Repair Renovation Govt Degree College Daulatpur Chowk Tehsil Ghanari Distt Una HP SH CO Truss on the Roof of Existing Science Block Building for safety of lanter and walls from rain water

Demolishing brick tile covering in terracing including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete M-25 (M-twenty five) design mix with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre mechanically mixed and vibrated including curing complete excluding cost of form work in walls and reinforcement reinforced concrete (any thickness not less than 0.10 meter thickness) including attached buttresses pilasters plinth and string courses etcetera and their caps upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and laying in position specified grade of reinforced cement concrete work M-25 (M-twenty five) design mix with minimum cement contents not less than 400 kgs.(four hundred kilogram) per cubic metre including curing complete excluding cost of form work and reinforcement for reinforced concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level upto all floor level as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per CPWD specifications 2019 in Columns, Pillars, Piers, Abutments, Posts and Struts as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame 30×30×5mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies upto any height in all floor level of propping and centring below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced cement concrete and plain concrete work as per CPWD specifications 2019 in Lintels, beams, plinth beams, girders, bressumers and cantilevers as per the direction by the Engineer in charge upto any floor level including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing steel reinforcement and Thermo-Mechanically Treated bars of grade Fe-500D or more approved make i.e. SAIL, RINL,Shyam Steel/TISCO, Jindal Panther (JSPL) for reinforced cement concrete work including bending cutting straightning and placing in position binding all complete upto any floor level/height as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortor 1:6 (one cement: six coarse sand) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing glazing with float glass panes of 5 mm (five millimeter) thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item) as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing M.S. (mild steel) grills of required patterns in wooden frames of windows etctra with M.S. (mild steel) Flats, square or round bars with round headed bolts and nuts or by screws.Fixed to openings /wooden frames with rawl plugs screws etctra as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with ISI (Indian Standard Institution), IS : 3564, (Indian standard :Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 250x16mm(two hundred fifty into sixteen millimeter ) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 250x10mm (two hundred fifty into ten millimeter ) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimeter ) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing aluminium hanging floor door stopper.ISI(Indian Standards Institute) marked, anodised (anodic coating not less then grade AC 10(ten) as per IS :1868 (indian standard one thousand eight hundred sixty eight ) transparent or dyed torequired coluor and shade,with necessary screws etctra complete. Twin rubber stopper including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions make of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge for fixed portion (Powder coated aluminium (minimum thickness of powder coating 50 micron) (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing aluminium work for doors, windows, ventilators and partitions ake of Hindco Co., Jindal India Aluminum Co. with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately Powder coated aluminium (minimum thickness of powder coating 50 micron) as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing 12mm (twelve millimeter) thick make of Novapan, Kitply, National Archid Ply, Action Tesa, Green Pre-laminated particle board with decorative lamination on both sides,flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings as per the direction by the Engineer-in-charge including entire carriage of materials with in all leads and lifts including other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm(fifteen into three millimeter) and nuts & bolts complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. fan clamp type I or II of 16mm(sixteen millimetre) dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standrad design complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying 40 mm(forty millimeter) thick with 20 mm (twenty millimeter) nominal size stone aggregate Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded/crushed stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etcetera complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 40 mm (forty millimeter) wide and 4 mm (four millimeter) thick glass strips in joints of terrazo/ cement concrete floors as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 110mm (one hundred ten millimeter) diameter on wall face unplasticised Rigid PVC rain water pipes Supreme AKG, Finolex, Prince, Kisan, SEMC, Diplast make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimeter) gap for thermal expansion,-Single socketed pipes as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax, good service tax or other taxes imposed by the Government.

