Loading
Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹2.9 L
Closing Date
26 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
DIVISION
13 conditions · 2 needing a document upload
Financial Eligibility Criteria:--- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility Criteria:--- (a) The tenderer must have successfully completed any of the following during last 07(seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, OR Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, OR One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, OR Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, OR One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. (Please refer Tender booklet for further clarification) Similar Nature of work - Any track works by manually or mechanical means involving deep screening or TSR or TRR or Casual Renewals or TWR or turnouts or dismantling of tracks etc.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per tender document attached.
Tenderers may please note - During lockdown period (declared due to COVID - 2019 pandemic) - A) Necessary authority to travel to site of work on a specific request indicating date shall be issued by Railway Administration to facilitate site visit. B) TC meetings and Negotiation can be conducted through online Video/Audio chat on conference call. Record of same should be kept.
Miscellaneous P.way work under SSE(P.way) AK under ADEN AK.
DRMWBSL142026t1
DRMWBSL142026t1
Open
Works - General
12 Months
Jalgaon, Maharashtra
₹0
₹2.9 L
26 May 2026
4 May 2026
12 May 2026
82 items across 1 schedule · ₹1,95,33,042.88 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | In all conditions and classifications of soil except rock | cum | 200.00 | 98.7 | 19,740 |
| 2 | Up to 40 m long rail panel | RM | 2000.00 | 9.51 | 19,020 |
| 3 | For Through Rail Renewal work | TRM | 1000.00 | 46.67 | 46,670 |
| 4 | For Casual/Scattered Rail Renewal work | RM | 500.00 | 36.96 | 18,480 |
| 5 | For Through Rail Renewal work | TRM | 1000.00 | 48.12 | 48,120 |
| 6 | For Casual/Scattered Rail Renewal work | RM | 500.00 | 39.13 | 19,565 |
| 7 | Locations other than Ballasted Deck Bridge | Each | 1200.00 | 492.23 | 5,90,676 |
| 8 | Ballasted Deck Bridge | Each | 500.00 | 581.53 | 2,90,765 |
| 9 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in-Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper | 5000.00 | 23.7 | 1,18,500 |
| 10 | Through replacement of Grooved Rubber Sole pads(GRSP) on PSC sleepers duly removing the ERCs and liners and replacing the GRSP by just lifting the rail after cleaning the rail seat, refixing the liner and ERC after greasing o f ERCs, liners and Liner contact area including sealing with Contractor's Grease Graphite Grade 'O' (IS:408) duly cleaning of rust/scale of ERC, Metal /GFN liners & SGCI insert by using wire brush, scrapper/sand emery paper etc., with all contractor's labour, tools, plants including collection and stacking of released materials at nominated locations within SSE Jurisdiction and as directed by Engineer-in-Charge. Note: GRSP will be supplied at SSE/stores/depot. | Sleeper | 2000.00 | 21.11 | 42,220 |
| 11 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer-in-charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt. | Set | 1000.00 | 54.45 | 54,450 |
| 12 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 252320.00 | 3.92 | 9,89,094.4 |
| 13 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 9500.00 | 48.89 | 4,64,455 |
| 14 | By using Contractor's Grease Graphite | Each | 20000.00 | 34.48 | 6,89,600 |
| 15 | GRSP | Each | 1000.00 | 21.58 | 21,580 |
| 16 | ERCs | Each | 1000.00 | 7.2 | 7,200 |
| 17 | Metal/GFN Liners | Each | 1000.00 | 4.8 | 4,800 |
| 18 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the s c r e w w i t h specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 3600.00 | 265.86 | 9,57,096 |
| 19 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 6.00 | 8,758.16 | 52,548.96 |
| 20 | Sleepers up to 2.85 m length | Each | 70.00 | 632.4 | 44,268 |
| 21 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 30.00 | 871.44 | 26,143.2 |
| 22 | Sleepers of more than 4.20 m length | Each | 40.00 | 1,373.66 | 54,946.4 |
| 23 | For 1 in 12 Turnouts | Set | 10.00 | 5,240.13 | 52,401.3 |
| 24 | For 1 in 8.5 Turnouts | Set | 6.00 | 4,192.1 | 25,152.6 |
| 25 | Turnout sleepers of length up to 2.85 m | Each | 1520.00 | 143.09 | 2,17,496.8 |
