix Switch socket combination, multipurpose, 2 Pin 6Amps /3 Pin 6Amps controlled by one switch 5Amps, flush type, universal, ISI marked complete all as specified and as directed.

Supply and fix Switch socket combination, multipurpose 2 in 1, 3 Pin, 6/16Amps, flush type, universal, controlled by one switch 16Amps, ISI marked complete all as specified and as directed.

Supply and Fix Ceiling rose 3 terminals, surface bakelite 65 x 50mm complete all specified and as directed. Make : Anchor / Bajaj / Leader / Cona with ISI mark.

Supply and fix of Sheet metal enclosures for DBs TPN 4 way 415 V with neutral bus bar 200 Amps double door type with locking arrangement complete all specified and as directed. Make : Legrand/ Indo Asian/ Standard/ ABB/L&T.

Supply and fix Sheet metal enclosures, double door, vertical type MCCB incomer, MCB DB, 4 way, TPN, AC 415 Volts including taking out existing unserviceable DB complete all as specified and as directed. Make : Legrand/ Indo Asian/ Standard/ ABB/L&T.

Supply and fix of Sheet metal enclosures single door MCB DB 2way SPN 240 V with locking arrangement including taking out existing unserviceable DB complete all specified and as directed. Make : Legrand/Indo Asian/ Standard/ ABB/L&T.

Supply and fix of MCCB 100A four pole 415V, 50 Hz breaking capacity 16 KA with suitable enclosure complete all specified and as directed.

Supply and fix of Isolator 40 Amps, 4 pole, 415 V, complete all as specified and as directed.

Supply and fix MCB TPN, AC 415 Volts 63 Amps 10 KA, rupturing capacity, 'C' curve complete all as specified and as directed.

Supply and fix MCB TPN, AC 415 Volts 32 Amps 10 KA, rupturing capacity, 'C' curve complete all as specified and as directed.

Supply and fix MCB SPN, AC 240 Volts 32 Amps 10 KA, rupturing capacity, 'C' curve complete all as specified and as directed.

Supply and fix MCB SPN, AC 240 Volts 40 Amps 10 KA, rupturing capacity, 'C' curve complete all as specified and as directed.

Supply and fix MCB SP, AC 240 Volts 6A to 32 Amps 10 KA, rupturing capacity, 'C' curve complete all as specified and as directed.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 4 runs of 4 sqmm drawn through in and including suitable size PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in walls and all accessories along with 2 run of 2.5 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 4 runs of 4 sqmm cable along with 2 run of 2.5 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length.

Supply and fix in repairs LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver including Stellar bright 20 watt TLED box type complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. Make : PHILIPS Cat No. Stellar Bright TLED 6500K with Batten or equivalent to C&S/Crompton

Supply and fix in repairs LED mirror light fiiting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. Make : C&S Cat Part No LTTB2F10WLED/W or equivalent in Philips / Crompton.

Supply and fix in repairs LED Security light fiiting 15 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, including necessary suitable clamps & bracket GI Tubing medium grade 1mtr long bend into shape including taking down existing fitting complete all as specified and as directed. Make : C&S Cat part No LTESSE15WLED or equivalent in Philips / Crompton Greaves.

Supply and fix Air curtain of velocity 20/22 m/Sec, with motor rating 550x2 W 1440 RPM complete all as specified and as directed. Make :Almonard Model AIB-6' equivalent in Crompton Greaves/Bajaj/Havells.

Supply and fix Wall mounting fan 450mm sweep 3 blade high flow wave single phase 230 V connecting to ceiling rose terminals 1.5sqmm 3 core copper flexible cable as required complete all as specified and as directed. Make: Crompton Cat No. ACVORTEX18WM or equivalent in Havells/ Bajaj/Usha.

Supply and fix Exhaust Fan of size 450 mm sweep, heavy duty, AC 230 V, 50 Hz, 1400 RPM frame ISI marked including starting capacitor and connecting to ceiling rose terminals 1.5sqmm 3 core copper flexible cable as required complete all as specified and as directed. Make: Crompton Greaves /Bajaj/Usha.

Supply and fix MCB protected socket (Modular AC Box) 3 module in sheet plastic box (with SP mini MCB) of capacity 25Amp complete all as specified and as directed. Make:- Standard Cat No. DSDTCSN0251025 or equivalent in L&T/Legrand/ Indo Asian

Earthing complete with GI earth plate electrode 600 x 600 x 6.0mm buried directly in ground vertically to a depth not less than 2.25 M below GL with top edge of the earth plate not less than 1.5 M below normal GL connected with GI earth wire 4mm dia by means of bolts, nuts check nut and washers of GI and earth wire protected by GI pipe 40mm bore light grade and watering pipe 20mm bore GI pipe medium grade including one test point for testing purpose with funnel and connected to switch/control board upto 7.5m away from earth electrode including earth work, PCC (1:3:6) type C-1 chamber, RCC (1:2:4) type B-1cover slab 50mm thick with 8mm dia TMT bars reinforcement both ways at 140mm C/C, charcoal, salt, water pipe, wire mesh, lugs etc and testing complete all as applicable and as per Plate No. 3 of SSR 2009 and all as specified. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 20 mm dia watering pipe, wire mesh,40mm dia light grade GI protection pipe for earth strip etc., complete.The rate quoted shall be deemed to include for Earth continuity conductor and GI protection pipe upto 7.5m.