15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:4 ( one cement : four Fine sand) complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

15 mm ( fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 ( one cement : six Fine sand) complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including water thinnable priming coat Berger (castle) Jenson & Nicholson Paints, Aqualac make with cement primer in all floor level/height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point ninety liter per ten square meter) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (zero point eighty liter per ten square meter) of approved brand and manufacture upto all heights as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Finishing walls with water proofing cement paint of required shade :New work (Two or more coats applied @ 3.84 kg/10 sqm( three point eighty four kilogram per ten square meter)) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 1 mm ( One millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing prepainted steel sheet Tata Durashine make roofing over steel truss providing and fixing kole metal or equal pre-painted single trapezoidal profiled sheeting 0.60mm (zero point sixty millimeter) thickness having 1060mm ( one thousand sixty millimeter) cover width overall width 1126mm (one thousnd one hundred twenty six millimeter) 28 mm (twenty eighty millimeter) crest depth at 353mm (three hundred fifty three millimeter) plus 2 (two) center to center to crest distance. There will be no ribs at the center for stiffening having crest depth 2.5mm ( two point five millimeter) the main crest width at top 25mm (twenty five millimeter) at the lower 81mm (eighty one millimeter) base metal of cold rolled steel cast with zinc waiting top coat with regular modified polyesters coating of approved shade and balancing reverse coat with polyester paint including fixing of sheet with self drilling and self taping screws of size 5.5mm (five point five millimeter) dia and 55mm (fifty five millimeter)length with EPOM seal complete in all respect as per approved specification, drawintg, design any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing pre-painted sheet Tata Durashine make ridges or hips 60 cm (sixty centimeter) overall of kole metal single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeter ) thickness having 1060mm (one thousand sixty millimeter) cover width cover all width 1126mm (one thousand one hundred twenty six millimeter) 28mm (thwenty eight millimeter) crest depth at 353mm (three hundred fifty three millimeter) plus 2 (two) center to center crest distance. There will be two ribs at the center for stiffening having crest depth of 2.5mm ( two point five millimeter) the main crest width at top 25mm (twenty five millimeter) and at lower 81mm (eighty one millimeter) base metal of cold rolled steel cast with zinc waiting top coat with regular modified polyesters coating of approved shade and balancing reverse coat with polyester paint including fixing of sheet with self drilling and self taping screws of size 5.5mm (five point five millimeter) dia and 55mm (fifty five millimeter)length with EPOM seal complete in all respect as per approved specification, drawintg, design any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing pre-painted sheet Tata Durashine make valley 60 cm (sixty centimeter) overall of kolar metal single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeter ) thickness having 1060mm (one thousand sixty millimeter) cover width cover all width 1126mm (one thousand one hundred twenty six millimeter) 28mm (thwenty eight millimeter) crest depth at 353mm (three hundred fifty three millimeter) plus 2 (two) center to center crest distance. There will be two ribs at the center for stiffening having crest depth of 2.5mm ( two point five millimeter) the main crest width at top 25mm (twenty five millimeter) and at lower 81mm (eighty one millimeter) base metal of cold rolled steel cast with zinc waiting top coat with regular modified polyesters coating of approved shade and balancing reverse coat with polyester paint including fixing of sheet with self drilling and self taping screws of size 5.5mm (five point five millimeter) dia and 55mm (fifty five millimeter)length with EPOM seal complete in all respect as per approved specification, drawintg, design any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Providing and fixing 15 cm (fifteen centimeter) wide 45 cm (forty five centimeter s) overall semicircular 0.63mm (zero point sixty three millimeter) thick sheet Tata make plain G.I. sheetgutter with iron brackets 40x3mm (forlty into three millimeter s) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete upto all floor level as per design as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rate includes octroi, royality, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing M.S.BP Sheet TATA make 1.66 to 2.00 ( One point sixty six to Two point Zero Zero) milimeter thick in eaves board /facia/soffit /ceilng including cutting ,fixing and welding to steel roof members and applying a coatof red lead primer complete any height/any floor level as per direction by the Engineer in charge (base member of steel work shall be measured and paid for separately) complete in all respect including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, sale tax, goods service tax, labour cess or other taxes imposed by the Government.

Steel work in built up tubular (round, square or rectangular hollow Hot finished welded type tubes etc.) trusses etc San HARVIC Steelman Industries P.D. Industries metal windows, Chandni Industires Ganpati Udyog (Rajpura) Tata and Jindal make., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete upto any floor level/ height as per the direction by the Engineer in charge including entire carriage of materials with in all leads and lifts and other incidentials . The rates are inclusive octroi, royality, Malkana, toll tax, goods service tax, labour cess or other taxes imposed by the Government.

Please Enable Macros to View BoQ information