| 26 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 1950.00 | 171.71 | 3,34,834.5 |
| 27 | Sleepers of length more than 4.20 m | Each | 750.00 | 186.02 | 1,39,515 |
| 28 | Depth of 250 mm below bottom of sleeper for Turnouts | TRM | 500.00 | 689.48 | 3,44,740 |
| 29 | Extra to item nos. from 081011 to 081018 and from 081021 to 081028 for disposal of muck at a distance beyond 50m for every additional lead of 50 metres or part thereof up to 500 metres for 1 TRM in station yard / cutting. | Each | 500.00 | 5.76 | 2,880 |
| 30 | Extra to item nos. from 081011 to 081018 and from 081021 to 081028 for disposal of muck for additional lift of 1 metre or part thereof beyond 3 metre lift in case of disposal of muck from track f o r 1 TRM in station yard / cutting. | Each | 500.00 | 12 | 6,000 |
| 31 | Lifting and packing for regrading the existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in- charge. | TRM | 1000.00 | 185.83 | 1,85,830 |
| 32 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 85000.00 | 27.33 | 23,23,050 |
| 33 | For PSC sleeper Track with Sleeper Density of 1540 Sleepers/Km or more | TRM | 8500.00 | 108.42 | 9,21,570 |
| 34 | For PSC Sleeper | TRM | 8000.00 | 92.94 | 7,43,520 |
| 35 | 1 in 8½ PSC layout | Set | 18.00 | 11,894.27 | 2,14,096.86 |
| 36 | 1 in 12 PSC layout | Set | 22.00 | 15,486.63 | 3,40,705.86 |
| 37 | 1 in 8½ Derailing Switch | Set | 20.00 | 1,691.82 | 33,836.4 |
| 38 | Packing of isolated loose PSC sleepers on plain track below the bottom of the sleepers and surrounding through out its length duly opening two galas on either side of the renewed sleepers and packing the sleeper to bring the track to normal speed including gauging, aligning, squaring of sleepers and sectioning of ballast to the required profile with all contractor's labour, tools and plant etc. including all lead and lift and crossing of tracks where ever necessary complete and as directed by the Engineer-in-charge. | Sleeper | 600.00 | 84.09 | 50,454 |
| 39 | For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more | TRM | 1000.00 | 184.91 | 1,84,910 |
| 40 | Extra over Items 132011 to 132014 for working in yards | TRM | 1000.00 | 47.99 | 47,990 |
| 41 | Without Rail tensor | TRM | 5000.00 | 34.21 | 1,71,050 |
| 42 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in- charge to keep drains clean and clear in cuttings etc. | RM | 15000.00 | 33.61 | 5,04,150 |
| 43 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 140000.00 | 15.47 | 21,65,800 |
| 44 | Trimming of tree branches coming within 6m of centre line of track & those obstructing views of Curves/LCs / Signal / Indicator at locations in section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. Note: Girth of more than 20 cm will only be considered as tree branch. | Each | 200.00 | 177.84 | 35,568 |
| 45 | For 60 Kg Rails | RM | 2000.00 | 47.33 | 94,660 |
| 46 | For 60 Kg Rails | TRM | 3000.00 | 65.31 | 1,95,930 |
| 47 | Hectometre Post | Each | 400.00 | 99.79 | 39,916 |
| 48 | Curve details, SE, Versine, Station Nos. etc. per station. | Each | 2000.00 | 54.05 | 1,08,100 |
| 49 | Bridge Tablet | Each | 190.00 | 44.1 | 8,379 |
| 50 | HFL, FSL & DL on Bridge Pier / Abutment | Each | 95.00 | 668.2 | 63,479 |
| 51 | Miscellaneous General Boards, Jurisdiction Boards, Structures etc. | Sqm | 220.00 | 110.22 | 24,248.4 |
| 52 | For day time block working | TRM | 55000.00 | 19.74 | 10,85,700 |
| 53 | Removing and refixing of guard Rails over slab bridges during machine packing with all contractor's men and materials duly removing fittings, leading guard rails to bridge approaches, lifting, dragging, positioning and crossing of track etc, and as directed by Engineer In charge. | TRM | 1000.00 | 109.32 | 1,09,320 |
| 54 | 60 Kg - 110/90 UTS - Outside Track | Each | 50.00 | 216.45 | 10,822.5 |
| 55 | 60 Kg - 110/90 UTS - On Running Line | Each | 50.00 | 277.33 | 13,866.5 |
| 56 | On Running Line | Each | 200.00 | 69.89 | 13,978 |
| 57 | Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Sleeper Spacer with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992. | Each | 3500.00 | 71.85 | 2,51,475 |
| 58 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 100.00 | 117.1 | 11,710 |
| 59 | For lead up to 500 metre. | MT | 500.00 | 399.09 | 1,99,545 |
| 60 | For lead beyond 500 metre and up to 1 Km. | MT | 200.00 | 514.73 | 1,02,946 |
| 61 | During period of traffic block | MT | 360.00 | 30.54 | 10,994.4 |