Supply and installation, testing,commissioning of water cooler partially stainless steel electric driven single phase having approx storage 80 ltrs and nominal cooling capacity 40 ltrs/hr complete all as specified and directed by Engineer-in-Charge. Make- Voltas / Blue star / Usha /LG

Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and designed for input variation between 170 V to 250 V with output voltage at 230 V with accuracy of + or - 2.5% and 170 to 270 Volts suitable for water cooler complete all specified and as directed. Make:- V Guard VG-400 or equivalent as approved.

Supply and Lay galvanised iron tubing medium grade 20 mm bore with all necessary fittings, cutting thread and laid in trenches/wall/floor all as specified and as directed.

Material and labour for sleek round recessed mounting LED downlight with AL die cast body, finisg with drop down PC diffuser to deliver low glare illumination with optimised heat sink for efficient heat dissipation all as specified and directed by Engr-In-Charge Make :- Bajaj Cat No BGSLO SLEEK 3W WH RD or equivalent in Philips / Crompton Greaves/C&S.

Material and labour for recessed mounted deep recessed adjustable downligt for good-quality to enhance the siplay of retail showroom accent lighting all as specified and directed by Engr-In-Charge Make :- Bajaj Cat No BRDCSL 6W WH or equivalent in Philips / Crompton Greaves/C&S.

Supply and fix of Sheet metal enclosures for DBs SP 8 way 240 V with neutral bus bar 200 Amps double door type with locking arrangement including taking down U/S DB complete all specified and as directed. Make : Legrand/ Indo Asian/ Standard/ ABB/L&T.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and including suitable size PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in walls and all accessories along with 1 run of 4 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 2 runs of 6 sqmm cable along with 1 run of 4 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length.

S&F Water heater (Geyser) 25 Ltr capacity 220V 50Hz frequency Vertical storage type all as specified and as directed by the Engr-In-Charge Make : Bajaj Model No Bajaj Calenta Digi 25L or equivalent in Crompton/Havells/ Usha

S&F of wall mounting fan 400mm Sweep 3 blade high flow wave, single phase 240V incl suitable flexiable coppper wire from ceiling rose to wall mounting fan make good to the distrubbed surfaces and match with existing colour all as specifed and directed Make : Crompton model High Flow wave or equivalent in Bajaj/Havells/Usha

Supply and fix of Sheet metal enclosures for DBs TPN 6 way 440 V with neutral bus bar 200 Amps double door type with locking arrangement including taking down U/S DB complete all specified and as directed. Make : Legrand/ Indo Asian/ Standard/ ABB/L&T.

Supply and fix MCB TPN, AC 415 Volts 40 Amps 10 KA, rupturing capacity, complete all as specified and as directed.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 4 runs of 10 sqmm drawn through in and including 40mm dia size PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in walls and all accessories along with 2 run of 6 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 4 runs of 10 sqmm cable along with 2 run of 6 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc.

Material and labour for Sub main wiring with PVC insulated unsheathed 1100 volts FRLS grade single core multi stranded copper conductor cable 2 runs of 1.5 sqmm drawn through in and including suitable size PVC conduit heavy duty ISI marked(IS 9537 Part III) fixed in walls and all accessories along with 1 run of 1.5 sqmm PVC insulated unsheathed copper conductor single core multi stranded cable 1100V FRLS grade as earth continuity conductor and connected to common earth dolly complete all as specified and as directed. Note: 2 runs of 1.5 sqmm cable along with 1 run of 1.5 sqmm cable for earth conductor and one run of PVC conduit shall be measured as one length.

Supply and Fix in repairs LED 36W 2'X2' WHITE POWDER COATED CRCA FULL GLOW RECESS MOUNTING LED BACKLIT PANEL ,environmental friendly new generation, asthetically designed, ultra modern recess mounting with high briteness, suitable for armstrong/grid ceilling including taking down existing fitting complete all as specified and as directed. Make: C&S Cat Part No.LTCRR36WLED2X2 or equivalent in Philips/ Crompton/Bajaj/Wipro

SRI LAKSHMI GANESH ENGINEERING WORKS

JR ENTERPRISES