| 62 | For lead up to 500 metres | MT | 300.00 | 310.74 | 93,222 |
| 63 | For lead beyond 500 metre and up to 1 Km | MT | 150.00 | 460.7 | 69,105 |
| 64 | Extra to Item no. 172031 and 172032 with contractor's Rail Dolly/Dip Lorry. | MT | 300.00 | 30.98 | 9,294 |
| 65 | Lead beyond 100 Km and up to 150 Km | MT | 200.00 | 907.76 | 1,81,552 |
| 66 | Lead beyond 100 Km and up to 150 Km | MT | 300.00 | 788.23 | 2,36,469 |
| 67 | Extra for every Km per MT beyond 150 Km over item no. 172057 | MT-Km | 10000.00 | 2.98 | 29,800 |
| 68 | From DMT - During period of traffic block | MT | 250.00 | 173.05 | 43,262.5 |
| 69 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 500.00 | 388.3 | 1,94,150 |
| 70 | All type of PSC sleepers | MT | 500.00 | 424.83 | 2,12,415 |
| 71 | P.Way fittings of all types and other similar loose items | MT | 100.00 | 402.25 | 40,225 |
| 72 | Caution Indicator Board of size 1400mmx400mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 20.00 | 5,540.12 | 1,10,802.4 |
| 73 | Speed Indicator Board of equilateral triangular shape having each side of 1000mm with back support frame fixed to vertical post of MS angle of size 50mmx50mmx6mm of 3650 mm long | Each | 30.00 | 4,791.62 | 1,43,748.6 |
| 74 | Termination Indicator Board of Circular shape having diameter of 1000mm with back support frame welded to vertical post of MS angle of size 50mmx50mmx6mm of 3950 mm long | Each | 40.00 | 6,611.39 | 2,64,455.6 |
| 75 | Manufacturing, supplying and fixing Curve Indicator / Point Indicator / SEJ Boards to be provided at various locations on formation, made out of MS sheet 2mm thick of size 450mm x 300mm duly fixed with MS frame of 25mm x 25mm x 3mm angle welded to 50mm x 50mm x 3mm MS angle, 1000mm long post split and bent 100mm at bottom end with all lead & lift as per specification and including painting of details with enamel paint, as directed by Engineer in-charge (Earthwork & concreting will be paid separately) | Each | 209.00 | 1,013.1 | 2,11,737.9 |
| 76 | Fixing vertically the unserviceable PSC sleepers at locations of tress-passing, railway boundary or to make temporary store by excavating trench, fixing PSC sleeper in trench and filling back open trench. | Each | 300.00 | 156.47 | 46,941 |
| 77 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the Engineer-in-charge. Note: Earth-work will to be paid separately under relevant item. | Each | 40.00 | 4,135.77 | 1,65,430.8 |
| 78 | Supplying and spraying in specified proportion Weedicide Chemical, capable to kill entire weed on track / cess / embankment with all labour, material, tools & plants etc. complete job in all respect. Scientific name of the chemical is Isopropylamine Salt of Glyphosate, in which active ingredient is Glyphosate (41%), colour is light amber to brownish, very low in toxicity and has favourable environmental characteristics. It will be ensured that no weed growth occurs up to six months period, otherwise re- spraying shall be done by the contractor free of cost. | Sqm | 100000.00 | 0.63 | 63,000 |
| 79 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 900.00 | 752.64 | 6,77,376 |
| 80 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 600.00 | 889.42 | 5,33,652 |
| 81 | Tractor with Trolley for local transportation or other misc. works. | Hour | 500.00 | 199.17 | 99,585 |
| 82 | Manufacture and supply of Precast gradient Posts of size 1.65 x 0.60 x 0.075 m in RCC 1:2:4 mix, engraving letters and leading to work spot, fixing in position with CC 1:3:6 concrete duly making pits of size as required, painting the post, writing the letters on both sides of posts in 2 coats with enamel paint of approved quality to the Railways drawings/IRPWM with contractor's materials, cement, steel, labour, tools, plant, with all lead and lifts etc., complete as per specifications and as directed by the Engineer-in-charge. Note: Excavation, Concrete and steel work will be paid under relevant items. | Each | 250.00 | 545.04 | 1,36,260 |
| Schedule total | ₹1,95,33,042.88 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
drmwbsl142026t1.pdf
ATTACHMENT
GCC-2022-uptoACS10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
AnnexureVIB.pdf
ATTACHMENT
AnnexureVIAFormatofEMDandPBG.pdf Annexure VIA Format of EMD and PBG
ATTACHMENT
PCEcircular.pdf
ATTACHMENT
BeneficiaryName.pdf
ATTACHMENT
AnnexureVIAFormatofEMDandPBG.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .